diff for duplicates of <55A36C5C.7000903@samsung.com> diff --git a/a/1.txt b/N1/1.txt index bad58b8..e972d4f 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -13,7 +13,7 @@ On 13.07.2015 16:38, Vaibhav Hiremath wrote: >>>>> >>>>> This patch adds the devicetree binding to enable this feature. >>>>> ->>>>> Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org> +>>>>> Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >>>>> --- >>>>> Documentation/devicetree/bindings/mfd/88pm800.txt | 6 ++++++ >>>>> 1 file changed, 6 insertions(+) @@ -43,8 +43,8 @@ On 13.07.2015 16:38, Vaibhav Hiremath wrote: >>> >>> As per spec, (it only talks about power consumption in power down state) >>> ->>> Power-down State => VSYS > 2.8 => 4.5 ?A ->>> CLK32K2 = 0 => 18 ?W +>>> Power-down State => VSYS > 2.8 => 4.5 μA +>>> CLK32K2 = 0 => 18 μW >> >> This would be a power saving if it could be enabled/disabled runtime. >> But with DT you will either: @@ -99,3 +99,7 @@ The drivers are actually a little more complicated than they should... :) Best regards, Krzysztof +-- +To unsubscribe from this list: send the line "unsubscribe devicetree" in +the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org +More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/a/content_digest b/N1/content_digest index 91765eb..842eb98 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -4,10 +4,17 @@ "ref\055A367BE.6040103@linaro.org\0" "ref\055A36939.7070607@samsung.com\0" "ref\055A36AE6.5070802@linaro.org\0" - "From\0k.kozlowski@samsung.com (Krzysztof Kozlowski)\0" - "Subject\0[PATCH 3/6] mfd: devicetree: bindings: 88pm800: Add DT property for 32KHz output enable\0" + "ref\055A36AE6.5070802-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org\0" + "From\0Krzysztof Kozlowski <k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>\0" + "Subject\0Re: [PATCH 3/6] mfd: devicetree: bindings: 88pm800: Add DT property for 32KHz output enable\0" "Date\0Mon, 13 Jul 2015 16:44:28 +0900\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Vaibhav Hiremath <vaibhav.hiremath-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>" + " linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org\0" + "Cc\0devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" + sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org + linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org + " lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org\0" "\00:1\0" "b\0" "On 13.07.2015 16:38, Vaibhav Hiremath wrote:\n" @@ -25,7 +32,7 @@ ">>>>>\n" ">>>>> This patch adds the devicetree binding to enable this feature.\n" ">>>>>\n" - ">>>>> Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>\n" + ">>>>> Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>\n" ">>>>> ---\n" ">>>>> Documentation/devicetree/bindings/mfd/88pm800.txt | 6 ++++++\n" ">>>>> 1 file changed, 6 insertions(+)\n" @@ -55,8 +62,8 @@ ">>>\n" ">>> As per spec, (it only talks about power consumption in power down state)\n" ">>>\n" - ">>> Power-down State => VSYS > 2.8 => 4.5 ?A\n" - ">>> CLK32K2 = 0 => 18 ?W\n" + ">>> Power-down State => VSYS > 2.8 => 4.5 \316\274A\n" + ">>> CLK32K2 = 0 => 18 \316\274W\n" ">>\n" ">> This would be a power saving if it could be enabled/disabled runtime.\n" ">> But with DT you will either:\n" @@ -110,6 +117,10 @@ "The drivers are actually a little more complicated than they should... :)\n" "\n" "Best regards,\n" - Krzysztof + "Krzysztof\n" + "--\n" + "To unsubscribe from this list: send the line \"unsubscribe devicetree\" in\n" + "the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\n" + More majordomo info at http://vger.kernel.org/majordomo-info.html -bf0786bb7e33f8891f0b6a437274ab2ec874d561c8b6c87a344fa08b66492daa +14a6529fed86b8c253fe8e4abf19185334c9f227aa8539818d0d36cd03ff897a
diff --git a/a/1.txt b/N2/1.txt index bad58b8..ee8373d 100644 --- a/a/1.txt +++ b/N2/1.txt @@ -43,8 +43,8 @@ On 13.07.2015 16:38, Vaibhav Hiremath wrote: >>> >>> As per spec, (it only talks about power consumption in power down state) >>> ->>> Power-down State => VSYS > 2.8 => 4.5 ?A ->>> CLK32K2 = 0 => 18 ?W +>>> Power-down State => VSYS > 2.8 => 4.5 μA +>>> CLK32K2 = 0 => 18 μW >> >> This would be a power saving if it could be enabled/disabled runtime. >> But with DT you will either: diff --git a/a/content_digest b/N2/content_digest index 91765eb..07614f4 100644 --- a/a/content_digest +++ b/N2/content_digest @@ -4,10 +4,16 @@ "ref\055A367BE.6040103@linaro.org\0" "ref\055A36939.7070607@samsung.com\0" "ref\055A36AE6.5070802@linaro.org\0" - "From\0k.kozlowski@samsung.com (Krzysztof Kozlowski)\0" - "Subject\0[PATCH 3/6] mfd: devicetree: bindings: 88pm800: Add DT property for 32KHz output enable\0" + "From\0Krzysztof Kozlowski <k.kozlowski@samsung.com>\0" + "Subject\0Re: [PATCH 3/6] mfd: devicetree: bindings: 88pm800: Add DT property for 32KHz output enable\0" "Date\0Mon, 13 Jul 2015 16:44:28 +0900\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Vaibhav Hiremath <vaibhav.hiremath@linaro.org>" + " linux-arm-kernel@lists.infradead.org\0" + "Cc\0devicetree@vger.kernel.org" + sameo@linux.intel.com + linux-kernel@vger.kernel.org + robh+dt@kernel.org + " lee.jones@linaro.org\0" "\00:1\0" "b\0" "On 13.07.2015 16:38, Vaibhav Hiremath wrote:\n" @@ -55,8 +61,8 @@ ">>>\n" ">>> As per spec, (it only talks about power consumption in power down state)\n" ">>>\n" - ">>> Power-down State => VSYS > 2.8 => 4.5 ?A\n" - ">>> CLK32K2 = 0 => 18 ?W\n" + ">>> Power-down State => VSYS > 2.8 => 4.5 \316\274A\n" + ">>> CLK32K2 = 0 => 18 \316\274W\n" ">>\n" ">> This would be a power saving if it could be enabled/disabled runtime.\n" ">> But with DT you will either:\n" @@ -112,4 +118,4 @@ "Best regards,\n" Krzysztof -bf0786bb7e33f8891f0b6a437274ab2ec874d561c8b6c87a344fa08b66492daa +3d4f53d0b906ec3b54131c6669ec7487315001678950bf107359d0b27104ffc3
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.