Re: QCA6174 hw2.1 on Clevo P750ZM

From: Alexandre Maloteaux <a.maloteaux@gmail.com>
To: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: Michal Kazior <michal.kazior@tieto.com>,
	"ath10k@lists.infradead.org" <ath10k@lists.infradead.org>
Subject: Re: QCA6174 hw2.1 on Clevo P750ZM
Date: Fri, 24 Jul 2015 11:43:28 +0100	[thread overview]
Message-ID: <55B216D0.5090600@gmail.com> (raw)
In-Reply-To: <87oaj3gedw.fsf@kamboji.qca.qualcomm.com>

Hi i would like to test with other board.bin but i m facing the  timeout
issue. Each time the ath10k_pci module fail with a firmware there is a
timeout of 1 minute before testing the next one. Any idea what could help ?

[Fri Jul 24 11:10:02 2015] ath10k_pci 0000:06:00.0: pci irq legacy
interrupts 0 irq_mode 1 reset_mode 0
[Fri Jul 24 11:10:03 2015] ath10k_pci 0000:06:00.0: Direct firmware load
for ath10k/cal-pci-0000:06:00.0.bin failed with error -2
[Fri Jul 24 11:10:03 2015] ath10k_pci 0000:06:00.0: Falling back to user
helper
[Fri Jul 24 11:11:03 2015] ath10k_pci 0000:06:00.0: Direct firmware load
for ath10k/QCA6174/hw2.1/firmware-5.bin failed with error -2
[Fri Jul 24 11:11:03 2015] ath10k_pci 0000:06:00.0: Falling back to user
helper
[Fri Jul 24 11:12:03 2015] ath10k_pci 0000:06:00.0: could not fetch
firmware file 'ath10k/QCA6174/hw2.1/firmware-5.bin': -11
[Fri Jul 24 11:12:04 2015] ath10k_pci 0000:06:00.0: qca6174 hw2.1
(0x05010000, 0x003405ff, 168c:003e:1a56:1525) fw killer-n1525-fw api 4
htt-ver 3.0 wmi-op 4 htt-op 3 cal otp max-sta 32 features
\xffffff80\xffffff94\xfffffff8\xffffff96\xffffff88\xffffffff\xffffffff
[Fri Jul 24 11:12:04 2015] ath10k_pci 0000:06:00.0: debug 1 debugfs 1
tracing 1 dfs 0 testmode 0
[Fri Jul 24 11:12:04 2015] ath: EEPROM regdomain: 0x6c
[Fri Jul 24 11:12:04 2015] ath: EEPROM indicates we should expect a
direct regpair map
[Fri Jul 24 11:12:04 2015] ath: Country alpha2 being used: 00
[Fri Jul 24 11:12:04 2015] ath: Regpair used: 0x6c
[Fri Jul 24 11:12:04 2015] ath10k_pci 0000:06:00.0 wlp6s0: renamed from
wlan0
[Fri Jul 24 11:14:42 2015] ath10k_pci 0000:06:00.0: no channel
configured; ignoring frame(s)!
[Fri Jul 24 11:19:57 2015] ath10k_pci 0000:06:00.0: no channel
configured; ignoring frame(s)!
[Fri Jul 24 11:21:00 2015] ath10k_pci 0000:06:00.0: no channel
configured; ignoring frame(s)!
[Fri Jul 24 11:21:00 2015] ath10k_pci 0000:06:00.0: no channel
configured; ignoring frame(s)!
[Fri Jul 24 11:34:54 2015] CPU: 2 PID: 14153 Comm: hexchat Tainted:
P           O    4.2.0-rc3-wl-ath-KVALO-ATH-MASTER+ #4
[Fri Jul 24 11:34:54 2015]  [<ffffffff8156b3ee>]
entry_SYSCALL_64_fastpath+0x12/0x71
[Fri Jul 24 11:37:50 2015] ath10k_pci 0000:06:00.0: no channel
configured; ignoring frame(s)!

On 07/23/2015 03:03 PM, Kalle Valo wrote:
> Alexandre Maloteaux <a.maloteaux@gmail.com> writes:
>
>> 0x003405ff, 168c:003e:1a56:1525 fallback) fw killer-n1525-fw api 4
>> htt-ver 3.0 wmi-op 4 htt-op 3 cal otp max-sta 32 features
>> \xffffff80\xffffffd4\xffffffa8\xfffffff9\xffffff88\xffffffff\xffffffff
> What's happening with the features string here? What might cause that?
>

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k