Re: [PATCH 07/10] ARM: dts: OMAP5: Use "syscon-phy-power" instead of "ctrl-module" in USB PHY node

[Roger Quadros <rogerq@ti.com>]

On 04/08/15 18:30, Kishon Vijay Abraham I wrote:
> Add "syscon-phy-power" property and remove the deprecated "ctrl-module"
> property from USB PHY devicetree node.
> 
> Since "omap_control_usb2phy" and "omap_control_usb3phy" devicetree nodes
> are no longer used, remove it.
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

Acked-by: Roger Quadros <rogerq@ti.com>

cheers,
-roger

> ---
>  arch/arm/boot/dts/omap5.dtsi |   16 ++--------------
>  1 file changed, 2 insertions(+), 14 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
> index c8fd648..f0b6cd6 100644
> --- a/arch/arm/boot/dts/omap5.dtsi
> +++ b/arch/arm/boot/dts/omap5.dtsi
> @@ -848,18 +848,6 @@
>  			hw-caps-temp-alert;
>  		};
>  
> -		omap_control_usb2phy: control-phy@4a002300 {
> -			compatible = "ti,control-phy-usb2";
> -			reg = <0x4a002300 0x4>;
> -			reg-names = "power";
> -		};
> -
> -		omap_control_usb3phy: control-phy@4a002370 {
> -			compatible = "ti,control-phy-pipe3";
> -			reg = <0x4a002370 0x4>;
> -			reg-names = "power";
> -		};
> -
>  		usb3: omap_dwc3@4a020000 {
>  			compatible = "ti,dwc3";
>  			ti,hwmods = "usb_otg_ss";
> @@ -890,7 +878,7 @@
>  			usb2_phy: usb2phy@4a084000 {
>  				compatible = "ti,omap-usb2";
>  				reg = <0x4a084000 0x7c>;
> -				ctrl-module = <&omap_control_usb2phy>;
> +				syscon-phy-power = <&scm_conf 0x300>;
>  				clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>;
>  				clock-names = "wkupclk", "refclk";
>  				#phy-cells = <0>;
> @@ -902,7 +890,7 @@
>  				      <0x4a084800 0x64>,
>  				      <0x4a084c00 0x40>;
>  				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
> -				ctrl-module = <&omap_control_usb3phy>;
> +				syscon-phy-power = <&scm_conf 0x370>;
>  				clocks = <&usb_phy_cm_clk32k>,
>  					 <&sys_clkin>,
>  					 <&usb_otg_ss_refclk960m>;
>