From: "Jindal, Sonika" <sonika.jindal@intel.com>
To: Daniel Vetter <daniel@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH] [RFC] drm/i915: Handle HPD when it has actually occurred
Date: Mon, 06 Jul 2015 14:11:12 +0530 [thread overview]
Message-ID: <559A3F28.6050008@intel.com> (raw)
In-Reply-To: <20150706083618.GH2156@phenom.ffwll.local>
On 7/6/2015 2:06 PM, Daniel Vetter wrote:
> On Mon, Jul 06, 2015 at 11:23:53AM +0530, Sonika Jindal wrote:
>> Writing to PCH_PORT_HOTPLUG for each interrupt is not required.
>> Handle it only if hpd has actually occurred like we handle other
>> interrupts.
>>
>> Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
>> ---
>> Hi,
>>
>> I see we don't check for hotplug_trigger before processing the HPD for any of the platform. Is there any reason for this?
>> For SKL, if I let write to PCH_PORT_HOTPLUG happen for all interrupts, somehow this register gets an invalid value at one point and it zeroes it out.
>> If I put this check before handling HPD, hotplug behaves fine.
>> Please let me know if you see any issue with this approach.
>
> Nice find, this sounds really intrigueing, at least for cpt/ibx platforms.
> I'm not sure whether what will happen with atom/i9xx platforms though
> since the irq bits are different there. But at least bxt has a FIXME
> comment that suggest we do need to save the sticky bits on those platforms
> too.
>
> If we can fix this up for all platforms then I think a subsequent patch
> could try to re-enable the hpd checks in the hdmi ->detect function and
> make use spec compliant. Then after maybe 1-2 kernel releases of testing
> we'll know whether it really works.
>
> But I'd really want to enable this everywhere just to have maximal test
> coverage - we did have reports on all platforms so it seems a generic
> issue.
>
I think only cpt/ibx suffer from this. Bxt already set port_hotplug_stat
only when hpd occurs.
Is there a process to get this checked on all platforms, which the fix I
suggested?
I can only test on SKL as of now.
Regards,
Sonika
> Thanks, Daniel
>
>>
>> Thanks,
>> Sonika
>>
>> drivers/gpu/drm/i915/i915_irq.c | 11 ++++++-----
>> 1 file changed, 6 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
>> index a6fbe64..2d47372 100644
>> --- a/drivers/gpu/drm/i915/i915_irq.c
>> +++ b/drivers/gpu/drm/i915/i915_irq.c
>> @@ -1760,11 +1760,12 @@ static void cpt_irq_handler(struct drm_device *dev, u32 pch_iir)
>> u32 dig_hotplug_reg;
>> u32 pin_mask, long_mask;
>>
>> - dig_hotplug_reg = I915_READ(PCH_PORT_HOTPLUG);
>> - I915_WRITE(PCH_PORT_HOTPLUG, dig_hotplug_reg);
>> -
>> - pch_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger, dig_hotplug_reg, hpd_cpt);
>> - intel_hpd_irq_handler(dev, pin_mask, long_mask);
>> + if (hotplug_trigger) {
>> + dig_hotplug_reg = I915_READ(PCH_PORT_HOTPLUG);
>> + I915_WRITE(PCH_PORT_HOTPLUG, dig_hotplug_reg);
>> + pch_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger, dig_hotplug_reg, hpd_cpt);
>> + intel_hpd_irq_handler(dev, pin_mask, long_mask);
>> + }
>>
>> if (pch_iir & SDE_AUDIO_POWER_MASK_CPT) {
>> int port = ffs((pch_iir & SDE_AUDIO_POWER_MASK_CPT) >>
>> --
>> 1.7.10.4
>>
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx@lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-07-06 8:41 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-06 5:53 [PATCH] [RFC] drm/i915: Handle HPD when it has actually occurred Sonika Jindal
2015-07-06 8:36 ` Daniel Vetter
2015-07-06 8:41 ` Jindal, Sonika [this message]
2015-07-06 12:24 ` Daniel Vetter
2015-07-06 8:49 ` Ville Syrjälä
2015-07-06 9:01 ` Jindal, Sonika
2015-07-06 11:18 ` Ville Syrjälä
2015-07-07 8:52 ` [PATCH] " Sonika Jindal
2015-07-07 13:21 ` Ville Syrjälä
2015-07-08 5:10 ` Jindal, Sonika
2015-07-08 8:48 ` Ville Syrjälä
2015-07-08 11:37 ` Sonika Jindal
2015-07-08 15:18 ` Daniel Vetter
2015-10-01 14:17 ` Jani Nikula
2015-07-08 8:13 ` shuang.he
2015-07-06 10:08 ` Sonika Jindal
2015-07-07 5:55 ` shuang.he
2015-07-06 9:54 ` [PATCH] [RFC] " shuang.he
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=559A3F28.6050008@intel.com \
--to=sonika.jindal@intel.com \
--cc=daniel@ffwll.ch \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.