From: Denis Ciocca <denis.ciocca@st.com>
To: Giuseppe BARBA <giuseppe.barba@st.com>,
"linux-iio@vger.kernel.org" <linux-iio@vger.kernel.org>
Cc: "jic23@kernel.org" <jic23@kernel.org>
Subject: Re: [PATCH V4 4/5] iio: st-accel: add support for lsm303agr accelerometer
Date: Tue, 21 Jul 2015 18:44:26 +0800 [thread overview]
Message-ID: <55AE228A.2080505@st.com> (raw)
In-Reply-To: <1437467745-18435-5-git-send-email-giuseppe.barba@st.com>
Acked-by: Denis Ciocca <denis.ciocca@st.com>
On 07/21/2015 04:35 PM, Giuseppe BARBA wrote:
> This adds support for the lsm303agr accelerometer.
>
> Signed-off-by: Giuseppe Barba <giuseppe.barba@st.com>
> ---
> Documentation/devicetree/bindings/iio/st-sensors.txt | 1 +
> drivers/iio/accel/st_accel.h | 1 +
> drivers/iio/accel/st_accel_core.c | 1 +
> drivers/iio/accel/st_accel_i2c.c | 5 +++++
> drivers/iio/accel/st_accel_spi.c | 1 +
> 5 files changed, 9 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/iio/st-sensors.txt b/Documentation/devicetree/bindings/iio/st-sensors.txt
> index 8a6be3b..d80bdaa 100644
> --- a/Documentation/devicetree/bindings/iio/st-sensors.txt
> +++ b/Documentation/devicetree/bindings/iio/st-sensors.txt
> @@ -35,6 +35,7 @@ Accelerometers:
> - st,lsm303dl-accel
> - st,lsm303dlm-accel
> - st,lsm330-accel
> +- st,lsm303agr-accel
>
> Gyroscopes:
> - st,l3g4200d-gyro
> diff --git a/drivers/iio/accel/st_accel.h b/drivers/iio/accel/st_accel.h
> index aa10019..468f21f 100644
> --- a/drivers/iio/accel/st_accel.h
> +++ b/drivers/iio/accel/st_accel.h
> @@ -26,6 +26,7 @@
> #define LSM303DLH_ACCEL_DEV_NAME "lsm303dlh_accel"
> #define LSM303DLM_ACCEL_DEV_NAME "lsm303dlm_accel"
> #define LSM330_ACCEL_DEV_NAME "lsm330_accel"
> +#define LSM303AGR_ACCEL_DEV_NAME "lsm303agr_accel"
>
> /**
> * struct st_sensors_platform_data - default accel platform data
> diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
> index 12b42f6..ff30f88 100644
> --- a/drivers/iio/accel/st_accel_core.c
> +++ b/drivers/iio/accel/st_accel_core.c
> @@ -233,6 +233,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
> [2] = LSM330D_ACCEL_DEV_NAME,
> [3] = LSM330DL_ACCEL_DEV_NAME,
> [4] = LSM330DLC_ACCEL_DEV_NAME,
> + [5] = LSM303AGR_ACCEL_DEV_NAME,
> },
> .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
> .odr = {
> diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
> index a2f1c20..8b9cc84 100644
> --- a/drivers/iio/accel/st_accel_i2c.c
> +++ b/drivers/iio/accel/st_accel_i2c.c
> @@ -68,6 +68,10 @@ static const struct of_device_id st_accel_of_match[] = {
> .compatible = "st,lsm330-accel",
> .data = LSM330_ACCEL_DEV_NAME,
> },
> + {
> + .compatible = "st,lsm303agr-accel",
> + .data = LSM303AGR_ACCEL_DEV_NAME,
> + },
> {},
> };
> MODULE_DEVICE_TABLE(of, st_accel_of_match);
> @@ -116,6 +120,7 @@ static const struct i2c_device_id st_accel_id_table[] = {
> { LSM303DL_ACCEL_DEV_NAME },
> { LSM303DLM_ACCEL_DEV_NAME },
> { LSM330_ACCEL_DEV_NAME },
> + { LSM303AGR_ACCEL_DEV_NAME },
> {},
> };
> MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
> diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c
> index 12ec293..54b61a3 100644
> --- a/drivers/iio/accel/st_accel_spi.c
> +++ b/drivers/iio/accel/st_accel_spi.c
> @@ -57,6 +57,7 @@ static const struct spi_device_id st_accel_id_table[] = {
> { LSM303DL_ACCEL_DEV_NAME },
> { LSM303DLM_ACCEL_DEV_NAME },
> { LSM330_ACCEL_DEV_NAME },
> + { LSM303AGR_ACCEL_DEV_NAME },
> {},
> };
> MODULE_DEVICE_TABLE(spi, st_accel_id_table);
next prev parent reply other threads:[~2015-07-21 10:44 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-21 8:35 [PATCH V4 0/5] Added ST LSM303AGR sensor Giuseppe Barba
2015-07-21 8:35 ` [PATCH V4 1/5] iio: st-sensors: add configuration for WhoAmI address Giuseppe Barba
2015-07-21 10:43 ` Denis Ciocca
2015-07-23 19:36 ` Jonathan Cameron
2015-07-21 8:35 ` [PATCH V4 2/5] iio: st-sensors: add support for single full scale device Giuseppe Barba
2015-07-21 10:44 ` Denis Ciocca
2015-07-21 8:35 ` [PATCH V4 3/5] iio: st_magn: Add irq trigger handling Giuseppe Barba
2015-07-21 10:44 ` Denis Ciocca
2015-07-21 8:35 ` [PATCH V4 4/5] iio: st-accel: add support for lsm303agr accelerometer Giuseppe Barba
2015-07-21 10:44 ` Denis Ciocca [this message]
2015-07-23 19:40 ` Jonathan Cameron
2015-07-21 8:35 ` [PATCH V4 5/5] iio: st-magn: add support for lsm303agr magnetometer Giuseppe Barba
2015-07-21 10:44 ` Denis Ciocca
2015-07-23 19:42 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55AE228A.2080505@st.com \
--to=denis.ciocca@st.com \
--cc=giuseppe.barba@st.com \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.