From: Peter Saisanas <psaisanas-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Subject: Nouveau driver cannot extract DCB Block from OF DEV TREE
Date: Mon, 13 Jul 2015 07:48:25 +1000 [thread overview]
Message-ID: <55A2E0A9.1070000@gmail.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 907 bytes --]
Hi,
As mentioned recently in the nouveau IRC room recently,
When running a Powermac 11.2, (G5 Quad) with a Quadro FX4500 (NV47),
previous kernels had no issue extracting the DCB block / GPU BIOS from
the OpenFirmware device tree via the FCODE ROM.
Last vanilla kernel that i have compiled seemed to work fine (vanilla
3.18.16).
However, when compiling a newer vanilla kernel, (vanilla 4.1.2), nouveau
seems to have an issue reading the DCB block / GPU BIOS from the
OpenFirmware device tree.
As instructed, i have attached a dmesg.log along with a dump of the
NVDA,BMP fimage out of the following folder:
/sys/firmware/devicetree/base/pci@0,f0000000/NVDA,Parent@0/
Also, i have passed the following nouveau module options as instructed:
options nouveau config="NvMSI=0,debug=debug,VBIOS=trace"
Please let me know if there is any more info required.
Thanks for your help!
Best Regards,
Peter
[-- Attachment #2: dmesg.log --]
[-- Type: text/x-log, Size: 41856 bytes --]
[ 0.000000] Allocated 4096 bytes for 4 pacas at c00000000ffff000
[ 0.000000] DART table allocated at: c00000007f000000
[ 0.000000] Using PowerMac machine description
[ 0.000000] Page orders: linear mapping = 24, virtual = 12, io = 12
[ 0.000000] Found initrd at 0xc000000001500000:0xc000000001c57000
[ 0.000000] Found U4 memory controller & host bridge @ 0xf8000000 revision: 0x42
[ 0.000000] Mapped at 0xd000080080000000
[ 0.000000] Found a Shasta mac-io controller, rev: 0, mapped at 0xd000080080041000
[ 0.000000] PowerMac motherboard: PowerMac G5 Dual Core
[ 0.000000] DART IOMMU initialized for U4 type chipset
[ 0.000000] bootconsole [udbg0] enabled
[ 0.000000] CPU maps initialized for 1 thread per core
[ 0.000000] (thread shift is 0)
[ 0.000000] Starting Linux PPC64 #1 SMP Sun Jul 12 11:01:34 AEST 2015
[ 0.000000] -----------------------------------------------------
[ 0.000000] ppc64_pft_size = 0x0
[ 0.000000] phys_mem_size = 0x400000000
[ 0.000000] cpu_features = 0x0804806318100448
[ 0.000000] possible = 0x1fffffef18500649
[ 0.000000] always = 0x0000000018100040
[ 0.000000] cpu_user_features = 0xdc080000 0x00000000
[ 0.000000] mmu_features = 0x0c000001
[ 0.000000] firmware_features = 0x0000000000000000
[ 0.000000] htab_address = 0xc000000470000000
[ 0.000000] htab_hash_mask = 0x1fffff
[ 0.000000] -----------------------------------------------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.1.2-powerpc64 (root@powermac-g5-quad) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Sun Jul 12 11:01:34 AEST 2015
[ 0.000000] Found U4-PCIE PCI host bridge. Firmware bus number: 0->255
[ 0.000000] PCI host bridge /pci@0,f0000000 ranges:
[ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000
[ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
[ 0.000000] MEM 0x0000000090000000..0x00000000bfffffff -> 0x0000000090000000
[ 0.000000] Can't get bus-range for /ht@0,f2000000, assume bus 0
[ 0.000000] Found U3-HT PCI host bridge. Firmware bus number: 0->239
[ 0.000000] PCI host bridge /ht@0,f2000000 (primary) ranges:
[ 0.000000] SMU: Driver 0.7 (c) 2005 Benjamin Herrenschmidt, IBM Corp.
[ 0.000000] nvram: Checking bank 0...
[ 0.000000] nvram: gen0=1710, gen1=1711
[ 0.000000] nvram: Active bank is: 1
[ 0.000000] nvram: OF partition at 0x410
[ 0.000000] nvram: XP partition at 0x1020
[ 0.000000] nvram: NR partition at 0x1120
[ 0.000000] Top of RAM: 0x480000000, Total RAM: 0x400000000
[ 0.000000] Memory hole size: 2048MB
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000047fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000047fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000047fffffff]
[ 0.000000] On node 0 totalpages: 4194304
[ 0.000000] free_area_init_node: node 0, pgdat c000000000715200, node_mem_map c0000004603baf80
[ 0.000000] DMA zone: 64512 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4194304 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 21 pages/cpu @c000000460200000 s46360 r0 d39656 u262144
[ 0.000000] pcpu-alloc: s46360 r0 d39656 u262144 alloc=1*1048576
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4129792
[ 0.000000] Kernel command line: root=UUID=3e9f281b-e012-4b4f-8c36-6fe559e02786 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Sorting __ex_table...
