From: "Toralf Förster" <toralf.foerster@gmx.de>
To: ibm-acpi-devel@lists.sourceforge.net
Cc: Linux Kernel <linux-kernel@vger.kernel.org>
Subject: Regression 4.0.8->4.1.3 : power button doesn't produce an ACPI event
Date: Mon, 10 Aug 2015 15:32:03 +0200 [thread overview]
Message-ID: <55C8A7D3.1030301@gmx.de> (raw)
[-- Attachment #1: Type: text/plain, Size: 197 bytes --]
This happen at a docked 64 bit Gentoo linux (hardened, but that's not the culprit AFAICS) at a ThinkPad T440s. I attached the dmesg of both kernel versions.
--
Toralf, pgp key: 872AE508 0076E94E
[-- Attachment #2: dmesg-4.0.8-hardened --]
[-- Type: text/plain, Size: 55245 bytes --]
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.0.8-hardened (root@t44) (gcc version 4.8.4 (Gentoo Hardened 4.8.4 p1.6, pie-0.6.1) ) #1 SMP Mon Jul 13 11:24:54 CEST 2015
Command line: BOOT_IMAGE=/boot/vmlinuz-4.0.8-hardened root=/dev/sda3 ro init 3 vga=791
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000ae114fff] usable
BIOS-e820: [mem 0x00000000ae115000-0x00000000bb84cfff] reserved
BIOS-e820: [mem 0x00000000bb84d000-0x00000000bb89cfff] ACPI NVS
BIOS-e820: [mem 0x00000000bb89d000-0x00000000bcc73fff] reserved
BIOS-e820: [mem 0x00000000bcc74000-0x00000000bce7efff] ACPI NVS
BIOS-e820: [mem 0x00000000bce7f000-0x00000000bcefefff] ACPI data
BIOS-e820: [mem 0x00000000bceff000-0x00000000bf9fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000033e5fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: LENOVO 20AQCTO1WW/20AQCTO1WW, BIOS GJET83WW (2.33 ) 03/09/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x33e600 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00BE000000 mask 7FFE000000 uncachable
2 base 00BD000000 mask 7FFF000000 uncachable
3 base 00BCF00000 mask 7FFFF00000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
e820: last_pfn = 0xae115 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01e5b000, 0x01e5bfff] PGTABLE
init_memory_mapping: [mem 0x33e400000-0x33e5fffff]
[mem 0x33e400000-0x33e5fffff] page 2M
BRK [0x01e5c000, 0x01e5cfff] PGTABLE
init_memory_mapping: [mem 0x320000000-0x33e3fffff]
[mem 0x320000000-0x33e3fffff] page 2M
init_memory_mapping: [mem 0x300000000-0x31fffffff]
[mem 0x300000000-0x31fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xae114fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0xadffffff] page 2M
[mem 0xae000000-0xae114fff] page 4k
init_memory_mapping: [mem 0x100000000-0x2ffffffff]
[mem 0x100000000-0x2ffffffff] page 1G
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000BCEFE170 0000E4 (v01 LENOVO TP-GJ 00002330 PTEC 00000002)
ACPI: FACP 0x00000000BCEF9000 00010C (v05 LENOVO TP-GJ 00002330 PTEC 00000002)
ACPI: DSDT 0x00000000BCEE3000 010F2D (v01 LENOVO TP-GJ 00002330 INTL 20120711)
ACPI: FACS 0x00000000BCD7A000 000040
ACPI: DBGP 0x00000000BCEFC000 000034 (v01 LENOVO TP-GJ 00002330 PTEC 00000002)
ACPI: ECDT 0x00000000BCEFB000 000052 (v01 LENOVO TP-GJ 00002330 PTEC 00000002)
ACPI: HPET 0x00000000BCEF8000 000038 (v01 LENOVO TP-GJ 00002330 PTEC 00000002)
ACPI: APIC 0x00000000BCEF7000 000098 (v01 LENOVO TP-GJ 00002330 PTEC 00000002)
ACPI: MCFG 0x00000000BCEF6000 00003C (v01 LENOVO TP-GJ 00002330 PTEC 00000002)
ACPI: SSDT 0x00000000BCEF5000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20120711)
