From: Christian Zigotzky <chzigotzky@xenosoft.de>
To: linuxppc-dev@lists.ozlabs.org
Subject: PASEMI: PA6T board doesn't boot with the RC1 of kernel 4.2 anymore
Date: Fri, 10 Jul 2015 08:51:25 +0200 [thread overview]
Message-ID: <559F6B6D.2000002@xenosoft.de> (raw)
In-Reply-To: <559EF557.4040403@xenosoft.de>
Hi All,
The first bad commit:
http://git.kernel.org/cgit/linux/kernel/git/tip/tip.git/commit/?id=0d0b4c866bcce647f40d73efe5e90aeeb079050a
I replaced the following irq files with the old kernel 4.1 irq files:
~/Downloads/linux-4.2/linux-4.2-nemo$ cp
/home/christian/Downloads/linux-4.1/linux-4.1/include/linux/irq.h
include/linux/irq.h
~/Downloads/linux-4.2/linux-4.2-nemo$ cp
/home/christian/Downloads/linux-4.1/linux-4.1/include/linux/irqdesc.h
include/linux/irqdesc.h
~/Downloads/linux-4.2/linux-4.2-nemo$ cp
/home/christian/Downloads/linux-4.1/linux-4.1/kernel/irq/internals.h
kernel/irq/internals.h
~/Downloads/linux-4.2/linux-4.2-nemo$ cp
/home/christian/Downloads/linux-4.1/linux-4.1/kernel/irq/irqdesc.c
kernel/irq/irqdesc.c
~/Downloads/linux-4.2/linux-4.2-nemo$ cp
/home/christian/Downloads/linux-4.1/linux-4.1/kernel/irq/irqdomain.c
kernel/irq/irqdomain.c
~/Downloads/linux-4.2/linux-4.2-nemo$ cp
/home/christian/Downloads/linux-4.1/linux-4.1/kernel/irq/manage.c
kernel/irq/manage.c
~/Downloads/linux-4.2/linux-4.2-nemo$ cp
/home/christian/Downloads/linux-4.1/linux-4.1/kernel/irq/proc.c
kernel/irq/proc.c
I compiled the RC1 of kernel 4.2 with these old irq source code today.
I'm happy it boots. :-)
Rgds,
Christian
On 10 July 2015 at 00:27 AM, Christian Zigotzky wrote:
> Hi All,
>
> Many thanks for your help. You're right. It was something wrong with
> my last bisect. I did another bisect. I evaluated the one "sometimes
> boots" with good.
>
> Log:
>
> git clone
> git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
> linux-git
>
> git bisect start
>
> git bisect good b953c0d234bc72e8489d3bf51a276c5c4ec85345 (Linux 4.1)
>
> git bisect bad d770e558e21961ad6cfdf0ff7df0eb5d7d4f0754 (Linux 4.2-rc1)
>
> Output:
>
> Bisecting: 6261 revisions left to test after this (roughly 13 steps)
> [4570a37169d4b44d316f40b2ccc681dc93fedc7b] Merge tag 'sound-4.2-rc1'
> of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
>
> ----
>
> git bisect bad
>
> Output:
>
> Bisecting: 3295 revisions left to test after this (roughly 12 steps)
> [4e241557fc1cb560bd9e77ca1b4a9352732a5427] Merge tag 'for-linus' of
> git://git.kernel.org/pub/scm/virt/kvm/kvm
>
> ----
>
> git bisect bad
>
> Output:
>
> Bisecting: 1625 revisions left to test after this (roughly 11 steps)
> [44d21c3f3a2ef2f58b18bda64c52c99e723f3f4a] Merge
> git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
>
> ----
>
> git bisect bad
>
> Output:
>
> Bisecting: 712 revisions left to test after this (roughly 10 steps)
> [e75c73ad64478c12b3a44b86a3e7f62a4f65b93e] Merge branch
> 'x86-fpu-for-linus' of
> git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
>
> ----
>
> git bisect good
>
> Output:
>
> Bisecting: 343 revisions left to test after this (roughly 9 steps)