[ 0.000000] Memory: 16199008K/16777216K available (5428K kernel code, 936K rwdata, 1260K rodata, 316K init, 478K bss, 578208K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:512 nr_irqs:512 16
[ 0.000000] mpic: Resetting
[ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at f8040000, max 4 CPUs
[ 0.000000] mpic: ISU size: 124, shift: 7, mask: 7f
[ 0.000000] mpic: Initializing for 124 sources
[ 0.000000] mpic: Setting up HT PICs workarounds for U3/U4
[ 0.000000] mpic: - HT:01.0 disabled MSI mapping found @ 0xfee00000
[ 0.000000] mpic: - HT:02.0 disabled MSI mapping found @ 0xfee00000
[ 0.000000] mpic: - HT:03.0 disabled MSI mapping found @ 0xfee00000
[ 0.000000] mpic: - HT:04.0 disabled MSI mapping found @ 0xfee00000
[ 0.000000] mpic: - HT:05.0 disabled MSI mapping found @ 0xfee00000
[ 0.000000] mpic: - HT:06.0 disabled MSI mapping found @ 0xfee00000
[ 0.000000] mpic: - HT:07.0 [0x90] vendor 106b device 0053 has 86 irqs
[ 0.000000] time_init: decrementer frequency = 33.333333 MHz
[ 0.000000] time_init: processor frequency = 2500.000000 MHz
[ 0.000002] clocksource timebase: mask: 0xffffffffffffffff max_cycles: 0x7b00c4bad, max_idle_ns: 440795202744 ns
[ 0.000006] clocksource: timebase mult[1e000005] shift[24] registered
[ 0.000009] clockevent: decrementer mult[8888887] shift[32] cpu[0]
[ 0.000059] Console: colour dummy device 80x25
[ 0.000063] console [tty0] enabled
[ 0.000068] bootconsole [udbg0] disabled
[ 0.000074] pid_max: default: 32768 minimum: 301
[ 0.000105] Security Framework initialized
[ 0.000113] AppArmor: AppArmor disabled by boot time parameter
[ 0.000128] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.000133] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.000686] Initializing cgroup subsys blkio
[ 0.000696] Initializing cgroup subsys devices
[ 0.000702] Initializing cgroup subsys freezer
[ 0.000708] Initializing cgroup subsys net_cls
[ 0.000714] Initializing cgroup subsys perf_event
[ 0.000858] PowerMac SMP probe found 4 cpus
[ 0.000945] KeyWest i2c @0xf8001003 irq 16 /u4@0,f8000000/i2c@f8001000
[ 0.000950] channel 1 bus /u4@0,f8000000/i2c@f8001000/i2c-bus@1
[ 0.000991] KeyWest i2c @0x80018000 irq 27 /ht@0,f2000000/pci@8/mac-io@7/i2c@18000
[ 0.000996] channel 0 bus /ht@0,f2000000/pci@8/mac-io@7/i2c@18000/i2c-bus@0
[ 0.001000] channel 0 bus /ht@0,f2000000/pci@8/mac-io@7/i2c@18000/i2c-bus@0
[ 0.001061] SMU i2c /smu@0,0/smu-i2c-control@0
[ 0.001065] channel b bus /smu@0,0/smu-i2c-control@0/i2c-bus@b
[ 0.001069] channel e bus /smu@0,0/smu-i2c-control@0/i2c-bus@e
[ 0.001083] Processor timebase sync using platform function
[ 0.001087] mpic: requesting IPIs...
[ 0.001120] PPC970/FX/MP performance monitor hardware support registered
[ 0.005024] Brought up 4 CPUs
[ 0.005378] devtmpfs: initialized
[ 0.007371] device-tree: Duplicate name in i2c@18000, renamed to "i2c-bus@0#1"
[ 0.009254] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.009694] NET: Registered protocol family 16
[ 0.013998] cpuidle: using governor ladder
[ 0.020011] cpuidle: using governor menu
[ 0.020413] PCI: Probing PCI hardware
[ 0.020503] PCI host bridge to bus 0000:00
[ 0.020512] pci_bus 0000:00: root bus resource [io 0x10000-0x80ffff] (bus address [0x0000-0x7fffff])
[ 0.020522] pci_bus 0000:00: root bus resource [mem 0xf1000000-0xf1ffffff]
[ 0.020530] pci_bus 0000:00: root bus resource [mem 0x90000000-0xbfffffff]
[ 0.020537] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.020547] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.020578] pci 0000:00:0b.0: [106b:005b] type 01 class 0x060400
[ 0.020609] PCI: Fixup U4 PCIe bridge range: [mem 0x90000000-0xbfffffff]
[ 0.020642] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
[ 0.053546] IOMMU table initialized, virtual merging enabled
[ 0.053616] pci 0000:0a:00.0: [10de:009d] type 00 class 0x030000
[ 0.053632] pci 0000:0a:00.0: reg 0x10: [mem 0x92000000-0x92ffffff]
[ 0.053645] pci 0000:0a:00.0: reg 0x14: [mem 0xa0000000-0xbfffffff 64bit pref]
[ 0.053658] pci 0000:0a:00.0: reg 0x1c: [mem 0x91000000-0x91ffffff 64bit]
[ 0.053667] pci 0000:0a:00.0: reg 0x24: [io 0x10000-0x1007f]
[ 0.053676] pci 0000:0a:00.0: reg 0x30: [mem 0x90000000-0x9001ffff pref]
[ 0.053766] pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.053782] pci 0000:00:0b.0: PCI bridge to [bus 0a]
[ 0.053793] pci 0000:00:0b.0: bridge window [io 0x10000-0x1ffff]
[ 0.053797] pci 0000:00:0b.0: bridge window [mem 0x90000000-0xbfffffff]
