From: Peter Hurley <peter@hurleysoftware.com>
To: Patrick Donnelly <batrick@batbytes.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.cz>, open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v3] tty: add missing rcu_read_lock for task_pgrp
Date: Sat, 11 Jul 2015 22:05:45 -0400 [thread overview]
Message-ID: <55A1CB79.8040300@hurleysoftware.com> (raw)
In-Reply-To: <1435622379-3170-1-git-send-email-batrick@batbytes.com>
On 06/29/2015 07:59 PM, Patrick Donnelly wrote:
> task_pgrp requires an rcu or tasklist lock to be obtained if the returned pid
> is to be dereferenced, which kill_pgrp does. Obtain an RCU lock for the
> duration of use.
>
> Signed-off-by: Patrick Donnelly <batrick@batbytes.com>
> ---
> drivers/tty/n_tty.c | 12 ++++++++++--
> drivers/tty/tty_io.c | 17 ++++++++++++-----
> 2 files changed, 22 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
> index c9c27f6..0d631f8 100644
> --- a/drivers/tty/n_tty.c
> +++ b/drivers/tty/n_tty.c
> @@ -2137,6 +2137,8 @@ extern ssize_t redirected_tty_write(struct file *, const char __user *,
>
> static int job_control(struct tty_struct *tty, struct file *file)
> {
> + struct pid *pgrp;
> +
> /* Job control check -- must be done at start and after
> every sleep (POSIX.1 7.1.1.4). */
> /* NOTE: not yet done after every sleep pending a thorough
> @@ -2146,18 +2148,24 @@ static int job_control(struct tty_struct *tty, struct file *file)
> current->signal->tty != tty)
> return 0;
>
> + rcu_read_lock();
> + pgrp = task_pgrp(current);
> +
> spin_lock_irq(&tty->ctrl_lock);
> +
> if (!tty->pgrp)
> printk(KERN_ERR "n_tty_read: no tty->pgrp!\n");
> - else if (task_pgrp(current) != tty->pgrp) {
> + else if (pgrp != tty->pgrp) {
> spin_unlock_irq(&tty->ctrl_lock);
> if (is_ignored(SIGTTIN) || is_current_pgrp_orphaned())
> return -EIO;
I just realized there's a missing rcu_read_unlock() from this early return.
Regards,
Peter Hurley
> - kill_pgrp(task_pgrp(current), SIGTTIN, 1);
> + kill_pgrp(pgrp, SIGTTIN, 1);
> + rcu_read_unlock();
> set_thread_flag(TIF_SIGPENDING);
> return -ERESTARTSYS;
> }
> spin_unlock_irq(&tty->ctrl_lock);
> + rcu_read_unlock();
> return 0;
> }
>
> diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
> index 57fc6ee..6bdfb98 100644
> --- a/drivers/tty/tty_io.c
> +++ b/drivers/tty/tty_io.c
> @@ -388,33 +388,40 @@ EXPORT_SYMBOL_GPL(tty_find_polling_driver);
> int tty_check_change(struct tty_struct *tty)
> {
> unsigned long flags;
> + struct pid *pgrp;
> int ret = 0;
>
> if (current->signal->tty != tty)
> return 0;
>
> + rcu_read_lock();
> + pgrp = task_pgrp(current);
> +
> spin_lock_irqsave(&tty->ctrl_lock, flags);
>
> if (!tty->pgrp) {
> printk(KERN_WARNING "tty_check_change: tty->pgrp == NULL!\n");
> goto out_unlock;
> }
> - if (task_pgrp(current) == tty->pgrp)
> + if (pgrp == tty->pgrp)
> goto out_unlock;
> spin_unlock_irqrestore(&tty->ctrl_lock, flags);
> +
> if (is_ignored(SIGTTOU))
> - goto out;
> + goto out_rcuunlock;
> if (is_current_pgrp_orphaned()) {
> ret = -EIO;
> - goto out;
> + goto out_rcuunlock;
> }
> - kill_pgrp(task_pgrp(current), SIGTTOU, 1);
> + kill_pgrp(pgrp, SIGTTOU, 1);
> + rcu_read_unlock();
> set_thread_flag(TIF_SIGPENDING);
> ret = -ERESTARTSYS;
> -out:
> return ret;
> out_unlock:
> spin_unlock_irqrestore(&tty->ctrl_lock, flags);
> +out_rcuunlock:
> + rcu_read_unlock();
> return ret;
> }
>
>
next prev parent reply other threads:[~2015-07-12 2:05 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-27 21:17 [PATCH 1/2] Add missing rcu_read_lock for task_pgrp Patrick Donnelly
2015-06-27 21:17 ` [PATCH 2/2] Check tcsetpgrp p is a process group Patrick Donnelly
2015-06-27 23:26 ` Greg Kroah-Hartman
2015-06-28 0:53 ` Patrick Donnelly
2015-06-27 23:27 ` Greg Kroah-Hartman
2015-06-27 23:25 ` [PATCH 1/2] Add missing rcu_read_lock for task_pgrp Greg Kroah-Hartman
2015-06-28 0:51 ` [PATCH v2 1/2] tty: add " Patrick Donnelly
2015-06-28 0:51 ` [PATCH v2 2/2] tty: check tcsetpgrp p is a process group Patrick Donnelly
2015-06-28 16:07 ` Peter Hurley
2015-06-29 1:27 ` Patrick Donnelly
2015-06-28 15:23 ` [PATCH v2 1/2] tty: add missing rcu_read_lock for task_pgrp Peter Hurley
2015-06-28 17:20 ` Patrick Donnelly
2015-06-28 19:21 ` Peter Hurley
2015-06-28 19:27 ` Peter Hurley
2015-06-29 23:38 ` Patrick Donnelly
2015-06-29 23:59 ` [PATCH v3] " Patrick Donnelly
2015-07-09 2:07 ` Peter Hurley
2015-07-12 2:05 ` Peter Hurley [this message]
2015-07-12 22:42 ` Patrick Donnelly
2015-07-12 22:51 ` [PATCH v4] " Patrick Donnelly
2015-07-13 0:35 ` Peter Hurley
2015-07-20 9:26 ` Jiri Slaby
2015-07-20 19:40 ` Oleg Nesterov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55A1CB79.8040300@hurleysoftware.com \
--to=peter@hurleysoftware.com \
--cc=batrick@batbytes.com \
--cc=gregkh@linuxfoundation.org \
--cc=jslaby@suse.cz \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.