From: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
To: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
Thomas Abraham <thomas.ab@samsung.com>,
Sylwester Nawrocki <s.nawrocki@samsung.com>,
Michael Turquette <mturquette@baylibre.com>,
Kukjin Kim <kgene.kim@samsung.com>, Kukjin Kim <kgene@kernel.org>,
Viresh Kumar <viresh.kumar@linaro.org>,
Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Tomasz Figa <tomasz.figa@gmail.com>,
Lukasz Majewski <l.majewski@samsung.com>,
Heiko Stuebner <heiko@sntech.de>,
Chanwoo Choi <cw00.choi@samsung.com>,
Kevin Hilman <khilman@linaro.org>,
Javier Martinez Canillas <javier@dowhile0.org>,
Tobias Jakobi <tjakobi@math.uni-bielefeld.de>,
Anand Moon <linux.amoon@gmail.com>,
linux-samsung-soc@vger.kernel.org, linux-clk@vger.kernel.org,
linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 0/5] cpufreq: use generic cpufreq drivers for Exynos4x12 platform
Date: Mon, 03 Aug 2015 22:55:00 +0200 [thread overview]
Message-ID: <55BFD524.6080102@math.uni-bielefeld.de> (raw)
In-Reply-To: <1438368557-2352-1-git-send-email-b.zolnierkie@samsung.com>
Hello,
Bartlomiej Zolnierkiewicz wrote:
> Hi,
>
> This patch series removes the use of Exynos4x12 specific support
> from cpufreq-exynos driver and enables the use of cpufreq-dt driver
> for this platform.
>
> This patch series has been tested on Exynos4412 based Odroid-U3 and
> Trats2 boards.
I've tested this series on my Odroid-X2 (also Exynos4412) with
powersave, performance and ondemand governor. Scaling works like
expected, so no issues to report!
Tested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
With best wishes,
Tobias
>
> Depends on:
> - next-20150730 branch of linux-next kernel tree
> - "[PATCH V3 00/16] OPP: Add code to support operating-points-v2 bindings"
> (http://www.spinics.net/lists/arm-kernel/msg435408.html)
>
> Changes since v2
> (http://thread.gmane.org/gmane.linux.kernel.samsung-soc/46653):
> - rebased on top of next-20150730 branch of linux-next kernel tree
> - ported over V3 of opp-v2 bindings support patch series
> - put cpu0 nodes in alphabetical order in dts files
> - added Reviewed-by tags from Javier and Krzysztof
> - added Acked-by tag from Sylwester
>
> Changes since v1
> (http://thread.gmane.org/gmane.linux.kernel.samsung-soc/44361):
> - rebased on top of next-20150629 branch of linux-next kernel tree
> - rebased on top of Exynos5250 cpufreq-dt support patch series
> - fixed if-statement in exynos4_clk_init() (noticed by Tobias Jakobi)
> - ported over opp-v2 bindings (requested by Viresh Kumar)
>
> Best regards,
> --
> Bartlomiej Zolnierkiewicz
> Samsung R&D Institute Poland
> Samsung Electronics
>
>
> Bartlomiej Zolnierkiewicz (5):
> clk: samsung: exynos4x12: add cpu clock configuration data and
> instantiate cpu clock
> ARM: dts: Exynos4x12: add CPU OPP and regulator supply property
> ARM: Exynos: switch to using generic cpufreq driver for Exynos4x12
> cpufreq: exynos: remove Exynos4x12 specific cpufreq driver support
> cpufreq: remove no longer needed CPU_FREQ_BOOST_SW config option
>
> arch/arm/boot/dts/exynos4212.dtsi | 81 ++++++++
> arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 4 +
> arch/arm/boot/dts/exynos4412-origen.dts | 4 +
> arch/arm/boot/dts/exynos4412-trats2.dts | 4 +
> arch/arm/boot/dts/exynos4412.dtsi | 83 +++++++++
> arch/arm/mach-exynos/exynos.c | 2 +
> drivers/clk/samsung/clk-exynos4.c | 50 +++++
> drivers/cpufreq/Kconfig | 5 +-
> drivers/cpufreq/Kconfig.arm | 38 ----
> drivers/cpufreq/Makefile | 2 -
> drivers/cpufreq/exynos-cpufreq.c | 236 ------------------------
> drivers/cpufreq/exynos-cpufreq.h | 72 --------
> drivers/cpufreq/exynos4x12-cpufreq.c | 236 ------------------------
> drivers/cpufreq/freq_table.c | 2 -
> 14 files changed, 229 insertions(+), 590 deletions(-)
> delete mode 100644 drivers/cpufreq/exynos-cpufreq.c
> delete mode 100644 drivers/cpufreq/exynos-cpufreq.h
> delete mode 100644 drivers/cpufreq/exynos4x12-cpufreq.c
>
WARNING: multiple messages have this Message-ID (diff)
From: tjakobi@math.uni-bielefeld.de (Tobias Jakobi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/5] cpufreq: use generic cpufreq drivers for Exynos4x12 platform
Date: Mon, 03 Aug 2015 22:55:00 +0200 [thread overview]
Message-ID: <55BFD524.6080102@math.uni-bielefeld.de> (raw)
In-Reply-To: <1438368557-2352-1-git-send-email-b.zolnierkie@samsung.com>
Hello,
Bartlomiej Zolnierkiewicz wrote:
> Hi,
>
> This patch series removes the use of Exynos4x12 specific support
> from cpufreq-exynos driver and enables the use of cpufreq-dt driver
> for this platform.