[ 0.053804] pci 0000:00:0b.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 0.053832] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 0a
[ 0.053894] PCI host bridge to bus 0001:00
[ 0.053901] pci_bus 0001:00: root bus resource [io 0x811000-0xc10fff] (bus address [0x0000-0x3fffff])
[ 0.053912] pci_bus 0001:00: root bus resource [mem 0xfa000000-0xffffffff]
[ 0.053919] pci_bus 0001:00: root bus resource [mem 0x80000000-0x8fffffff]
[ 0.053926] pci_bus 0001:00: root bus resource [mem 0xc0000000-0xefffffff]
[ 0.053933] pci_bus 0001:00: root bus resource [bus 00-ef]
[ 0.053941] pci_bus 0001:00: busn_res: [bus 00-ef] end is updated to ff
[ 0.053956] pci 0001:00:00.0: [106b:0074] type 00 class 0x060000
[ 0.054025] pci 0001:00:01.0: [1166:0130] type 01 class 0x060400
[ 0.054112] pci 0001:00:02.0: [1166:0130] type 01 class 0x060400
[ 0.054201] pci 0001:00:03.0: [1166:0132] type 01 class 0x060400
[ 0.054283] pci 0001:00:04.0: [1166:0132] type 01 class 0x060400
[ 0.054363] pci 0001:00:05.0: [1166:0132] type 01 class 0x060400
[ 0.054448] pci 0001:00:06.0: [1166:0132] type 01 class 0x060400
[ 0.054531] pci 0001:00:07.0: [106b:0053] type 01 class 0x060400
[ 0.054628] pci 0001:00:08.0: [106b:0054] type 01 class 0x060400
[ 0.054719] pci 0001:00:09.0: [106b:0055] type 01 class 0x060400
[ 0.054879] pci 0001:00:01.0: PCI bridge to [bus 04]
[ 0.054941] pci 0001:05:04.0: [14e4:166a] type 00 class 0x020000
[ 0.054955] pci 0001:05:04.0: reg 0x10: [mem 0xfa530000-0xfa53ffff 64bit]
[ 0.054964] pci 0001:05:04.0: reg 0x18: [mem 0xfa520000-0xfa52ffff 64bit]
[ 0.055003] pci 0001:05:04.0: PME# supported from D3hot D3cold
[ 0.055061] pci 0001:05:04.1: [14e4:166a] type 00 class 0x020000
[ 0.055076] pci 0001:05:04.1: reg 0x10: [mem 0xfa510000-0xfa51ffff 64bit]
[ 0.055085] pci 0001:05:04.1: reg 0x18: [mem 0xfa500000-0xfa50ffff 64bit]
[ 0.055123] pci 0001:05:04.1: PME# supported from D3hot D3cold
[ 0.055188] pci 0001:00:02.0: PCI bridge to [bus 05]
[ 0.055199] pci 0001:00:02.0: bridge window [mem 0xfa500000-0xfa5fffff]
[ 0.055258] pci 0001:00:03.0: PCI bridge to [bus 06]
[ 0.055309] pci 0001:00:04.0: PCI bridge to [bus 07]
[ 0.055359] pci 0001:00:05.0: PCI bridge to [bus 08]
[ 0.055408] pci 0001:00:06.0: PCI bridge to [bus 09]
[ 0.055472] pci 0001:00:07.0: PCI bridge to [bus 02]
[ 0.055484] pci 0001:00:07.0: bridge window [mem 0xfa000000-0xfa3fffff]
[ 0.055489] pci 0001:00:07.0: bridge window [mem 0x00000000-0x000fffff pref]
[ 0.055539] pci 0001:01:01.0: [14e4:4318] type 00 class 0x028000
[ 0.055550] pci 0001:01:01.0: reg 0x10: [mem 0x80084000-0x80085fff]
[ 0.055640] pci 0001:01:07.0: [106b:004f] type 00 class 0xff0000
[ 0.055650] pci 0001:01:07.0: reg 0x10: [mem 0x80000000-0x8007ffff]
[ 0.055744] pci 0001:01:0b.0: [1033:0035] type 00 class 0x0c0310
[ 0.055758] pci 0001:01:0b.0: reg 0x10: [mem 0x80082000-0x80082fff]
[ 0.055807] pci 0001:01:0b.0: supports D1 D2
[ 0.055810] pci 0001:01:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.055868] pci 0001:01:0b.1: [1033:0035] type 00 class 0x0c0310
[ 0.055882] pci 0001:01:0b.1: reg 0x10: [mem 0x80081000-0x80081fff]
[ 0.055931] pci 0001:01:0b.1: supports D1 D2
[ 0.055934] pci 0001:01:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.055993] pci 0001:01:0b.2: [1033:00e0] type 00 class 0x0c0320
[ 0.056006] pci 0001:01:0b.2: reg 0x10: [mem 0x80080000-0x800800ff]
[ 0.056056] pci 0001:01:0b.2: supports D1 D2
[ 0.056059] pci 0001:01:0b.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.056117] pci 0001:00:08.0: PCI bridge to [bus 01]
[ 0.056129] pci 0001:00:08.0: bridge window [mem 0x80000000-0x800fffff]
[ 0.056134] pci 0001:00:08.0: bridge window [mem 0x00000000-0x000fffff pref]
[ 0.056224] pci 0001:03:0c.0: [1166:0240] type 00 class 0x01018f
[ 0.056234] pci 0001:03:0c.0: reg 0x10: [io 0x811000-0x811007]
[ 0.056242] pci 0001:03:0c.0: reg 0x14: [io 0x811000-0x811003]
[ 0.056249] pci 0001:03:0c.0: reg 0x18: [io 0x811000-0x811007]
[ 0.056257] pci 0001:03:0c.0: reg 0x1c: [io 0x811000-0x811003]
[ 0.056264] pci 0001:03:0c.0: reg 0x20: [io 0x811000-0x81100f]
[ 0.056272] pci 0001:03:0c.0: reg 0x24: [mem 0xfa402000-0xfa403fff]
[ 0.056343] pci 0001:03:0d.0: [106b:0050] type 00 class 0xff0000
[ 0.056353] pci 0001:03:0d.0: reg 0x10: [mem 0xfa404000-0xfa407fff]
[ 0.056437] pci 0001:03:0e.0: [106b:0052] type 00 class 0x0c0010
[ 0.056449] pci 0001:03:0e.0: reg 0x10: [mem 0xfa400000-0xfa400fff]
[ 0.056494] pci 0001:03:0e.0: supports D1 D2
