diff for duplicates of <55AE53F2.5080904@atmel.com> diff --git a/a/1.txt b/N1/1.txt index 420d80a..ceea544 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -1,6 +1,6 @@ Hi Lee, -Le 21/07/2015 11:09, Lee Jones a ?crit : +Le 21/07/2015 11:09, Lee Jones a écrit : > On Mon, 22 Jun 2015, Cyrille Pitchen wrote: ... >> +- atmel,flexcom-mode: shall be a string among { "spi", "usart", "i2c", "twi" }. @@ -52,7 +52,7 @@ That's why the Flexcom DT node should have exactly one child. >> +Example: >> + ->> +flx0: flexcom at f8034000 { +>> +flx0: flexcom@f8034000 { > > What references this node? If nothing, then you can remove the label. OK, I will remove the label in the next series. @@ -65,7 +65,7 @@ OK, I will remove the label in the next series. >> + ranges = <0x0 0xf8034000 0x800>; >> + atmel,flexcom-mode = "spi"; >> + ->> + spi at f8034400 { +>> + spi@f8034400 { >> + compatible = "atmel,at91rm9200-spi"; >> + reg = <0x400 0x200>; >> + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; @@ -77,7 +77,7 @@ OK, I will remove the label in the next series. >> + clock-names = "spi_clk"; >> + atmel,fifo-size = <32>; >> + ->> + mtd_dataflash at 0 { +>> + mtd_dataflash@0 { >> + compatible = "atmel,at25f512b"; >> + reg = <0>; >> + spi-max-frequency = <20000000>; @@ -91,3 +91,7 @@ Thanks for your review :) Best Regards, Cyrille +-- +To unsubscribe from this list: send the line "unsubscribe devicetree" in +the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org +More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/a/content_digest b/N1/content_digest index c87a7b2..9f0d236 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,15 +1,27 @@ "ref\0cover.1434967670.git.cyrille.pitchen@atmel.com\0" "ref\0337ab4936bd6ec2f24c42e2f8f363df21f491a02.1434967670.git.cyrille.pitchen@atmel.com\0" "ref\020150721090910.GG3061@x1\0" - "From\0cyrille.pitchen@atmel.com (Cyrille Pitchen)\0" - "Subject\0[PATCH v4 1/2] mfd: devicetree: add bindings for Atmel Flexcom\0" + "From\0Cyrille Pitchen <cyrille.pitchen-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>\0" + "Subject\0Re: [PATCH v4 1/2] mfd: devicetree: add bindings for Atmel Flexcom\0" "Date\0Tue, 21 Jul 2015 16:15:14 +0200\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>\0" + "Cc\0nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org" + boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org + alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org + sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org + linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org + linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org + pawel.moll-5wv7dgnIgG8@public.gmane.org + mark.rutland-5wv7dgnIgG8@public.gmane.org + ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org + galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org + " devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\0" "\00:1\0" "b\0" "Hi Lee,\n" "\n" - "Le 21/07/2015 11:09, Lee Jones a ?crit :\n" + "Le 21/07/2015 11:09, Lee Jones a \303\251crit :\n" "> On Mon, 22 Jun 2015, Cyrille Pitchen wrote:\n" "...\n" ">> +- atmel,flexcom-mode: shall be a string among { \"spi\", \"usart\", \"i2c\", \"twi\" }.\n" @@ -61,7 +73,7 @@ "\n" ">> +Example:\n" ">> +\n" - ">> +flx0: flexcom at f8034000 {\n" + ">> +flx0: flexcom@f8034000 {\n" "> \n" "> What references this node? If nothing, then you can remove the label.\n" "OK, I will remove the label in the next series.\n" @@ -74,7 +86,7 @@ ">> +\tranges = <0x0 0xf8034000 0x800>;\n" ">> +\tatmel,flexcom-mode = \"spi\";\n" ">> +\n" - ">> +\tspi at f8034400 {\n" + ">> +\tspi@f8034400 {\n" ">> +\t\tcompatible = \"atmel,at91rm9200-spi\";\n" ">> +\t\treg = <0x400 0x200>;\n" ">> +\t\tinterrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;\n" @@ -86,7 +98,7 @@ ">> +\t\tclock-names = \"spi_clk\";\n" ">> +\t\tatmel,fifo-size = <32>;\n" ">> +\n" - ">> +\t\tmtd_dataflash at 0 {\n" + ">> +\t\tmtd_dataflash@0 {\n" ">> +\t\t\tcompatible = \"atmel,at25f512b\";\n" ">> +\t\t\treg = <0>;\n" ">> +\t\t\tspi-max-frequency = <20000000>;\n" @@ -99,6 +111,10 @@ "\n" "Best Regards,\n" "\n" - Cyrille + "Cyrille\n" + "--\n" + "To unsubscribe from this list: send the line \"unsubscribe devicetree\" in\n" + "the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\n" + More majordomo info at http://vger.kernel.org/majordomo-info.html -3923c5b65dca70acbb59a80006106903b8233ac2ee28fbdc7bf8bea5bb9d3cfb +24f4573709791eeec3f6b2cbf68562fbb316302265a6b8ea7a91c133b47f67a0