> [43224b96af3154cedd7220f7b90094905f07ac78] Merge branch
> 'timers-core-for-linus' of
> git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
>
> ----
>
> git bisect good
>
> Output:
>
> Bisecting: 171 revisions left to test after this (roughly 8 steps)
> [056c04ba8bbad4c563c05306cc8a8c66e713f280] crypto: seqiv - Fix module
> unload/reload crash
>
> ----
>
> git bisect good
>
> Output:
>
> Bisecting: 85 revisions left to test after this (roughly 7 steps)
> [edf18b9108f5025f9e83b2c167c9122954acbc62] crypto: api - Add
> CRYPTO_MINALIGN_ATTR to struct crypto_alg
>
> ----
>
> git bisect good
>
> Output:
>
> Bisecting: 41 revisions left to test after this (roughly 6 steps)
> [407a2c720556e8e340e06f6a7174f5d6d80cf9ea] Merge branch
> 'irq-core-for-linus' of
> git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
>
> ----
>
> It didn't boot with the following error messages:
>
> Oops: Kernel access of bad area, sig: 11 [#1]
>
> .sb600_8259_cascade+0x4c/0xac (unreliable)
> .kmem_cache_alloc+0x5c/0x1c4 (unreliable)
>
> ----
>
> git bisect bad
>
> Output:
>
> Bisecting: 21 revisions left to test after this (roughly 5 steps)
> [3b0f95be143bea1aa47beb20134ef82e4e4068dc] irq: Add
> irq_set_chained_handler_and_data()
>
> ----
>
> git bisect good
>
> Output:
>
> Bisecting: 12 revisions left to test after this (roughly 4 steps)
> [62a993df31f795d87bcb4c6cb005d36f32f6ad55] irqchip: atmel-aic5: Add
> sama5d2 support
>
> ----
>
> git bisect good
>
> Output:
>
> Bisecting: 6 revisions left to test after this (roughly 3 steps)
> [a614a610ac9b28f195d790d25be72d26f345c53a] genirq: Remove bogus
> restriction in irq_move_mask_irq()
>
> ----
>
> It didn't boot with the following error messages:
>
> Oops: Kernel access of bad area, sig: 11 [#1]
>
> .sb600_8259_cascade+0x4c/0xac (unreliable)
> .__kernfs_new_node+0x54/0xd8 (unreliable)
>
> ----
>
> git bisect bad
>
> Output:
>
> Bisecting: 2 revisions left to test after this (roughly 2 steps)
> [0d0b4c866bcce647f40d73efe5e90aeeb079050a] genirq: Introduce struct
> irq_common_data to host shared irq data
>
> ----
>
> It didn't boot with the following error messages:
>
> Oops: Kernel access of bad area, sig: 11 [#1]
>
> .sb600_8259_cascade+0x4c/0xac (unreliable)
> .schedule+0x74/0x9c (unreliable)
>
> ----
>
> git bisect bad
>
> Output:
>
> Bisecting: 0 revisions left to test after this (roughly 1 step)
> [77ed42f18edd486e9994ccd1f174076309a6343f] genirq: Prevent crash in
> irq_move_irq()
>
> ----
>
> git bisect good
>
> Output:
> 0d0b4c866bcce647f40d73efe5e90aeeb079050a is the first bad commit
> commit 0d0b4c866bcce647f40d73efe5e90aeeb079050a
> Author: Jiang Liu <jiang.liu@linux.intel.com>
> Date: Mon Jun 1 16:05:12 2015 +0800
>
> genirq: Introduce struct irq_common_data to host shared irq data
>
> With the introduction of hierarchy irqdomain, struct irq_data becomes
> per-chip instead of per-irq and there may be multiple irq_datas
> associated with the same irq. Some per-irq data stored in struct
> irq_data now may get duplicated into multiple irq_datas, and causes
> inconsistent view.