[ 0.056497] pci 0001:03:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.056551] pci 0001:00:09.0: PCI bridge to [bus 03]
[ 0.056563] pci 0001:00:09.0: bridge window [mem 0xfa400000-0xfa4fffff]
[ 0.056568] pci 0001:00:09.0: bridge window [mem 0x00000000-0x000fffff pref]
[ 0.056619] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 09
[ 0.056711] PCI 0000:00 Cannot reserve Legacy IO [io 0x10000-0x10fff]
[ 0.056726] pci 0000:00:0b.0: BAR 9: assigned [mem 0xf1000000-0xf10fffff 64bit pref]
[ 0.056737] pci 0000:0a:00.0: BAR 5: assigned [io 0x10000-0x1007f]
[ 0.056747] pci 0000:00:0b.0: PCI bridge to [bus 0a]
[ 0.056754] pci 0000:00:0b.0: bridge window [io 0x10000-0x1ffff]
[ 0.056764] pci 0000:00:0b.0: bridge window [mem 0x90000000-0xbfffffff]
[ 0.056772] pci 0000:00:0b.0: bridge window [mem 0xf1000000-0xf10fffff 64bit pref]
[ 0.056786] pci_bus 0000:00: resource 4 [io 0x10000-0x80ffff]
[ 0.056789] pci_bus 0000:00: resource 5 [mem 0xf1000000-0xf1ffffff]
[ 0.056792] pci_bus 0000:00: resource 6 [mem 0x90000000-0xbfffffff]
[ 0.056795] pci_bus 0000:0a: resource 0 [io 0x10000-0x1ffff]
[ 0.056798] pci_bus 0000:0a: resource 1 [mem 0x90000000-0xbfffffff]
[ 0.056801] pci_bus 0000:0a: resource 2 [mem 0xf1000000-0xf10fffff 64bit pref]
[ 0.056838] pci 0001:00:01.0: PCI bridge to [bus 04]
[ 0.056848] pci 0001:00:02.0: PCI bridge to [bus 05]
[ 0.056855] pci 0001:00:02.0: bridge window [mem 0xfa500000-0xfa5fffff]
[ 0.056864] pci 0001:00:03.0: PCI bridge to [bus 06]
[ 0.056874] pci 0001:00:04.0: PCI bridge to [bus 07]
[ 0.056883] pci 0001:00:05.0: PCI bridge to [bus 08]
[ 0.056892] pci 0001:00:06.0: PCI bridge to [bus 09]
[ 0.056901] pci 0001:00:07.0: PCI bridge to [bus 02]
[ 0.056909] pci 0001:00:07.0: bridge window [mem 0xfa000000-0xfa3fffff]
[ 0.056918] pci 0001:00:08.0: PCI bridge to [bus 01]
[ 0.056926] pci 0001:00:08.0: bridge window [mem 0x80000000-0x800fffff]
[ 0.056935] pci 0001:00:09.0: PCI bridge to [bus 03]
[ 0.056943] pci 0001:00:09.0: bridge window [mem 0xfa400000-0xfa4fffff]
[ 0.056953] pci_bus 0001:00: resource 4 [io 0x811000-0xc10fff]
[ 0.056956] pci_bus 0001:00: resource 5 [mem 0xfa000000-0xffffffff]
[ 0.056959] pci_bus 0001:00: resource 6 [mem 0x80000000-0x8fffffff]
[ 0.056961] pci_bus 0001:00: resource 7 [mem 0xc0000000-0xefffffff]
[ 0.056964] pci_bus 0001:05: resource 1 [mem 0xfa500000-0xfa5fffff]
[ 0.056968] pci_bus 0001:02: resource 1 [mem 0xfa000000-0xfa3fffff]
[ 0.056971] pci_bus 0001:01: resource 1 [mem 0x80000000-0x800fffff]
[ 0.056974] pci_bus 0001:03: resource 1 [mem 0xfa400000-0xfa4fffff]
[ 0.056976] PCI: Probing PCI hardware done
[ 0.061988] vgaarb: device added: PCI:0000:0a:00.0,decodes=io+mem,owns=none,locks=none
[ 0.062026] vgaarb: loaded
[ 0.062031] vgaarb: bridge control possible 0000:0a:00.0
[ 0.062153] SCSI subsystem initialized
[ 0.062186] pps_core: LinuxPPS API ver. 1 registered
[ 0.062192] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti-k2GhghHVRtY@public.gmane.org>
[ 0.062473] Switched to clocksource timebase
[ 0.064385] b43-pci-bridge 0001:01:01.0: enabling device (0004 -> 0006)
[ 0.071497] ssb: Found chip with id 0x4318, rev 0x02 and package 0x02
[ 0.071508] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243)
[ 0.071514] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243)
[ 0.071520] ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243)
[ 0.071525] ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243)
[ 0.090531] ssb: Sonics Silicon Backplane found on PCI device 0001:01:01.0
[ 0.090593] NET: Registered protocol family 2
[ 0.090868] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.091432] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.092653] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.092720] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.092864] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.093110] NET: Registered protocol family 1
[ 0.093151] PCI: CLS mismatch (32 != 64), using 128 bytes
[ 0.093167] pci 0001:00:03.0: Found enabled HT MSI Mapping
[ 0.093180] pci 0001:00:04.0: Found enabled HT MSI Mapping
[ 0.093191] pci 0001:00:05.0: Found enabled HT MSI Mapping
[ 0.093203] pci 0001:00:06.0: Found enabled HT MSI Mapping
[ 0.093231] pci 0001:01:0b.0: enabling device (0000 -> 0002)
[ 0.143508] pci 0001:01:0b.1: enabling device (0000 -> 0002)
[ 0.194487] pci 0001:01:0b.2: enabling device (0004 -> 0006)
[ 0.194596] Unpacking initramfs...