ACPI: SSDT 0x00000000BCEF4000 000486 (v01 LENOVO TP-SSDT2 00000200 INTL 20120711)
ACPI: SSDT 0x00000000BCEE2000 0009CB (v01 LENOVO SataAhci 00001000 INTL 20120711)
ACPI: SSDT 0x00000000BCEE1000 000152 (v01 LENOVO Rmv_Batt 00001000 INTL 20120711)
ACPI: SSDT 0x00000000BCEE0000 0007F5 (v01 LENOVO Cpu0Ist 00003000 INTL 20120711)
ACPI: SSDT 0x00000000BCEDF000 000AD8 (v01 LENOVO CpuPm 00003000 INTL 20120711)
ACPI: SSDT 0x00000000BCEDD000 00125C (v01 LENOVO SaSsdt 00003000 INTL 20120711)
ACPI: SSDT 0x00000000BCEDC000 000379 (v01 LENOVO CppcTabl 00001000 INTL 20120711)
ACPI: PCCT 0x00000000BCEDB000 00006E (v05 LENOVO TP-GJ 00002330 PTEC 00000002)
ACPI: SSDT 0x00000000BCEDA000 000AC4 (v01 LENOVO Cpc_Tabl 00001000 INTL 20120711)
ACPI: TCPA 0x00000000BCED9000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001)
ACPI: UEFI 0x00000000BCED8000 000042 (v01 LENOVO TP-GJ 00002330 PTEC 00000002)
ACPI: MSDM 0x00000000BCCC2000 000055 (v03 LENOVO TP-GJ 00002330 PTEC 00000002)
ACPI: ASF! 0x00000000BCEFD000 0000A5 (v32 LENOVO TP-GJ 00002330 PTEC 00000002)
ACPI: BATB 0x00000000BCED7000 000046 (v01 LENOVO TP-GJ 00002330 PTEC 00000002)
ACPI: FPDT 0x00000000BCED6000 000064 (v01 LENOVO TP-GJ 00002330 PTEC 00000002)
ACPI: UEFI 0x00000000BCED5000 0002F6 (v01 LENOVO TP-GJ 00002330 PTEC 00000002)
ACPI: DMAR 0x00000000BCED4000 0000B0 (v01 LENOVO TP-GJ 00002330 PTEC 00000002)
ACPI: Local APIC address 0xfee00000
[ffffea0000000000-ffffea000cffffff] PMD -> [ffff880332000000-ffff88033dbfffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000033e5fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x00000000ae114fff]
node 0: [mem 0x0000000100000000-0x000000033e5fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000033e5fffff]
On node 0 totalpages: 3065521
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 11077 pages used for memmap
DMA32 zone: 708885 pages, LIFO batch:31
Normal zone: 36760 pages used for memmap
Normal zone: 2352640 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xbda00000-0xbf9fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: 8 Processors exceeds NR_CPUS limit of 4
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xae115000-0xbb84cfff]
PM: Registered nosave memory: [mem 0xbb84d000-0xbb89cfff]
PM: Registered nosave memory: [mem 0xbb89d000-0xbcc73fff]
PM: Registered nosave memory: [mem 0xbcc74000-0xbce7efff]
PM: Registered nosave memory: [mem 0xbce7f000-0xbcefefff]
PM: Registered nosave memory: [mem 0xbceff000-0xbf9fffff]
PM: Registered nosave memory: [mem 0xbfa00000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfe100fff]
PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
PM: Registered nosave memory: [mem 0xfe113000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices
setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88033e200000 s71144 r8192 d31256 u524288
pcpu-alloc: s71144 r8192 d31256 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3017599
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.0.8-hardened root=/dev/sda3 ro init 3 vga=791
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
Memory: 11963424K/12262084K available (5766K kernel code, 658K rwdata, 2800K rodata, 1312K init, 1068K bss, 298660K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
CONFIG_RCU_FANOUT set to non-default value of 32
Additional per-CPU info printed with stalls.
