diff for duplicates of <55A36939.7070607@samsung.com> diff --git a/a/1.txt b/N1/1.txt index b64000e..97a1624 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -9,7 +9,7 @@ On 13.07.2015 16:24, Vaibhav Hiremath wrote: >>> >>> This patch adds the devicetree binding to enable this feature. >>> ->>> Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org> +>>> Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >>> --- >>> Documentation/devicetree/bindings/mfd/88pm800.txt | 6 ++++++ >>> 1 file changed, 6 insertions(+) @@ -38,8 +38,8 @@ On 13.07.2015 16:24, Vaibhav Hiremath wrote: > > As per spec, (it only talks about power consumption in power down state) > -> Power-down State => VSYS > 2.8 => 4.5 ?A -> CLK32K2 = 0 => 18 ?W +> Power-down State => VSYS > 2.8 => 4.5 μA +> CLK32K2 = 0 => 18 μW This would be a power saving if it could be enabled/disabled runtime. But with DT you will either: @@ -66,3 +66,8 @@ for Samsung SoCs. They have two or three 32kHz clocks. Best regards, Krzysztof + +-- +To unsubscribe from this list: send the line "unsubscribe devicetree" in +the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org +More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/a/content_digest b/N1/content_digest index 4eaa000..c496eab 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -2,10 +2,17 @@ "ref\01436442431-3471-4-git-send-email-vaibhav.hiremath@linaro.org\0" "ref\055A0C1B8.4030402@samsung.com\0" "ref\055A367BE.6040103@linaro.org\0" - "From\0k.kozlowski@samsung.com (Krzysztof Kozlowski)\0" - "Subject\0[PATCH 3/6] mfd: devicetree: bindings: 88pm800: Add DT property for 32KHz output enable\0" + "ref\055A367BE.6040103-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org\0" + "From\0Krzysztof Kozlowski <k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>\0" + "Subject\0Re: [PATCH 3/6] mfd: devicetree: bindings: 88pm800: Add DT property for 32KHz output enable\0" "Date\0Mon, 13 Jul 2015 16:31:05 +0900\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Vaibhav Hiremath <vaibhav.hiremath-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>" + " linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org\0" + "Cc\0devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" + sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org + linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org + " lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org\0" "\00:1\0" "b\0" "On 13.07.2015 16:24, Vaibhav Hiremath wrote:\n" @@ -19,7 +26,7 @@ ">>>\n" ">>> This patch adds the devicetree binding to enable this feature.\n" ">>>\n" - ">>> Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>\n" + ">>> Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>\n" ">>> ---\n" ">>> Documentation/devicetree/bindings/mfd/88pm800.txt | 6 ++++++\n" ">>> 1 file changed, 6 insertions(+)\n" @@ -48,8 +55,8 @@ "> \n" "> As per spec, (it only talks about power consumption in power down state)\n" "> \n" - "> Power-down State => VSYS > 2.8 => 4.5 ?A\n" - "> CLK32K2 = 0 => 18 ?W\n" + "> Power-down State => VSYS > 2.8 => 4.5 \316\274A\n" + "> CLK32K2 = 0 => 18 \316\274W\n" "\n" "This would be a power saving if it could be enabled/disabled runtime.\n" "But with DT you will either:\n" @@ -75,6 +82,11 @@ "for Samsung SoCs. They have two or three 32kHz clocks.\n" "\n" "Best regards,\n" - Krzysztof + "Krzysztof\n" + "\n" + "--\n" + "To unsubscribe from this list: send the line \"unsubscribe devicetree\" in\n" + "the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\n" + More majordomo info at http://vger.kernel.org/majordomo-info.html -92892c1cc17edc1427fdc3b03b243f14cac46c40bdf477c2a7fe840c1008a92d +2f4e124181214107fa99527ccf6d284c4bfd5872be78c15f76fee79d15f4f2a8
diff --git a/a/1.txt b/N2/1.txt index b64000e..466ec92 100644 --- a/a/1.txt +++ b/N2/1.txt @@ -38,8 +38,8 @@ On 13.07.2015 16:24, Vaibhav Hiremath wrote: > > As per spec, (it only talks about power consumption in power down state) > -> Power-down State => VSYS > 2.8 => 4.5 ?A -> CLK32K2 = 0 => 18 ?W +> Power-down State => VSYS > 2.8 => 4.5 μA +> CLK32K2 = 0 => 18 μW This would be a power saving if it could be enabled/disabled runtime. But with DT you will either: diff --git a/a/content_digest b/N2/content_digest index 4eaa000..b4a0ca6 100644 --- a/a/content_digest +++ b/N2/content_digest @@ -2,10 +2,16 @@ "ref\01436442431-3471-4-git-send-email-vaibhav.hiremath@linaro.org\0" "ref\055A0C1B8.4030402@samsung.com\0" "ref\055A367BE.6040103@linaro.org\0" - "From\0k.kozlowski@samsung.com (Krzysztof Kozlowski)\0" - "Subject\0[PATCH 3/6] mfd: devicetree: bindings: 88pm800: Add DT property for 32KHz output enable\0" + "From\0Krzysztof Kozlowski <k.kozlowski@samsung.com>\0" + "Subject\0Re: [PATCH 3/6] mfd: devicetree: bindings: 88pm800: Add DT property for 32KHz output enable\0" "Date\0Mon, 13 Jul 2015 16:31:05 +0900\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Vaibhav Hiremath <vaibhav.hiremath@linaro.org>" + " linux-arm-kernel@lists.infradead.org\0" + "Cc\0devicetree@vger.kernel.org" + sameo@linux.intel.com + linux-kernel@vger.kernel.org + robh+dt@kernel.org + " lee.jones@linaro.org\0" "\00:1\0" "b\0" "On 13.07.2015 16:24, Vaibhav Hiremath wrote:\n" @@ -48,8 +54,8 @@ "> \n" "> As per spec, (it only talks about power consumption in power down state)\n" "> \n" - "> Power-down State => VSYS > 2.8 => 4.5 ?A\n" - "> CLK32K2 = 0 => 18 ?W\n" + "> Power-down State => VSYS > 2.8 => 4.5 \316\274A\n" + "> CLK32K2 = 0 => 18 \316\274W\n" "\n" "This would be a power saving if it could be enabled/disabled runtime.\n" "But with DT you will either:\n" @@ -77,4 +83,4 @@ "Best regards,\n" Krzysztof -92892c1cc17edc1427fdc3b03b243f14cac46c40bdf477c2a7fe840c1008a92d +04e5502944b6787c7dd65bf41ec0b08e947c291d9ffd4936aa5e74ca8a340ad0
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.