[ 0.381233] Freeing initrd memory: 7516K (c000000001500000 - c000000001c57000)
[ 0.381687] futex hash table entries: 1024 (order: 5, 131072 bytes)
[ 0.381738] Initialise system trusted keyring
[ 0.381772] audit: initializing netlink subsys (disabled)
[ 0.381804] audit: type=2000 audit(1436735021.379:1): initialized
[ 0.382113] HugeTLB registered 16 MB page size, pre-allocated 0 pages
[ 0.385340] VFS: Disk quotas dquot_6.6.0
[ 0.385409] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.386088] alg: No test for stdrng (krng)
[ 0.386120] bounce: pool size: 64 pages
[ 0.386187] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.386199] io scheduler noop registered
[ 0.386206] io scheduler deadline registered
[ 0.386267] io scheduler cfq registered (default)
[ 0.386560] Using unsupported 1920x1200 NVDA,Display-A at a0020000, depth=8, pitch=2048
[ 0.426429] Console: switching to colour frame buffer device 240x75
[ 0.466006] fb0: Open Firmware frame buffer device on /pci@0,f0000000/NVDA,Parent@0/NVDA,Display-A@0
[ 0.466503] MacIO PCI driver attached to Shasta chipset
[ 0.467200] mousedev: PS/2 mouse device common for all mice
[ 0.518499] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
[ 0.529482] Registering G5 CPU frequency driver
[ 0.529601] Frequency method: SCOM, Voltage method: GPIO
[ 0.529739] Low: 1250 Mhz, High: 2500 Mhz, Cur: 2500 MHz
[ 0.530216] NET: Registered protocol family 10
[ 0.530683] mip6: Mobile IPv6
[ 0.530766] NET: Registered protocol family 17
[ 0.530897] Key type dns_resolver registered
[ 0.531202] Loading compiled-in X.509 certificates
[ 0.531339] registered taskstats version 1
[ 0.581472] rtc-generic rtc-generic: setting system clock to 2015-07-12 21:03:42 UTC (1436735022)
[ 0.582108] Freeing unused kernel memory: 316K (c00000000068f000 - c0000000006de000)
[ 0.622443] systemd-udevd[71]: starting version 215
[ 0.624337] random: systemd-udevd urandom read with 7 bits of entropy available
[ 0.638246] PTP clock support registered
[ 0.644019] tg3.c:v3.137 (May 11, 2014)
[ 0.645817] libata version 3.00 loaded.
[ 0.646173] sata_svw 0001:03:0c.0: version 2.3
[ 0.646247] sata_svw 0001:03:0c.0: Using 32-bit DMA via iommu
[ 0.650922] scsi host0: sata_svw
[ 0.652914] usbcore: registered new interface driver usbfs
[ 0.653108] usbcore: registered new interface driver hub
[ 0.653298] usbcore: registered new device driver usb
[ 0.653700] scsi host1: sata_svw
[ 0.654295] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.654781] ehci-pci: EHCI PCI platform driver
[ 0.655013] ehci-pci 0001:01:0b.2: EHCI Host Controller
[ 0.655164] ehci-pci 0001:01:0b.2: new USB bus registered, assigned bus number 1
[ 0.655424] ehci-pci 0001:01:0b.2: irq 70, io mem 0x80080000
[ 0.655431] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.655692] tg3 0001:05:04.0: Using 32-bit DMA via iommu
[ 0.656145] tg3 0001:05:04.0 eth0: Tigon3 [partno(BCM95780) rev 8003] (PCIX:133MHz:64-bit) MAC address 00:14:51:68:67:70
[ 0.656330] scsi host2: sata_svw
[ 0.656571] tg3 0001:05:04.0 eth0: attached PHY is 5780 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 0.656830] tg3 0001:05:04.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 0.657044] tg3 0001:05:04.0 eth0: dma_rwctrl[76144000] dma_mask[40-bit]
[ 0.658388] scsi host3: sata_svw
[ 0.658578] ata1: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402000 irq 18
[ 0.658775] ata2: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402100 irq 18
[ 0.658970] ata3: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402200 irq 18
[ 0.659165] ata4: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402300 irq 18
[ 0.659425] pata-pci-macio 0001:03:0d.0: enabling device (0004 -> 0006)
[ 0.661514] ehci-pci 0001:01:0b.2: USB 2.0 started, EHCI 1.00
[ 0.661781] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.661960] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.662152] usb usb1: Product: EHCI Host Controller
[ 0.662280] usb usb1: Manufacturer: Linux 4.1.2-powerpc64 ehci_hcd
[ 0.662443] usb usb1: SerialNumber: 0001:01:0b.2
[ 0.665734] tg3 0001:05:04.1: Using 32-bit DMA via iommu
[ 0.666129] tg3 0001:05:04.1 eth1: Tigon3 [partno(BCM95780) rev 8003] (PCIX:133MHz:64-bit) MAC address 00:14:51:68:67:71
[ 0.666132] tg3 0001:05:04.1 eth1: attached PHY is 5780 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 0.666134] tg3 0001:05:04.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 0.666136] tg3 0001:05:04.1 eth1: dma_rwctrl[76144000] dma_mask[40-bit]
[ 0.676087] pata-pci-macio 0001:03:0d.0: Activating pata-macio chipset Shasta ATA-6, Apple bus ID 3
[ 0.676392] scsi host4: pata_macio
[ 0.676453] ata5: PATA max UDMA/133 irq 38
[ 0.677555] firewire_ohci 0001:03:0e.0: enabling device (0000 -> 0002)
[ 0.728546] firewire_ohci 0001:03:0e.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[ 0.760994] hub 1-0:1.0: USB hub found
[ 0.770126] hub 1-0:1.0: 5 ports detected
[ 0.779664] ohci-pci: OHCI PCI platform driver
[ 0.788755] ohci-pci 0001:01:0b.0: OHCI PCI host controller
[ 0.797847] ohci-pci 0001:01:0b.0: new USB bus registered, assigned bus number 2
[ 0.806883] ohci-pci 0001:01:0b.0: irq 70, io mem 0x80082000
[ 0.846939] ata5.00: ATAPI: HL-DT-ST DVD-RW GWA-4165B, C006, max UDMA/66
[ 0.884796] ata5.00: configured for UDMA/66
[ 0.886377] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.886380] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.886381] usb usb2: Product: OHCI PCI host controller
[ 0.886383] usb usb2: Manufacturer: Linux 4.1.2-powerpc64 ohci_hcd
[ 0.886385] usb usb2: SerialNumber: 0001:01:0b.0
[ 0.898598] hub 2-0:1.0: USB hub found
[ 0.898616] hub 2-0:1.0: 3 ports detected
[ 0.898772] ohci-pci 0001:01:0b.1: OHCI PCI host controller
[ 0.898778] ohci-pci 0001:01:0b.1: new USB bus registered, assigned bus number 3
[ 0.898803] ohci-pci 0001:01:0b.1: irq 70, io mem 0x80081000
[ 0.965517] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.975700] ata1.00: ATA-8: WDC WD3200AAKS-75L9A0, 02.03E02, max UDMA/133
