Re: [lm-sensors] Fan Speed From Asus X99-A

[Guenter Roeck <linux@roeck-us.net>]

Hi Richard,

On 07/03/2015 10:26 AM, Richard wrote:
> How do I have lm-sensors report the fan speed of the fans attached to my
> Asus X99-A motherboard? (Right now I can only seed the fan speeds by
> booting into BIOS.)
>
> lm-sensors does a good job of temperatures:
>
> $ sensors
> coretemp-isa-0000
> Adapter: ISA adapter
> Physical id 0:  +41.0 C  (high = +87.0 C, crit = +105.0 C)
> Core 0:         +33.0 C  (high = +87.0 C, crit = +105.0 C)
> Core 1:         +33.0 C  (high = +87.0 C, crit = +105.0 C)
> Core 2:         +33.0 C  (high = +87.0 C, crit = +105.0 C)
> ...
>
> but no fan speeds.
>
> My /etc/conf.d/lm_sensors file looks like:
>
> ======> # Generated by sensors-detect on Fri Jul  3 10:01:46 2015
> # This file is sourced by /etc/init.d/lm_sensors and defines the modules to
> # be loaded/unloaded.
> #
> # The format of this file is a shell script that simply defines variables:
> # HWMON_MODULES for hardware monitoring driver modules, and optionally
> # BUS_MODULES for any required bus driver module (for example for I2C or
> SPI).
>
> # Load modules at startup
> LOADMODULES=yes
>
> # Initialize sensors at startup
> INITSENSORS=yes
>
> HWMON_MODULES="coretemp nct6775"
> =======
>
> Both coretemp and nct6775 modules are loaded according to lsmod.
>
> Any idea on how to receive fan speeds?
>

The following links might give you a hint.

http://www.lm-sensors.org/wiki/FAQ/Chapter3#Mysensorshavestoppedworkinginkernel2.6.31

http://lists.lm-sensors.org/pipermail/lm-sensors/2014-September/042744.html

Guenter


_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors