Re: [PATCH 2/4] serial: 8250_dw: Add UPF_SKIP_TEST to flags depend on device tree

[Peter Hurley <peter@hurleysoftware.com>]

Hi Noam,

On 07/22/2015 05:34 AM, Noam Camus wrote:
> From: Noam Camus <noamc@ezchip.com>
> 
> Add support for OF option "no-loopback-test"

Changes to devicetree need to at least get acks from DT maintainers.

Regards,
Peter Hurley

> use case: simulator which does not implements loopback test mode.
> 
> Signed-off-by: Noam Camus <noamc@ezchip.com>
> ---
>  .../bindings/serial/snps-dw-apb-uart.txt           |    2 ++
>  drivers/tty/serial/8250/8250_dw.c                  |    3 +++
>  2 files changed, 5 insertions(+), 0 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt
> index 289c40e..5d16047 100644
> --- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt
> +++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt
> @@ -33,6 +33,8 @@ Optional properties:
>  - ri-override : Override the RI modem status signal. This signal will always be
>    reported as inactive instead of being obtained from the modem status register.
>    Define this if your serial port does not use this pin.
> +- no-loopback-test: set to indicate that the port does not implements loopback
> +  test mode
>  
>  Example:
>  
> diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
> index fe0b487..1a57105 100644
> --- a/drivers/tty/serial/8250/8250_dw.c
> +++ b/drivers/tty/serial/8250/8250_dw.c
> @@ -370,6 +370,9 @@ static int dw8250_probe_of(struct uart_port *p,
>  		up->dma->txconf.dst_maxburst = p->fifosize / 4;
>  	}
>  
> +	if (of_find_property(np, "no-loopback-test", NULL))
> +		p->flags |= UPF_SKIP_TEST;
> +
>  	if (!of_property_read_u32(np, "reg-shift", &val))
>  		p->regshift = val;
>  
>