>
> This patch series has been tested on Exynos4412 based Odroid-U3 and
> Trats2 boards.
I've tested this series on my Odroid-X2 (also Exynos4412) with
powersave, performance and ondemand governor. Scaling works like
expected, so no issues to report!
Tested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
With best wishes,
Tobias
>
> Depends on:
> - next-20150730 branch of linux-next kernel tree
> - "[PATCH V3 00/16] OPP: Add code to support operating-points-v2 bindings"
> (http://www.spinics.net/lists/arm-kernel/msg435408.html)
>
> Changes since v2
> (http://thread.gmane.org/gmane.linux.kernel.samsung-soc/46653):
> - rebased on top of next-20150730 branch of linux-next kernel tree
> - ported over V3 of opp-v2 bindings support patch series
> - put cpu0 nodes in alphabetical order in dts files
> - added Reviewed-by tags from Javier and Krzysztof
> - added Acked-by tag from Sylwester
>
> Changes since v1
> (http://thread.gmane.org/gmane.linux.kernel.samsung-soc/44361):
> - rebased on top of next-20150629 branch of linux-next kernel tree
> - rebased on top of Exynos5250 cpufreq-dt support patch series
> - fixed if-statement in exynos4_clk_init() (noticed by Tobias Jakobi)
> - ported over opp-v2 bindings (requested by Viresh Kumar)
>
> Best regards,
> --
> Bartlomiej Zolnierkiewicz
> Samsung R&D Institute Poland
> Samsung Electronics
>
>
> Bartlomiej Zolnierkiewicz (5):
> clk: samsung: exynos4x12: add cpu clock configuration data and
> instantiate cpu clock
> ARM: dts: Exynos4x12: add CPU OPP and regulator supply property
> ARM: Exynos: switch to using generic cpufreq driver for Exynos4x12
> cpufreq: exynos: remove Exynos4x12 specific cpufreq driver support
> cpufreq: remove no longer needed CPU_FREQ_BOOST_SW config option
>
> arch/arm/boot/dts/exynos4212.dtsi | 81 ++++++++
> arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 4 +
> arch/arm/boot/dts/exynos4412-origen.dts | 4 +
> arch/arm/boot/dts/exynos4412-trats2.dts | 4 +
> arch/arm/boot/dts/exynos4412.dtsi | 83 +++++++++
> arch/arm/mach-exynos/exynos.c | 2 +
> drivers/clk/samsung/clk-exynos4.c | 50 +++++
> drivers/cpufreq/Kconfig | 5 +-
> drivers/cpufreq/Kconfig.arm | 38 ----
> drivers/cpufreq/Makefile | 2 -
> drivers/cpufreq/exynos-cpufreq.c | 236 ------------------------
> drivers/cpufreq/exynos-cpufreq.h | 72 --------
> drivers/cpufreq/exynos4x12-cpufreq.c | 236 ------------------------
> drivers/cpufreq/freq_table.c | 2 -
> 14 files changed, 229 insertions(+), 590 deletions(-)
> delete mode 100644 drivers/cpufreq/exynos-cpufreq.c
> delete mode 100644 drivers/cpufreq/exynos-cpufreq.h
> delete mode 100644 drivers/cpufreq/exynos4x12-cpufreq.c
>
next prev parent reply other threads:[~2015-08-03 20:55 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-31 18:49 [PATCH v3 0/5] cpufreq: use generic cpufreq drivers for Exynos4x12 platform Bartlomiej Zolnierkiewicz
2015-07-31 18:49 ` Bartlomiej Zolnierkiewicz
2015-07-31 18:49 ` [PATCH v3 1/5] clk: samsung: exynos4x12: add cpu clock configuration data and instantiate cpu clock Bartlomiej Zolnierkiewicz