NR_IRQS:4352 nr_irqs:728 16
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2494.151 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.30 BogoMIPS (lpj=2494151)
pid_max: default: 32768 minimum: 501
ACPI: Core revision 20150204
ACPI: All ACPI Tables successfully acquired
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
PAX: PCID detected
PAX: strong UDEREF enabled
PAX: INVPCID detected
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 28K (ffffffff81d48000 - ffffffff81d4f000)
ftrace: allocating 19342 entries in 76 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i5-4300U CPU @ 1.90GHz (fam: 06, model: 45, stepping: 01)
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
PAX: PCID detected
PAX: strong UDEREF enabled
PAX: INVPCID detected
#2
PAX: PCID detected
PAX: strong UDEREF enabled
PAX: INVPCID detected
#3
PAX: PCID detected
PAX: strong UDEREF enabled
PAX: INVPCID detected
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (19953.20 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xbb84d000-0xbb89cfff] (327680 bytes)
PM: Registering ACPI NVS region [mem 0xbcc74000-0xbce7efff] (2142208 bytes)
xor: automatically using best checksumming function:
avx : 15528.000 MB/sec
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
raid6: sse2x1 5773 MB/s
raid6: sse2x2 7167 MB/s
raid6: sse2x4 8390 MB/s
raid6: avx2x1 11125 MB/s
raid6: avx2x2 12750 MB/s
raid6: avx2x4 14992 MB/s
raid6: using algorithm avx2x4 (14992 MB/s)
raid6: using avx2x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI : EC: EC description table is found, configuring boot EC
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880330038000 000436 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880330038800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880330026000 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PUBS] (on)
acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
ACPI: Power Resource [NVP3] (on)
ACPI: Power Resource [NVP2] (on)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 9 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3f]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfebfffff window]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window]
pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xe0630000-0xe0633fff 64bit]
pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xe0620000-0xe062ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xe0639000-0xe063901f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:155a] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xe0600000-0xe061ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xe063e000-0xe063efff]
pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xe0634000-0xe0637fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:9c1a] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: Enabling MPC IRBNCE
pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
pci 0000:00:1c.1: [8086:9c14] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: Enabling MPC IRBNCE
pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xe063d000-0xe063d3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af]
pci 0000:00:1f.2: reg 0x14: [io 0x30b4-0x30b7]
pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7]
pci 0000:00:1f.2: reg 0x1c: [io 0x30b0-0x30b3]
pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
pci 0000:00:1f.2: reg 0x24: [mem 0xe063c000-0xe063c7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xe0638000-0xe06380ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000
pci 0000:02:00.0: reg 0x10: [mem 0xe0500000-0xe0500fff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xe0500000-0xe05fffff]
pci 0000:03:00.0: [8086:08b2] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xe0400000-0xe0401fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xe0400000-0xe04fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: Enabled 4 GPEs in block 00 to 7F
ACPI : EC: GPE = 0x25, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
e820: reserve RAM buffer [mem 0xae115000-0xafffffff]
e820: reserve RAM buffer [mem 0x33e600000-0x33fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0xbf9fffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x1800-0x189f] could not be reserved
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: [io 0x0880-0x08ff] has been reserved
system 00:01: [io 0x0900-0x097f] has been reserved
system 00:01: [io 0x0980-0x09ff] has been reserved
system 00:01: [io 0x0a00-0x0a7f] has been reserved
system 00:01: [io 0x0a80-0x0aff] has been reserved
system 00:01: [io 0x0b00-0x0b7f] has been reserved
system 00:01: [io 0x0b80-0x0bff] has been reserved
system 00:01: [io 0x15e0-0x15ef] has been reserved
system 00:01: [io 0x1600-0x167f] has been reserved
system 00:01: [io 0x1640-0x165f] has been reserved