>
> So introduce struct irq_common_data to host per-irq common data
> and to
> achieve consistent view among irq_chips.
>
> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
> Cc: Tony Luck <tony.luck@intel.com>
> Cc: Bjorn Helgaas <bhelgaas@google.com>
> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> Cc: Randy Dunlap <rdunlap@infradead.org>
> Cc: Yinghai Lu <yinghai@kernel.org>
> Cc: Borislav Petkov <bp@alien8.de>
> Cc: Jason Cooper <jason@lakedaemon.net>
> Cc: Kevin Cernekee <cernekee@gmail.com>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Marc Zyngier <marc.zyngier@arm.com>
> Link:
> http://lkml.kernel.org/r/1433145945-789-4-git-send-email-jiang.liu@linux.intel.com
> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
>
> :040000 040000 4cb60e0b1d4beb046834e75c66b5d0a0613935b9
> df0b465b70ec087560482267cca2d9ff54d92c49 M include
> :040000 040000 3808922cd797449f8f9b33300064a2ff1727f3a6
> 25a75bf65be0ba9e397151de0ed1beb1695fddb2 M kernel
>
> ----
>
> Rgds,
>
> Christian
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev
next prev parent reply other threads:[~2015-07-10 6:57 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-14 4:27 [PATCH 00/10] Move MSI related PCI controller ops to pci_controller_ops Daniel Axtens
2015-04-14 4:27 ` [PATCH 01/10] powerpc: Add MSI operations to pci_controller_ops struct Daniel Axtens
2015-04-14 4:27 ` [PATCH 02/10] powerpc/powernv: Move MSI-related ops to pci_controller_ops Daniel Axtens
2015-04-14 4:27 ` [PATCH 03/10] powerpc/cell: " Daniel Axtens
2015-04-14 4:27 ` [PATCH 04/10] powerpc/pseries: " Daniel Axtens
2015-04-14 4:27 ` [PATCH 05/10] powerpc/fsl_msi: " Daniel Axtens
2015-04-14 4:27 ` [PATCH 06/10] powerpc/ppc4xx_msi: " Daniel Axtens
2015-04-14 4:28 ` [PATCH 07/10] powerpc/ppc4xx_hsta_msi: " Daniel Axtens
2015-04-14 4:28 ` [PATCH 08/10] powerpc/mpic_pasemi_msi: " Daniel Axtens
2015-07-07 10:50 ` PASEMI: PA6T board doesn't boot with the RC1 of kernel 4.2 anymore Christian Zigotzky
2015-07-07 11:25 ` Christian Zigotzky
2015-07-07 12:44 ` Christian Zigotzky
2015-07-08 18:00 ` Christian Zigotzky
2015-07-08 22:36 ` Benjamin Herrenschmidt
2015-07-09 1:42 ` Michael Ellerman
2015-07-09 5:19 ` Christian Zigotzky
2015-07-09 7:07 ` Michael Ellerman
2015-07-09 7:53 ` Benjamin Herrenschmidt
2015-07-09 8:50 ` Christian Zigotzky
2015-07-09 9:12 ` Christian Zigotzky
2015-07-09 9:52 ` Denis Kirjanov
2015-07-09 10:37 ` Christian Zigotzky
2015-07-13 6:47 ` Benjamin Herrenschmidt
2015-07-13 9:33 ` Denis Kirjanov
2015-07-09 22:27 ` Christian Zigotzky
2015-07-10 6:51 ` Christian Zigotzky [this message]
2015-07-13 6:44 ` Benjamin Herrenschmidt
2015-04-14 4:28 ` [PATCH 09/10] powerpc/mpic_u3msi: Move MSI-related ops to pci_controller_ops Daniel Axtens
2015-04-14 4:28 ` [PATCH 10/10] powerpc: Remove MSI-related PCI controller ops from ppc_md Daniel Axtens
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=559F6B6D.2000002@xenosoft.de \
--to=chzigotzky@xenosoft.de \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.