From: Denis Kenzior <denkenz@gmail.com>
To: ofono@ofono.org
Subject: Re: query
Date: Thu, 30 Jul 2015 16:21:21 -0500 [thread overview]
Message-ID: <55BA9551.6000900@gmail.com> (raw)
In-Reply-To: <222E70FA67D72A4FB8EEDF5AF01724ACCF2637@BGSMSX102.gar.corp.intel.com>
[-- Attachment #1: Type: text/plain, Size: 985 bytes --]
Hi Ram,
On 07/30/2015 07:49 AM, Kallumari Nagaraja Rao, RammohanX wrote:
> Hi Denis,
>
> Can't we use the existing ofono UBLOX driver to work with serial interfaces instead of USB interface ?
>
Not in its current form, no.
USB devices generally come pre-multiplexed. What this means is that
they expose multiple AT ports (e.g. ttyACM1, ttyACM2, etc). oFono
requires two if the modem uses PPP (which the ublox driver is currently
using). This is necessary as a second control port is needed for
control while another is being occupied by PPP packets.
Serial devices use a single serial port and will require some form of
multiplexing in order to enable properly. Most support 07.10/27.010
multiplexing via AT+CMUX.
Your options are to write a new modem driver for your device, or extend
the ublox driver to handle serial devices. Refer to plugins/ifx.c or
plugins/calypso.c for an example of a driver that uses multiplexing.
Regards,
-Denis
next prev parent reply other threads:[~2015-07-30 21:21 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-28 9:27 query Kallumari
2015-07-29 13:12 ` query Kallumari
2015-07-29 15:27 ` query Denis Kenzior
2015-07-29 15:23 ` query Denis Kenzior
2015-07-30 4:03 ` query Kallumari
2015-07-30 12:49 ` query Kallumari
2015-07-30 21:21 ` Denis Kenzior [this message]
-- strict thread matches above, loose matches on Subject: below --
2012-01-11 15:51 query Anshul Kundra
2012-01-11 19:54 ` query Eric Sandeen
2012-01-11 14:43 Query Anshul Kundra
2011-05-18 20:42 query Filip, Anotonov
2011-03-16 9:36 Query snmp snmp
[not found] ` <AANLkTik+c0DvFzkoAzWDXsBSkq4HyHBtA0tuxkLnKu6F@mail.gmail.com>
2011-03-17 9:13 ` Query snmp snmp
2011-03-16 9:35 Query snmp snmp
2011-03-16 11:54 ` Query Alan Cox
2011-03-17 12:04 ` Query snmp snmp
2010-01-11 14:12 Query RahulSrivastava 71616
2010-01-11 17:05 ` Query Vlad Yasevich
2010-01-12 4:56 ` Query RahulSrivastava 71616
2010-01-12 20:52 ` Query Vlad Yasevich
2011-04-05 6:30 ` Query RahulSrivastava 71616
2009-05-22 7:45 Query Vandana Vuthoo
2009-05-22 19:49 ` Query Adrian Pardini
2008-05-02 12:27 query Nandedkar, Rishiraj
2008-05-02 12:51 ` query Stefan Smietanowski
2008-05-02 13:03 ` query Eric Sandeen
2008-05-02 10:42 query Nandedkar, Rishiraj
2008-05-02 12:05 ` query Emmanuel Florac
2008-05-02 12:25 ` query Emmanuel Florac
2008-05-02 10:08 query Nandedkar, Rishiraj
2008-05-02 10:35 ` query Emmanuel Florac
2008-05-02 11:14 ` query Andi Kleen
2006-05-09 11:06 query Chandrashekhar
2006-02-10 4:35 Query aparna misri
2006-02-10 13:30 ` Query Rob Sterenborg
2006-02-10 13:41 ` Query Pablo Sanchez
2006-02-10 13:46 ` Query David Vogt
2006-02-10 14:02 ` Query Rob Sterenborg
2006-02-10 14:05 ` Query David Vogt
2006-02-10 14:28 ` Query Rob Sterenborg
2005-08-09 10:28 query raja
2005-08-09 10:40 ` query Nikhil Dharashivkar
2005-08-09 10:58 ` query Sudheer
2005-05-19 6:24 Query Ashwin Nayak
2005-05-19 6:24 ` Query Philip Edelbrock
2005-05-19 6:24 ` Query Jean Delvare
2004-12-21 12:08 Query Rudresh NB
2004-12-21 12:19 ` Query Artem B. Bityuckiy
2004-12-21 12:42 ` Query Estelle HAMMACHE
2004-12-22 9:05 ` Query Rudresh NB
2004-12-22 9:26 ` Query Estelle HAMMACHE
2004-06-25 13:13 query Manish RATHI
2003-10-23 13:56 query Lever, Charles
2003-10-21 11:09 query Sundareswar Jayakumar
2003-10-22 2:53 ` query Neil Brown
2003-10-22 14:45 ` query Trond Myklebust
2002-10-11 10:46 cross-compiler and stdarg.h Steven Scholz
2002-10-11 11:20 ` Query Anish
2002-10-11 11:43 ` Query Wolfgang Denk
2002-03-06 9:46 Query Hammad Qureshi
2002-03-06 8:07 ` Query Paul Davis
2001-06-02 10:08 query Chanchal Chawla
2001-06-03 14:42 ` query Andreas Dilger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55BA9551.6000900@gmail.com \
--to=denkenz@gmail.com \
--cc=ofono@ofono.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.