diff --git a/a/1.txt b/N2/1.txt index 420d80a..d9f56e7 100644 --- a/a/1.txt +++ b/N2/1.txt @@ -1,6 +1,6 @@ Hi Lee, -Le 21/07/2015 11:09, Lee Jones a ?crit : +Le 21/07/2015 11:09, Lee Jones a écrit : > On Mon, 22 Jun 2015, Cyrille Pitchen wrote: ... >> +- atmel,flexcom-mode: shall be a string among { "spi", "usart", "i2c", "twi" }. @@ -52,7 +52,7 @@ That's why the Flexcom DT node should have exactly one child. >> +Example: >> + ->> +flx0: flexcom at f8034000 { +>> +flx0: flexcom@f8034000 { > > What references this node? If nothing, then you can remove the label. OK, I will remove the label in the next series. @@ -65,7 +65,7 @@ OK, I will remove the label in the next series. >> + ranges = <0x0 0xf8034000 0x800>; >> + atmel,flexcom-mode = "spi"; >> + ->> + spi at f8034400 { +>> + spi@f8034400 { >> + compatible = "atmel,at91rm9200-spi"; >> + reg = <0x400 0x200>; >> + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; @@ -77,7 +77,7 @@ OK, I will remove the label in the next series. >> + clock-names = "spi_clk"; >> + atmel,fifo-size = <32>; >> + ->> + mtd_dataflash at 0 { +>> + mtd_dataflash@0 { >> + compatible = "atmel,at25f512b"; >> + reg = <0>; >> + spi-max-frequency = <20000000>; diff --git a/a/content_digest b/N2/content_digest index c87a7b2..ec17bef 100644 --- a/a/content_digest +++ b/N2/content_digest @@ -1,15 +1,27 @@ "ref\0cover.1434967670.git.cyrille.pitchen@atmel.com\0" "ref\0337ab4936bd6ec2f24c42e2f8f363df21f491a02.1434967670.git.cyrille.pitchen@atmel.com\0" "ref\020150721090910.GG3061@x1\0" - "From\0cyrille.pitchen@atmel.com (Cyrille Pitchen)\0" - "Subject\0[PATCH v4 1/2] mfd: devicetree: add bindings for Atmel Flexcom\0" + "From\0Cyrille Pitchen <cyrille.pitchen@atmel.com>\0" + "Subject\0Re: [PATCH v4 1/2] mfd: devicetree: add bindings for Atmel Flexcom\0" "Date\0Tue, 21 Jul 2015 16:15:14 +0200\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Lee Jones <lee.jones@linaro.org>\0" + "Cc\0<nicolas.ferre@atmel.com>" + <boris.brezillon@free-electrons.com> + <alexandre.belloni@free-electrons.com> + <sameo@linux.intel.com> + <linux-arm-kernel@lists.infradead.org> + <linux-kernel@vger.kernel.org> + <robh+dt@kernel.org> + <pawel.moll@arm.com> + <mark.rutland@arm.com> + <ijc+devicetree@hellion.org.uk> + <galak@codeaurora.org> + " <devicetree@vger.kernel.org>\0" "\00:1\0" "b\0" "Hi Lee,\n" "\n" - "Le 21/07/2015 11:09, Lee Jones a ?crit :\n" + "Le 21/07/2015 11:09, Lee Jones a \303\251crit :\n" "> On Mon, 22 Jun 2015, Cyrille Pitchen wrote:\n" "...\n" ">> +- atmel,flexcom-mode: shall be a string among { \"spi\", \"usart\", \"i2c\", \"twi\" }.\n" @@ -61,7 +73,7 @@ "\n" ">> +Example:\n" ">> +\n" - ">> +flx0: flexcom at f8034000 {\n" + ">> +flx0: flexcom@f8034000 {\n" "> \n" "> What references this node? If nothing, then you can remove the label.\n" "OK, I will remove the label in the next series.\n" @@ -74,7 +86,7 @@ ">> +\tranges = <0x0 0xf8034000 0x800>;\n" ">> +\tatmel,flexcom-mode = \"spi\";\n" ">> +\n" - ">> +\tspi at f8034400 {\n" + ">> +\tspi@f8034400 {\n" ">> +\t\tcompatible = \"atmel,at91rm9200-spi\";\n" ">> +\t\treg = <0x400 0x200>;\n" ">> +\t\tinterrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;\n" @@ -86,7 +98,7 @@ ">> +\t\tclock-names = \"spi_clk\";\n" ">> +\t\tatmel,fifo-size = <32>;\n" ">> +\n" - ">> +\t\tmtd_dataflash at 0 {\n" + ">> +\t\tmtd_dataflash@0 {\n" ">> +\t\t\tcompatible = \"atmel,at25f512b\";\n" ">> +\t\t\treg = <0>;\n" ">> +\t\t\tspi-max-frequency = <20000000>;\n" @@ -101,4 +113,4 @@ "\n" Cyrille -3923c5b65dca70acbb59a80006106903b8233ac2ee28fbdc7bf8bea5bb9d3cfb +11a5d0c1b25c8fc69071618352fde989937a2731831ce076a293401e45e81a23
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.