From mboxrd@z Thu Jan 1 00:00:00 1970 From: net147@gmail.com (Jonathan Liu) Date: Sat, 01 Aug 2015 00:23:19 +1000 Subject: [linux-sunxi] [PATCH v5 2/7] phy-sun4i-usb: Add extcon support for the otg phy (phy0) In-Reply-To: <1434199071-22127-3-git-send-email-hdegoede@redhat.com> References: <1434199071-22127-1-git-send-email-hdegoede@redhat.com> <1434199071-22127-3-git-send-email-hdegoede@redhat.com> Message-ID: <55BB84D7.70109@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Hans, On 13/06/2015 10:37 PM, Hans de Goede wrote: > The sunxi musb glue needs to know if a host or normal usb cable is plugged > in, add extcon support so that the musb glue can monitor the host status. > > Signed-off-by: Hans de Goede > --- > Changes in v5: > -Split out of the "Add id and vbus detection support" commit > -Ported to the new extcon API queued for 4.2 > --- > drivers/phy/Kconfig | 1 + > drivers/phy/phy-sun4i-usb.c | 32 +++++++++++++++++++++++++++++++- > 2 files changed, 32 insertions(+), 1 deletion(-) > > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig > index a53bd5b..9841780 100644 > --- a/drivers/phy/Kconfig > +++ b/drivers/phy/Kconfig > @@ -173,6 +173,7 @@ config PHY_SUN4I_USB > tristate "Allwinner sunxi SoC USB PHY driver" > depends on ARCH_SUNXI && HAS_IOMEM && OF > depends on RESET_CONTROLLER > + depends on EXTCON > select GENERIC_PHY > help > Enable this to support the transceiver that is part of Allwinner > Should probably add CONFIG_EXTCON=y to arch/arm/configs/sunxi_defconfig so that CONFIG_PHY_SUN4I_USB=y works out of the box. Regards, Jonathan From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jonathan Liu Subject: Re: [linux-sunxi] [PATCH v5 2/7] phy-sun4i-usb: Add extcon support for the otg phy (phy0) Date: Sat, 01 Aug 2015 00:23:19 +1000 Message-ID: <55BB84D7.70109@gmail.com> References: <1434199071-22127-1-git-send-email-hdegoede@redhat.com> <1434199071-22127-3-git-send-email-hdegoede@redhat.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1434199071-22127-3-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> Sender: linux-usb-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org, Felipe Balbi , Kishon Vijay Abraham I Cc: Chanwoo Choi , Maxime Ripard , Chen-Yu Tsai , Roman Byshko , linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree , linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org List-Id: devicetree@vger.kernel.org Hi Hans, On 13/06/2015 10:37 PM, Hans de Goede wrote: > The sunxi musb glue needs to know if a host or normal usb cable is plugged > in, add extcon support so that the musb glue can monitor the host status. > > Signed-off-by: Hans de Goede > --- > Changes in v5: > -Split out of the "Add id and vbus detection support" commit > -Ported to the new extcon API queued for 4.2 > --- > drivers/phy/Kconfig | 1 + > drivers/phy/phy-sun4i-usb.c | 32 +++++++++++++++++++++++++++++++- > 2 files changed, 32 insertions(+), 1 deletion(-) > > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig > index a53bd5b..9841780 100644 > --- a/drivers/phy/Kconfig > +++ b/drivers/phy/Kconfig > @@ -173,6 +173,7 @@ config PHY_SUN4I_USB > tristate "Allwinner sunxi SoC USB PHY driver" > depends on ARCH_SUNXI && HAS_IOMEM && OF > depends on RESET_CONTROLLER > + depends on EXTCON > select GENERIC_PHY > help > Enable this to support the transceiver that is part of Allwinner > Should probably add CONFIG_EXTCON=y to arch/arm/configs/sunxi_defconfig so that CONFIG_PHY_SUN4I_USB=y works out of the box. Regards, Jonathan -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html