From: "\"Jose Núñez-Martínez (CTTC)\"" <jose.nunez@cttc.cat>
To: Michal Kazior <michal.kazior@tieto.com>
Cc: "ath10k@lists.infradead.org" <ath10k@lists.infradead.org>
Subject: Re: Question on bssid mask with ath10k
Date: Mon, 06 Jul 2015 15:23:12 +0200 [thread overview]
Message-ID: <559A8140.7020000@cttc.cat> (raw)
In-Reply-To: <CA+BoTQ=7tXKdr6QoWiaWWVvGScfWkc5+BR0HYN0Odo6KDRAHMw@mail.gmail.com>
Hi,
I upgraded to CT kernel and firmware. Now I have: Kernel is 4.0.4 from
CT and Firmware is 10.1.467-ct-com-full-014-96d543
However I cannot bring up two virtal interfaces associated to one
physical device.
The output of "iw dev" command:
phy#1
Interface moni2
ifindex 9
wdev 0x100000002
addr 04:f0:21:18:26:a5
type managed
Interface wlan2
ifindex 7
wdev 0x100000001
addr 04:f0:21:18:26:a5
type IBSS
This is the error shown when I try to bring up moni2 interface (ifconfig
moni2 up): "SIOCSIFFLAGS: Name not unique on network"
Jose
On 07/03/2015 12:45 PM, Michal Kazior wrote:
> On 3 July 2015 at 12:17, "Jose Núñez-Martínez (CTTC)"
> <jose.nunez@cttc.cat> wrote:
>> I'm trying to set BSSID mask in ath10k so that data packets with spoofed mac
>> destination address can be received (and not dropped) by the card.
>>
>> Apparently the way bssid mask is managed has changed from ath5k and ath9k
>> since there are not "ath5k_hw_set_bssid_mask" or
>> "ath9k_htc_set_mac_bssid_mask" kind of functions.
>>
>> Anyone tried this?
> There's no explicit control over Rx filters in ath10k that I know of.
> This is abstracted away by other firmware higher-level commands. One
> way to influence Rx filter (and BSSID mask) is to start a monitor vdev
> in firmware. This apparently works[1] but 636 will crash on you again
> if you do that. You'll need Ben's CT firmware.
>
> [1]: http://lists.infradead.org/pipermail/ath10k/2015-April/005095.html
>
>
> Michał
>
> _______________________________________________
> ath10k mailing list
> ath10k@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/ath10k
--
Jose Núñez-Martínez, PhD
Researcher email: jose.nunez@cttc.cat
COMNET Division Web: http://networks.cttc.cat
Centre Tecnològic de Telecomunicacions de Catalunya (CTTC)
Parc Mediterrani de la Tecnologia
Av. Carl Friedrich Gauss, 7 Ph.:+34 936452927
08860 Castelldefels - Barcelona Fax: +34 936452901
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2015-07-06 13:23 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-03 10:17 Question on bssid mask with ath10k "Jose Núñez-Martínez (CTTC)"
2015-07-03 10:45 ` Michal Kazior
2015-07-06 13:23 ` "Jose Núñez-Martínez (CTTC)" [this message]
2015-07-06 13:39 ` Ben Greear
2015-07-06 13:54 ` "Jose Núñez-Martínez (CTTC)"
2015-07-06 14:33 ` Ben Greear
2015-07-06 15:00 ` "Jose Núñez-Martínez (CTTC)"
2015-07-06 15:10 ` Ben Greear
2015-07-06 15:49 ` "Jose Núñez-Martínez (CTTC)"
2015-07-06 16:40 ` Ben Greear
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=559A8140.7020000@cttc.cat \
--to=jose.nunez@cttc.cat \
--cc=ath10k@lists.infradead.org \
--cc=michal.kazior@tieto.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.