2015-07-31 18:49 ` Bartlomiej Zolnierkiewicz
2015-07-31 18:49 ` [PATCH v3 2/5] ARM: dts: Exynos4x12: add CPU OPP and regulator supply property Bartlomiej Zolnierkiewicz
2015-07-31 18:49 ` Bartlomiej Zolnierkiewicz
2015-08-01 10:48 ` Viresh Kumar
2015-08-01 10:48 ` Viresh Kumar
2015-07-31 18:49 ` [PATCH v3 3/5] ARM: Exynos: switch to using generic cpufreq driver for Exynos4x12 Bartlomiej Zolnierkiewicz
2015-07-31 18:49 ` Bartlomiej Zolnierkiewicz
2015-08-01 7:43 ` Krzysztof Kozlowski
2015-08-01 7:43 ` Krzysztof Kozlowski
2015-08-03 10:31 ` Bartlomiej Zolnierkiewicz
2015-08-03 10:31 ` Bartlomiej Zolnierkiewicz
2015-08-01 11:17 ` Viresh Kumar
2015-08-01 11:17 ` Viresh Kumar
2015-08-03 10:17 ` Bartlomiej Zolnierkiewicz
2015-08-03 10:17 ` Bartlomiej Zolnierkiewicz
2015-08-03 10:29 ` Viresh Kumar
2015-08-03 10:29 ` Viresh Kumar
2015-08-03 10:36 ` Bartlomiej Zolnierkiewicz
2015-08-03 10:36 ` Bartlomiej Zolnierkiewicz
2015-08-03 10:40 ` Viresh Kumar
2015-08-03 10:40 ` Viresh Kumar
2015-08-03 10:47 ` Bartlomiej Zolnierkiewicz
2015-08-03 10:47 ` Bartlomiej Zolnierkiewicz
2015-08-03 11:15 ` Krzysztof Kozlowski
2015-08-03 11:15 ` Krzysztof Kozlowski
2015-08-03 13:55 ` Bartlomiej Zolnierkiewicz
2015-08-03 13:55 ` Bartlomiej Zolnierkiewicz
2015-08-03 15:50 ` Viresh Kumar
2015-08-03 15:50 ` Viresh Kumar
2015-08-03 15:57 ` Bartlomiej Zolnierkiewicz
2015-08-03 15:57 ` Bartlomiej Zolnierkiewicz
2015-08-04 0:43 ` Krzysztof Kozlowski
2015-08-04 0:43 ` Krzysztof Kozlowski
2015-07-31 18:49 ` [PATCH v3 4/5] cpufreq: exynos: remove Exynos4x12 specific cpufreq driver support Bartlomiej Zolnierkiewicz
2015-07-31 18:49 ` Bartlomiej Zolnierkiewicz
2015-08-01 10:50 ` Viresh Kumar
2015-08-01 10:50 ` Viresh Kumar
2015-07-31 18:49 ` [PATCH v3 5/5] cpufreq: remove no longer needed CPU_FREQ_BOOST_SW config option Bartlomiej Zolnierkiewicz
2015-07-31 18:49 ` Bartlomiej Zolnierkiewicz
2015-08-01 11:15 ` Viresh Kumar
2015-08-01 11:15 ` Viresh Kumar
2015-08-03 17:12 ` Pandruvada, Srinivas
2015-08-03 17:12 ` Pandruvada, Srinivas
2015-08-03 17:12 ` Pandruvada, Srinivas
2015-08-03 17:12 ` Pandruvada, Srinivas
2015-08-04 1:09 ` Rafael J. Wysocki
2015-08-04 1:09 ` Rafael J. Wysocki
2015-08-03 20:55 ` Tobias Jakobi [this message]
2015-08-03 20:55 ` [PATCH v3 0/5] cpufreq: use generic cpufreq drivers for Exynos4x12 platform Tobias Jakobi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55BFD524.6080102@math.uni-bielefeld.de \
--to=tjakobi@math.uni-bielefeld.de \
--cc=b.zolnierkie@samsung.com \
--cc=cw00.choi@samsung.com \
--cc=heiko@sntech.de \
--cc=javier@dowhile0.org \
--cc=k.kozlowski@samsung.com \
--cc=kgene.kim@samsung.com \
--cc=kgene@kernel.org \
--cc=khilman@linaro.org \
--cc=l.majewski@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux.amoon@gmail.com \
--cc=mturquette@baylibre.com \
--cc=s.nawrocki@samsung.com \
--cc=thomas.ab@samsung.com \
--cc=tomasz.figa@gmail.com \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.