[ 0.975702] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.977353] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.977355] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.977357] usb usb3: Product: OHCI PCI host controller
[ 0.977359] usb usb3: Manufacturer: Linux 4.1.2-powerpc64 ohci_hcd
[ 0.977360] usb usb3: SerialNumber: 0001:01:0b.1
[ 0.977534] hub 3-0:1.0: USB hub found
[ 0.977545] hub 3-0:1.0: 2 ports detected
[ 0.992738] ata1.00: configured for UDMA/133
[ 0.992912] scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAKS-7 3E02 PQ: 0 ANSI: 5
[ 1.229707] firewire_core 0001:03:0e.0: created device fw0: GUID 001451fffe357de8, S800
[ 1.245088] firewire_core 0001:03:0e.0: phy config: new root=ffc1, gap_count=5
[ 1.323557] ata2: SATA link down (SStatus 4 SControl 300)
[ 1.398511] usb 2-2: new full-speed USB device number 2 using ohci-pci
[ 1.603513] usb 2-2: New USB device found, idVendor=413c, idProduct=1003
[ 1.618804] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.634101] usb 2-2: Product: Dell USB Keyboard Hub
[ 1.649351] usb 2-2: Manufacturer: Dell
[ 1.672513] hub 2-2:1.0: USB hub found
[ 1.686509] hub 2-2:1.0: 3 ports detected
[ 1.970502] usb 2-3: new full-speed USB device number 3 using ohci-pci
[ 2.248502] usb 2-3: New USB device found, idVendor=05ac, idProduct=1000
[ 2.263824] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.280501] usb 2-2.1: new full-speed USB device number 4 using ohci-pci
[ 2.295460] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.343861] usbcore: registered new interface driver usbhid
[ 2.345503] ata3: failed to resume link (SControl 0)
[ 2.345535] ata3: SATA link down (SStatus 0 SControl 0)
[ 2.376290] usbhid: USB HID core driver
[ 2.385733] input: HID 05ac:1000 as /devices/pci0001:00/0001:00:08.0/0001:01:0b.0/usb2/2-3/2-3:1.0/0003:05AC:1000.0001/input/input0
[ 2.389483] usb 2-2.1: New USB device found, idVendor=413c, idProduct=2010
[ 2.389485] usb 2-2.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 2.389487] usb 2-2.1: Product: Dell USB Keyboard
[ 2.389489] usb 2-2.1: Manufacturer: Dell
[ 2.400034] input: Dell Dell USB Keyboard as /devices/pci0001:00/0001:00:08.0/0001:01:0b.0/usb2/2-2/2-2.1/2-2.1:1.0/0003:413C:2010.0003/input/input1
[ 2.450629] hid-generic 0003:413C:2010.0003: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0001:01:0b.0-2.1/input0
[ 2.475568] input: Dell Dell USB Keyboard as /devices/pci0001:00/0001:00:08.0/0001:01:0b.0/usb2/2-2/2-2.1/2-2.1:1.1/0003:413C:2010.0004/input/input2
[ 2.501607] hid-generic 0003:05AC:1000.0001: input,hidraw1: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0001:01:0b.0-3/input0
[ 2.511670] input: HID 05ac:1000 as /devices/pci0001:00/0001:00:08.0/0001:01:0b.0/usb2/2-3/2-3:1.1/0003:05AC:1000.0002/input/input3
[ 2.552559] hid-generic 0003:413C:2010.0004: input,hidraw2: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0001:01:0b.0-2.1/input1
[ 2.552737] hid-generic 0003:05AC:1000.0002: input,hidraw3: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0001:01:0b.0-3/input1
[ 2.643516] usb 2-2.3: new low-speed USB device number 5 using ohci-pci
[ 2.760487] usb 2-2.3: New USB device found, idVendor=045e, idProduct=0040
[ 2.778277] usb 2-2.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 2.796084] usb 2-2.3: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[ 2.813944] usb 2-2.3: Manufacturer: Microsoft
[ 2.841294] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0001:00/0001:00:08.0/0001:01:0b.0/usb2/2-2/2-2.3/2-2.3:1.0/0003:045E:0040.0005/input/input4
[ 2.856724] hid-generic 0003:045E:0040.0005: input,hidraw4: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0001:01:0b.0-2.3/input0
[ 3.366505] ata4: failed to resume link (SControl 0)
[ 3.385257] ata4: SATA link down (SStatus 0 SControl 0)
[ 3.407752] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD-RW GWA-4165B C006 PQ: 0 ANSI: 5
[ 3.426546] ata5.00: K2/Shasta alignment limits applied
[ 3.455738] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 3.466535] sd 0:0:0:0: [sda] Write Protect is off
[ 3.477124] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.477153] sr 4:0:0:0: [sr0] scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
[ 3.477176] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.497665] sda: [mac] sda1 sda2 sda3 sda4 sda5
[ 3.498109] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.499262] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.499316] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 3.541266] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.552066] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 3.879084] windfarm: initializing for dual-core desktop G5
[ 4.226585] random: nonblocking pool is initialized
[ 4.450941] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 5.119281] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[ 5.139747] systemd[1]: Detected architecture 'ppc64'.
[ 5.404458] systemd[1]: Inserted module 'autofs4'
[ 5.442843] systemd[1]: Set hostname to <powermac-g5-quad>.
[ 6.450092] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 6.470580] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 6.482109] systemd[1]: Starting Remote File Systems (Pre).
[ 6.505249] systemd[1]: Reached target Remote File Systems (Pre).
[ 6.516706] systemd[1]: Starting Encrypted Volumes.
[ 6.539605] systemd[1]: Reached target Encrypted Volumes.
[ 6.551008] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 6.574457] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 6.586201] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 6.598056] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 6.609958] systemd[1]: Starting Paths.
[ 6.633772] systemd[1]: Reached target Paths.
[ 6.645579] systemd[1]: Expecting device dev-disk-by\x2duuid-861a4b9b\x2df791\x2d4100\x2d9e21\x2d4ed0d0740fe9.device...
