From: Jouni Karvo <Jouni.Karvo@iki.fi>
To: "Tycho Lürsen" <tycholursen@gmail.com>, linux-media@vger.kernel.org
Subject: Re: cx23885 risc op code error with DvbSKY T982
Date: Wed, 01 Jul 2015 12:11:02 +0300 [thread overview]
Message-ID: <5593AEA6.7020901@iki.fi> (raw)
In-Reply-To: <55911239.4000709@iki.fi>
29.06.2015, 12:39, Jouni Karvo kirjoitti:
> 22.06.2015, 12:55, Tycho Lürsen kirjoitti:
>> I've got a couple of T982 cards. Running Debian Jessie, with kernel
>> 4.1-rc8, I cannot reproduce your errors.
>> Only difference might be:
>> I synced the silabs drivers with upstream and used the patch from:
>
> hi,
>
> I tested with 4.1.0 (which produced the errors. 4.1.0 with
> media_build produced the errors. I did not test that with the patch,
> as because of another kernel bug (in mdraid) I switched to 4.0.6.
>
> With 4.0.6 this error does not seem to happen with neither card.
Just as I reported, it happened. Then I got the media_build driver from
Jun 25 (which seems to include the IF selection patch), and there it
happens again...
Jun 30 21:16:40 xpc kernel: [11870.833240] cx23885[1]: mpeg risc op code
error
Jun 30 21:16:40 xpc kernel: [11870.833244] cx23885[1]: TS1 B - dma
channel status dump
Jun 30 21:16:40 xpc kernel: [11870.833247] cx23885[1]: cmds: init risc
lo : 0x924d0000
Jun 30 21:16:40 xpc kernel: [11870.833248] cx23885[1]: cmds: init risc
hi : 0x00000000
Jun 30 21:16:40 xpc kernel: [11870.833250] cx23885[1]: cmds: cdt
base : 0x00010580
Jun 30 21:16:40 xpc kernel: [11870.833252] cx23885[1]: cmds: cdt
size : 0x0000000a
Jun 30 21:16:40 xpc kernel: [11870.833254] cx23885[1]: cmds: iq
base : 0x00010400
Jun 30 21:16:40 xpc kernel: [11870.833256] cx23885[1]: cmds: iq
size : 0x00000010
Jun 30 21:16:40 xpc kernel: [11870.833257] cx23885[1]: cmds: risc pc
lo : 0x924d000c
Jun 30 21:16:40 xpc kernel: [11870.833259] cx23885[1]: cmds: risc pc
hi : 0x00000000
Jun 30 21:16:40 xpc kernel: [11870.833261] cx23885[1]: cmds: iq wr
ptr : 0x00004103
Jun 30 21:16:40 xpc kernel: [11870.833263] cx23885[1]: cmds: iq rd
ptr : 0x00004100
Jun 30 21:16:40 xpc kernel: [11870.833264] cx23885[1]: cmds: cdt
current : 0x000105c8
Jun 30 21:16:40 xpc kernel: [11870.833266] cx23885[1]: cmds: pci
target lo : 0xaed882f0
Jun 30 21:16:40 xpc kernel: [11870.833268] cx23885[1]: cmds: pci
target hi : 0x00000000
Jun 30 21:16:40 xpc kernel: [11870.833270] cx23885[1]: cmds: line /
byte : 0x01610000
Jun 30 21:16:40 xpc kernel: [11870.833272] cx23885[1]: risc0:
0x1c0002f0 [ write sol eol count=752 ]
Jun 30 21:16:40 xpc kernel: [11870.833275] cx23885[1]: risc1:
0xaed882f0 [ readc sol eol irq2 23 22 20 19 resync count=752 ]
Jun 30 21:16:40 xpc kernel: [11870.833279] cx23885[1]: risc2:
0x00000000 [ INVALID count=0 ]
Jun 30 21:16:40 xpc kernel: [11870.833281] cx23885[1]: risc3:
0x1c0002f0 [ write sol eol count=752 ]
Jun 30 21:16:40 xpc kernel: [11870.833284] cx23885[1]: (0x00010400) iq
0: 0x80200080 [ sync 21 count=128 ]
Jun 30 21:16:40 xpc kernel: [11870.833286] cx23885[1]: (0x00010404) iq
1: 0x87ff3140 [ sync eol irq2 irq1 23 22 21 20 19 18 cnt1 cnt0 13 12
count=320 ]
Jun 30 21:16:40 xpc kernel: [11870.833291] cx23885[1]: (0x00010408) iq
2: 0x01000000 [ INVALID irq1 count=0 ]
Jun 30 21:16:40 xpc kernel: [11870.833293] cx23885[1]: (0x0001040c) iq
3: 0x00000000 [ INVALID count=0 ]
Jun 30 21:16:40 xpc kernel: [11870.833295] cx23885[1]: (0x00010410) iq
4: 0x1c0002f0 [ write sol eol count=752 ]
Jun 30 21:16:40 xpc kernel: [11870.833298] cx23885[1]: iq 5:
0xaed88bc0 [ arg #1 ]
Jun 30 21:16:40 xpc kernel: [11870.833300] cx23885[1]: iq 6:
0x00000000 [ arg #2 ]
Jun 30 21:16:40 xpc kernel: [11870.833301] cx23885[1]: (0x0001041c) iq
7: 0x71000000 [ jump irq1 count=0 ]
Jun 30 21:16:40 xpc kernel: [11870.833304] cx23885[1]: iq 8:
0x1c0002f0 [ arg #1 ]
Jun 30 21:16:40 xpc kernel: [11870.833306] cx23885[1]: iq 9:
0xaed88000 [ arg #2 ]
Jun 30 21:16:40 xpc kernel: [11870.833307] cx23885[1]: (0x00010428) iq
a: 0x00000000 [ INVALID count=0 ]
Jun 30 21:16:40 xpc kernel: [11870.833309] cx23885[1]: (0x0001042c) iq
b: 0x1c0002f0 [ write sol eol count=752 ]
Jun 30 21:16:40 xpc kernel: [11870.833312] cx23885[1]: iq c:
0xaed882f0 [ arg #1 ]
Jun 30 21:16:40 xpc kernel: [11870.833314] cx23885[1]: iq d:
0x00000000 [ arg #2 ]
Jun 30 21:16:40 xpc kernel: [11870.833315] cx23885[1]: (0x00010438) iq
e: 0x1c0002f0 [ write sol eol count=752 ]
Jun 30 21:16:40 xpc kernel: [11870.833318] cx23885[1]: iq f:
0xaed885e0 [ arg #1 ]
Jun 30 21:16:40 xpc kernel: [11870.833320] cx23885[1]: iq 10:
0x9beae2ae [ arg #2 ]
Jun 30 21:16:40 xpc kernel: [11870.833320] cx23885[1]: fifo: 0x00005000
-> 0x6000
Jun 30 21:16:40 xpc kernel: [11870.833321] cx23885[1]: ctrl: 0x00010400
-> 0x10460
Jun 30 21:16:40 xpc kernel: [11870.833323] cx23885[1]: ptr1_reg:
0x00005bf0
Jun 30 21:16:40 xpc kernel: [11870.833325] cx23885[1]: ptr2_reg:
0x000105c8
Jun 30 21:16:40 xpc kernel: [11870.833326] cx23885[1]: cnt1_reg:
0x00000003
Jun 30 21:16:40 xpc kernel: [11870.833328] cx23885[1]: cnt2_reg:
0x00000001
next prev parent reply other threads:[~2015-07-01 9:11 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-21 18:19 cx23885 risc op code error with DvbSKY T982 Jouni Karvo
2015-06-22 9:43 ` Jouni Karvo
2015-06-22 9:55 ` Tycho Lürsen
2015-06-29 9:39 ` Jouni Karvo
2015-07-01 9:11 ` Jouni Karvo [this message]
2015-07-01 9:13 ` Hans Verkuil
2015-07-01 10:06 ` Jouni Karvo
2015-06-22 12:00 ` Jouni Karvo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5593AEA6.7020901@iki.fi \
--to=jouni.karvo@iki.fi \
--cc=linux-media@vger.kernel.org \
--cc=tycholursen@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.