From: Rongqing Li <rongqing.li@windriver.com>
To: <openembedded-devel@lists.openembedded.org>
Subject: Re: [PATCH][v2] squid: upgrade to 3.5.5
Date: Tue, 7 Jul 2015 08:47:52 +0800 [thread overview]
Message-ID: <559B21B8.1020300@windriver.com> (raw)
In-Reply-To: <CANBf+V2=eO4XoktBeG5fmniNoDMosLKfeXboN71eYW0SUhM8-w@mail.gmail.com>
On 2015年07月07日 03:26, Joe MacDonald wrote:
> Looks okay, but there's this in Martin's logs:
>
> squid-3.5.5: squid rdepends on libpam, but it isn't a build
> dependency? [build-deps]
>
> Can you update the recipe for that?
>
Ok, I will see it
-Roy
> -J.
>
> On Tue, Jun 16, 2015 at 11:03 PM, <rongqing.li@windriver.com> wrote:
>> From: Roy Li <rongqing.li@windriver.com>
>>
>> 1. Remove the squid-change-ksh-referen*.patch which is not needed, since
>> 3.5.5 did not use ksh by default.
>> 2. Update the checksum of COPYING,since the date in it has been changed.
>> 3. Define BUILDCXXFLAGS, otherwise the target gcc options -std=c++11 will
>> add into it, and lead to building failure since host gcc maybe not
>> support "-std=c++11"
>> 4. Assume to support GNU atomic operations by default, the running check
>> on cross-compile setup does not work
>>
>> Signed-off-by: Roy Li <rongqing.li@windriver.com>
>> ---
>> ...ge-ksh-reference-in-krb-ldap-helper-to-sh.patch | 39 ----------------------
>> .../squid/{squid_3.4.7.bb => squid_3.5.5.bb} | 9 ++---
>> 2 files changed, 5 insertions(+), 43 deletions(-)
>> delete mode 100644 meta-networking/recipes-daemons/squid/files/squid-change-ksh-reference-in-krb-ldap-helper-to-sh.patch
>> rename meta-networking/recipes-daemons/squid/{squid_3.4.7.bb => squid_3.5.5.bb} (88%)
>>
>> diff --git a/meta-networking/recipes-daemons/squid/files/squid-change-ksh-reference-in-krb-ldap-helper-to-sh.patch b/meta-networking/recipes-daemons/squid/files/squid-change-ksh-reference-in-krb-ldap-helper-to-sh.patch
>> deleted file mode 100644
>> index 8e03860..0000000
>> --- a/meta-networking/recipes-daemons/squid/files/squid-change-ksh-reference-in-krb-ldap-helper-to-sh.patch
>> +++ /dev/null
>> @@ -1,39 +0,0 @@
>> -squid: change ksh reference in krb ldap helper to sh
>> -
>> -Very simple cert_tool script with no ksh specifics.
>> -Change it to use sh so a package dependency doesn't
>> -get created to ksh.
