Repeatable crash of CT firmware (at least).

[Ben Greear <greearb@candelatech.com>]

In case someone has time an interest, I would be curious if upstream
firmware/kernels see this problem.  Unfortunately, it takes a bit of
setup to do this test (namely, constant tx source, and if doing this with
something like ath9k, then you might need a variable attenuator).

Possibly just a very loud constant tx source would reproduce the bug
as well, and possibly it would happen in AP mode, etc.

Channel 1, HT40

Configure ath10k in station mode, associate with ath10k AP,
start transmitting frames (about 4kpps tx, 1kpps rx in my case)

Add a constant-transmit noise source at around -65 db on the same channel.  This should
cause ath10k station (and AP) to go silent.

Shortly after, the station system's ath10k firmware crashes due to assert
in the firmware CE logic.

I know that a similar CE assert can happen if the host does bad things
with the tx descriptors, so I am suspicious that is the case here.  For instance,
maybe firmware is still trying to transmit the frame when host tears down
the station vdev??

Of course, this could all be due to bugs in CT firmware and/or my kernel
patches...

Thanks,
Ben

-- 
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc  http://www.candelatech.com


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k