Re: [PATCH 5/9] iio: mma8452: add devicetree documentation

[Martin Fuzzey <mfuzzey@parkeon.com>]

On 05/07/15 13:48, Jonathan Cameron wrote:
> On 04/07/15 14:55, Martin Kepplinger wrote:
>> Signed-off-by: Martin Kepplinger <martin.kepplinger@theobroma-systems.com>
>> Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
> This is trivial enough I'll take it without a device tree ack (after a few days)
> but convention is to CC all device tree patches to the maintainers of devicetree
> bindings as well as the devicetree list.

Currently the binding is covered by 
Documentation/devicetree/bindings/i2c/trivial-devices.txt
Shouldn't that one be removed now that a full binding document is being 
created?

Regards,

Martin

> Jonathan
>> ---
>>   .../devicetree/bindings/iio/accel/mma8452.txt       | 21 +++++++++++++++++++++
>>   1 file changed, 21 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/iio/accel/mma8452.txt
>>
>> diff --git a/Documentation/devicetree/bindings/iio/accel/mma8452.txt b/Documentation/devicetree/bindings/iio/accel/mma8452.txt
>> new file mode 100644
>> index 0000000..8d98e05
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iio/accel/mma8452.txt
>> @@ -0,0 +1,21 @@
>> +Freescale MMA8452Q, MMA8453Q, MMA8652FC or MMA8653FC triaxial accelerometer
>> +
>> +Required properties:
>> +
>> +  - compatible: should be "fsl,mma8653", "fsl,mma8652", "fsl,mma8453" or
>> +    "fsl,mma8452" respectively.
>> +  - reg: the I2C address of the chip
>> +
>> +Optional properties:
>> +
>> +  - interrupt-parent: should be the phandle for the interrupt controller
>> +  - interrupts: interrupt mapping for GPIO IRQ
>> +
>> +Example:
>> +
>> +	mma8653fc@1d {
>> +		compatible = "fsl,mma8653";
>> +		reg = <0x1d>;
>> +		interrupt-parent = <&gpio1>;
>> +		interrupts = <5 0>;
>> +	};
>>