[ 6.669972] systemd[1]: Starting Root Slice.
[ 6.694434] systemd[1]: Created slice Root Slice.
[ 6.706577] systemd[1]: Starting User and Session Slice.
[ 6.730979] systemd[1]: Created slice User and Session Slice.
[ 6.742850] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 6.766959] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 6.779005] systemd[1]: Starting Delayed Shutdown Socket.
[ 6.802699] systemd[1]: Listening on Delayed Shutdown Socket.
[ 6.814190] systemd[1]: Starting Journal Socket (/dev/log).
[ 6.836860] systemd[1]: Listening on Journal Socket (/dev/log).
[ 6.847876] systemd[1]: Starting udev Control Socket.
[ 6.869838] systemd[1]: Listening on udev Control Socket.
[ 6.880654] systemd[1]: Starting udev Kernel Socket.
[ 6.902413] systemd[1]: Listening on udev Kernel Socket.
[ 6.913188] systemd[1]: Starting Journal Socket.
[ 6.934107] systemd[1]: Listening on Journal Socket.
[ 6.944137] systemd[1]: Starting System Slice.
[ 6.964291] systemd[1]: Created slice System Slice.
[ 6.974177] systemd[1]: Started File System Check on Root Device.
[ 6.984019] systemd[1]: Starting system-getty.slice.
[ 7.003866] systemd[1]: Created slice system-getty.slice.
[ 7.013660] systemd[1]: Starting Increase datagram queue length...
[ 7.095808] systemd[1]: Started Set Up Additional Binary Formats.
[ 7.113446] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 7.134637] systemd[1]: Mounting Huge Pages File System...
[ 7.155603] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.176678] systemd[1]: Mounting Debug File System...
[ 7.197497] systemd[1]: Starting udev Coldplug all Devices...
[ 7.349452] systemd[1]: Starting Load Kernel Modules...
[ 7.382007] systemd[1]: Starting Slices.
[ 7.401752] systemd[1]: Reached target Slices.
[ 7.422320] systemd[1]: Started Increase datagram queue length.
[ 7.432243] systemd[1]: Starting Syslog Socket.
[ 7.451381] systemd[1]: Listening on Syslog Socket.
[ 7.460959] systemd[1]: Starting Journal Service...
[ 7.490881] systemd[1]: Started Journal Service.
[ 7.575966] fuse init (API version 7.23)
[ 7.817656] loop: module loaded
[ 8.130023] snd-aoa-fabric-layout: Using PMF GPIOs
[ 8.213394] PowerMac i2c bus smu 14 registered
[ 8.228140] PowerMac i2c bus smu 11 registered
[ 8.236934] i2c i2c-1: i2c-powermac: register /smu@0,0/smu-i2c-control@0/i2c-bus@b/sat@b0
[ 8.237030] i2c i2c-1: i2c-powermac: register /smu@0,0/smu-i2c-control@0/i2c-bus@b/sat@b2
[ 8.237101] i2c i2c-1: i2c-powermac: register /smu@0,0/smu-i2c-control@0/i2c-bus@b/system-clock@d4
[ 8.237170] PowerMac i2c bus mac-io 0 registered
[ 8.245882] i2c i2c-2: i2c-powermac: register /ht@0,f2000000/pci@8/mac-io@7/i2c@18000/i2c-bus@0/codec@8c
[ 8.246077] i2c i2c-2: I2C transfer at 0x46 failed, size 2, err -6
[ 8.246080] snd-aoa-codec-onyx: failed to read control register
[ 8.254866] PowerMac i2c bus mac-io 0 registered
[ 8.263594] i2c i2c-3: i2c-powermac: register /ht@0,f2000000/pci@8/mac-io@7/i2c@18000/i2c-bus@0/codec@8c
[ 8.263973] i2c i2c-3: I2C transfer at 0x46 failed, size 2, err -6
[ 8.263975] snd-aoa-codec-onyx: failed to read control register
[ 8.263985] i2c i2c-3: i2c-powermac: register /ht@0,f2000000/pci@8/mac-io@7/i2c@18000/i2c-bus@0/codec@24
[ 8.264051] PowerMac i2c bus u4 1 registered
[ 8.264054] i2c i2c-4: i2c-powermac: register /u4@0,f8000000/i2c@f8001000/i2c-bus@1/temp-monitor@94
[ 8.264092] i2c i2c-4: i2c-powermac: register /u4@0,f8000000/i2c@f8001000/i2c-bus@1/temp-monitor@96
[ 8.264117] i2c i2c-4: i2c-powermac: register /u4@0,f8000000/i2c@f8001000/i2c-bus@1/temp-monitor@98
[ 8.264153] i2c i2c-4: i2c-powermac: register /u4@0,f8000000/i2c@f8001000/i2c-bus@1/temp-monitor@9c
[ 8.427167] systemd-udevd[211]: starting version 215
[ 9.168492] windfarm: CPUs control loops started.