>> -
>> -Upstream-Status: Pending
>> -
>> -Signed-off-by: Jim Somerville <Jim.Somerville@windriver.com>
>> -Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
>> ----
>> - helpers/external_acl/kerberos_ldap_group/cert_tool | 6 +++---
>> - 1 file changed, 3 insertions(+), 3 deletions(-)
>> -
>> -diff --git a/helpers/external_acl/kerberos_ldap_group/cert_tool b/helpers/external_acl/kerberos_ldap_group/cert_tool
>> -index 9f14959..8c4ea11 100644
>> ---- a/helpers/external_acl/kerberos_ldap_group/cert_tool
>> -+++ b/helpers/external_acl/kerberos_ldap_group/cert_tool
>> -@@ -1,4 +1,4 @@
>> --#!/bin/ksh
>> -+#!/bin/sh
>> - #
>> - # -----------------------------------------------------------------------------
>> - #
>> -@@ -64,9 +64,9 @@ QUIT
>> - # Create database for Sun ldap and pem file for Openldap
>> - #
>> - rm ${server}_[0-9]*.pem 2>/dev/null
>> --let i=0
>> -+i=0
>> - ls ${server}_[0-9]*.cert | while read file; do
>> -- let i=i+1
>> -+ i=`expr $i + 1`
>> - cat $file >> ${server}_$i.pem
>> - CA=`openssl x509 -noout -text -in ${server}_$i.pem | grep -i "CA:.*true"`
>> - if [ -n "$CA" ]; then
>> ---
>> -1.9.1
>> -
>> diff --git a/meta-networking/recipes-daemons/squid/squid_3.4.7.bb b/meta-networking/recipes-daemons/squid/squid_3.5.5.bb
>> similarity index 88%
>> rename from meta-networking/recipes-daemons/squid/squid_3.4.7.bb
>> rename to meta-networking/recipes-daemons/squid/squid_3.5.5.bb
>> index 7b00dfc..ac18e0f 100644
>> --- a/meta-networking/recipes-daemons/squid/squid_3.4.7.bb
>> +++ b/meta-networking/recipes-daemons/squid/squid_3.5.5.bb
>> @@ -16,17 +16,16 @@ SRC_URI = "http://www.squid-cache.org/Versions/v${MAJ_VER}/${MIN_VER}/${BPN}-${P
>> file://Set-up-for-cross-compilation.patch \
>> file://Skip-AC_RUN_IFELSE-tests.patch \
>> file://Fix-flawed-dynamic-ldb-link-test-in-configure.patch \
>> - file://squid-change-ksh-reference-in-krb-ldap-helper-to-sh.patch \
>> file://squid-use-serial-tests-config-needed-by-ptest.patch \
>> file://run-ptest \
>> file://volatiles.03_squid \
>> "
>>
>> LIC_FILES_CHKSUM = "file://COPYING;md5=c492e2d6d32ec5c1aad0e0609a141ce9 \
>> - file://COPYRIGHT;md5=2900f50789c498be8e9f1eb23b55cbe9 \
>> + file://errors/COPYRIGHT;md5=0fed8f1462f6fdbc62bb431bcb618f46 \
>> "
>> -SRC_URI[md5sum] = "9951034b10f7ee0f45a95cfae61c57c2"
>> -SRC_URI[sha256sum] = "7b423f3d3495a317503ca559ea535f80445fd7c4e3c3e268cb7a8c97c61af2b6"
>> +SRC_URI[md5sum] = "6aac5c2e9cbbeabcbf2e9e49a178a931"
>> +SRC_URI[sha256sum] = "741c24a307c50f0d845d53cabb66b36d91ce9a73c8a165eae5def5e4d11e6a0d"
>>
>> DEPENDS = "libtool krb5 openldap db cyrus-sasl"
>>
>> @@ -38,6 +37,8 @@ USERADD_PARAM_${PN} = "--system --no-create-home --home-dir /var/run/squid --she
>> PACKAGECONFIG ??= ""
>> PACKAGECONFIG[libnetfilter-conntrack] = "--with-netfilter-conntrack=${includedir}, --without-netfilter-conntrack, libnetfilter-conntrack"
>> EXTRA_OECONF += "--with-default-user=squid"
>> +export BUILDCXXFLAGS="${BUILD_CXXFLAGS}"
>> +CACHED_CONFIGUREVARS += "squid_cv_gnu_atomics=yes"
>>
>> TESTDIR = "test-suite"
>> do_compile_ptest() {
>> --
>> 1.9.1
>>
>> --
>> _______________________________________________
>> Openembedded-devel mailing list
>> Openembedded-devel@lists.openembedded.org
>> http://lists.openembedded.org/mailman/listinfo/openembedded-devel
>
>
>
--
Best Reagrds,
Roy | RongQing Li
prev parent reply other threads:[~2015-07-07 0:47 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-17 3:03 [PATCH][v2] squid: upgrade to 3.5.5 rongqing.li
2015-07-06 19:26 ` Joe MacDonald
2015-07-07 0:47 ` Rongqing Li [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=559B21B8.1020300@windriver.com \
--to=rongqing.li@windriver.com \
--cc=openembedded-devel@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.