From mboxrd@z Thu Jan 1 00:00:00 1970 From: Vitaly Andrianov Subject: Re: [PATCH] gpio/davinci: add interrupt support for GPIOs 16-31 Date: Thu, 16 Jul 2015 13:41:53 -0400 Message-ID: <55A7ECE1.2060704@ti.com> References: <1434647449-5393-1-git-send-email-vitalya@ti.com> <55A77392.30400@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8"; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <55A77392.30400@ti.com> Sender: linux-kernel-owner@vger.kernel.org To: Sekhar Nori , Linus Walleij , Kevin Hilman Cc: Alexandre Courbot , "linux-kernel@vger.kernel.org" , "linux-gpio@vger.kernel.org" List-Id: linux-gpio@vger.kernel.org On 07/16/2015 05:04 AM, Sekhar Nori wrote: > On Tuesday 14 July 2015 07:31 PM, Linus Walleij wrote: >> On Thu, Jun 18, 2015 at 7:10 PM, Vitaly Andrianov wrote: >> >>> Interrupts for GPIOs 16 through 31 are enabled by bit 1 in the >>> "binten" register (offset 8). Previous versions of GPIO only >>> used bit 0, which enables GPIO 0-15 interrupts. >>> >>> Signed-off-by: Reece Pollack >>> Signed-off-by: Vitaly Andrianov >> >> Sekhar/Kevin: OK with this? We don't have a maintainer >> listed for davinci GPIO so I assume it's you guys... > > Hi Linus, I had reviewed this patch and there was a v2 send based on my > comments on July 03. > >> Should this be tagged for stable? > > Not sure about that. It affects Keystone devices. Vitaly? > > Thanks, > Sekhar > We used this patch for a long time. So, I guess it is stable. Thanks, Vitaly