[ 9.872800] pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org>)
[ 9.881081] 0.00013020:ch-a: ttyPZ0 at MMIO 0x80013020 (irq = 23, base_baud = 230400) is a Z85c30 ESCC - Serial port
[ 9.889581] 0.00013000:ch-b: ttyPZ1 at MMIO 0x80013000 (irq = 24, base_baud = 230400) is a Z85c30 ESCC - Serial port
[ 9.909744] Linux agpgart interface v0.103
[ 10.042393] sat 0 partition c8: c8 6 2 7f ff 2 ff 1 fb bf 0 59 0 20 0 0 0 7 89 37 0 a0 0 0
[ 10.174815] cfg80211: Calling CRDA to update world regulatory domain
[ 10.500544] [drm] Initialized drm 1.1.0 20060810
[ 10.692279] sat 0 partition c4: c4 4 1 7f a0 12 20 5f ff 55 29 14 7b 12 0 0
[ 10.746946] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 10.778674] b43-phy0: Broadcom 4318 WLAN found (core revision 9)
[ 10.793495] b43-phy0: Found PHY: Analog 3, Type 2 (G), Revision 7
[ 10.793515] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2050, Revision 8, Version 0
[ 10.800675] Broadcom 43xx driver loaded [ Features: PNL ]
[ 11.428254] checking generic (a0020000 258000) vs hw (a0000000 20000000)
[ 11.428259] fb: switching to nouveaufb from OFfb NVDA,Displ
[ 11.436742] Console: switching to colour dummy device 80x25
[ 11.437370] nouveau 0000:0a:00.0: enabling device (0006 -> 0007)
[ 11.438071] nouveau [ DEVICE][0000:0a:00.0] BOOT0 : 0x047d00a1
[ 11.438081] nouveau [ DEVICE][0000:0a:00.0] Chipset: G70 (NV47)
[ 11.438088] nouveau [ DEVICE][0000:0a:00.0] Family : NV40
[ 11.558175] sat 0 partition c9: c9 6 2 7f ff 2 ff 1 fb bf 0 59 0 20 0 0 0 7 89 37 0 a0 0 0
[ 11.611131] nouveau [ VBIOS][0000:0a:00.0] using image from PROM
[ 11.611532] nouveau [ VBIOS][0000:0a:00.0] BIT signature found
[ 11.611540] nouveau [ VBIOS][0000:0a:00.0] version 00.00.00.10.10
[ 11.611602] nouveau W[ VBIOS][0000:0a:00.0] DCB table not found
[ 11.611615] nouveau W[ VBIOS][0000:0a:00.0] DCB table not found
[ 11.611658] nouveau E[ VBIOS][0000:0a:00.0] 0x47a4[ ]: unknown opcode 0xff
[ 11.611666] nouveau E[ DEVINIT][0000:0a:00.0] init failed, -22
[ 11.611673] nouveau E[ DRM] failed to create 0x00000080, -22
[ 11.612251] nouveau: probe of 0000:0a:00.0 failed with error -22
[ 11.666202] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 11.843494] systemd-journald[191]: Received request to flush runtime journal from PID 1
[ 12.203983] sat 0 partition c5: c5 4 1 7f a0 12 20 5f ff 55 29 14 7b 12 0 0
[ 12.647574] usb 2-3: USB disconnect, device number 3
[ 12.670795] usb 2-3: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -62
[ 13.070185] sat 1 partition c8: c8 6 2 7f ff 2 ff 1 fb bf 0 59 0 20 0 0 0 7 89 37 0 a0 0 0
[ 13.121517] usb 2-3: new full-speed USB device number 6 using ohci-pci
[ 13.328523] cfg80211: Calling CRDA to update world regulatory domain
[ 13.336556] cfg80211: World regulatory domain updated:
[ 13.336581] cfg80211: DFS Master region: unset
[ 13.336587] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 13.336615] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 13.336634] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 13.336653] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 13.336673] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 13.336693] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 13.336713] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 13.336732] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 13.336751] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 13.539307] usb 2-3: New USB device found, idVendor=05ac, idProduct=8207
[ 13.539335] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 13.657535] Bluetooth: Core ver 2.20
[ 13.657573] NET: Registered protocol family 31
[ 13.657579] Bluetooth: HCI device and connection manager initialized
[ 13.657659] Bluetooth: HCI socket layer initialized
[ 13.657668] Bluetooth: L2CAP socket layer initialized
[ 13.657691] Bluetooth: SCO socket layer initialized
[ 13.720292] sat 1 partition c4: c4 4 1 7f a0 12 20 5f ff 55 b8 14 7b 12 0 0
[ 13.792654] usbcore: registered new interface driver btusb
[ 14.163842] Adding 793808k swap on /dev/sda4. Priority:-1 extents:1 across:793808k FS
[ 14.368478] systemd-journald[191]: Received request to flush runtime journal from PID 1
[ 14.586046] sat 1 partition c9: c9 6 2 7f ff 2 ff 1 fb bf 0 59 0 20 0 0 0 7 89 37 0 a0 0 0
[ 15.220611] RPC: Registered named UNIX socket transport module.
[ 15.220622] RPC: Registered udp transport module.
[ 15.220628] RPC: Registered tcp transport module.
[ 15.220634] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 15.232048] sat 1 partition c5: c5 4 1 7f a0 12 20 5f ff 55 48 15 7b 12 0 0
[ 15.264163] FS-Cache: Loaded
[ 15.345940] FS-Cache: Netfs 'nfs' registered for caching
[ 15.397183] Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org).
[ 15.860195] windfarm: Backside control loop started.
[ 15.912570] windfarm: Slots control loop started.
[ 16.018393] windfarm: Drive bay control loop started.
[ 16.943787] usb 2-2: USB disconnect, device number 2
[ 16.943812] usb 2-2.1: USB disconnect, device number 4
[ 16.985553] usb 2-2.3: USB disconnect, device number 5
[ 21.012837] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.012850] Bluetooth: BNEP filters: protocol multicast
[ 21.012865] Bluetooth: BNEP socket layer initialized
[ 21.897662] u3msi: allocated virq 0x20 (hw 0x8) addr 0xfee00000
[ 21.941183] u3msi: allocated virq 0x21 (hw 0x9) addr 0xfee00000
[ 22.114507] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 22.137638] b43-pci-bridge 0001:01:01.0: Using 32-bit DMA via iommu
[ 24.651029] tg3 0001:05:04.0 eth0: Link is up at 1000 Mbps, full duplex
[ 24.651059] tg3 0001:05:04.0 eth0: Flow control is on for TX and on for RX
[ 24.740101] tg3 0001:05:04.1 eth1: Link is up at 1000 Mbps, full duplex
[ 24.740119] tg3 0001:05:04.1 eth1: Flow control is on for TX and on for RX
[-- Attachment #3: NVDA,BMP --]
[-- Type: application/octet-stream, Size: 5820 bytes --]
[-- Attachment #4: Type: text/plain, Size: 153 bytes --]
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/nouveau
reply other threads:[~2015-07-12 21:48 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55A2E0A9.1070000@gmail.com \
--to=psaisanas-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.