system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:01: [mem 0x00000000-0x00000fff] could not be reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs LEN0036 PNP0f13 (active)
pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
pnp: PnP ACPI: found 6 devices
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xe0500000-0xe05fffff]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xe0400000-0xe04fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfebfffff window]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window]
pci_bus 0000:02: resource 1 [mem 0xe0500000-0xe05fffff]
pci_bus 0000:03: resource 1 [mem 0xe0400000-0xe04fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 7, 786432 bytes)
UDP-Lite hash table entries: 8192 (order: 7, 786432 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
dmar: Host address width 39
dmar: DRHD base: 0x000000fed90000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
dmar: DRHD base: 0x000000fed91000 flags: 0x1
dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
dmar: RMRR base: 0x000000badca000 end: 0x000000bade0fff
dmar: RMRR base: 0x000000bd800000 end: 0x000000bf9fffff
DMAR: No ATSR found
IOMMU: dmar0 using Queued invalidation
IOMMU: dmar1 using Queued invalidation
IOMMU: Setting RMRR:
IOMMU: Setting identity map for device 0000:00:02.0 [0xbd800000 - 0xbf9fffff]
IOMMU: Setting identity map for device 0000:00:14.0 [0xbadca000 - 0xbade0fff]
IOMMU: Setting identity map for device 0000:00:1d.0 [0xbadca000 - 0xbade0fff]
IOMMU: Prepare 0-16MiB unity mapping for LPC
IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1438265529.268:1): initialized
page_owner is disabled
zpool: loaded
zbud: loaded
cryptomgr_test (37) used greatest stack depth: 14280 bytes left
cryptomgr_test (38) used greatest stack depth: 14200 bytes left
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler cfq registered (default)
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4 model 0x45
intel_idle: lapic_timer_reliable_states 0xffffffff
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
ata1: SATA max UDMA/133 abar m2048@0xe063c000 port 0xe063c100 irq 42
ata2: DUMMY
ata3: DUMMY
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 0 bytes nvram, hpet irqs
Intel P-state driver initializing.
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
Key type dns_resolver registered
registered taskstats version 1
Btrfs loaded
rtc_cmos 00:02: setting system clock to 2015-07-30 14:12:09 UTC (1438265529)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: ATA-10: INTEL SSDSC2BF240A5L, LTVi, max UDMA/133
ata1.00: 468862128 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2BF24 LTVi PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
BTRFS: device fsid 3ac03d1d-c85f-4bf4-9c62-a0e05b23fa8d devid 1 transid 181972 /dev/root
BTRFS info (device sda3): disk space caching is enabled
BTRFS: detected SSD devices, enabling SSD mode
VFS: Mounted root (btrfs filesystem) readonly on device 0:14.
devtmpfs: mounted
Freeing unused kernel memory: 1312K (ffffffff81c00000 - ffffffff81d48000)
setfont (90) used greatest stack depth: 8 bytes left
systemd-udevd[294]: starting version 216
random: systemd-udevd urandom read with 12 bits of entropy available
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
Linux agpgart interface v0.103
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (51 C)
rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 44
ACPI: AC Adapter [AC] (on-line)
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
[drm] Initialized drm 1.1.0 20060810
Non-volatile memory driver v1.3
thinkpad_acpi: ThinkPad ACPI Extras v0.25
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS GJET83WW (2.33 ), EC unknown
thinkpad_acpi: Lenovo ThinkPad T440s, model 20AQCTO1WW
thinkpad_acpi: Unsupported brightness interface, please contact ibm-acpi-devel@lists.sourceforge.net
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
ACPI: Battery Slot [BAT0] (battery present)
tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
ACPI: Battery Slot [BAT1] (battery present)
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input3
wmi: Mapper loaded
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
cfg80211: Calling CRDA to update world regulatory domain
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2014 Intel Corporation
iwlwifi 0000:03:00.0: loaded firmware version 25.15.12.0 op_mode iwlmvm
tpm_tis 00:05: TPM is disabled/deactivated (0x6)
iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
input: PC Speaker as /devices/platform/pcspkr/input/input4
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
tsc: Refined TSC clocksource calibration: 2494.226 MHz
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
systemd-udevd[312]: renamed network interface wlan0 to wlp3s0
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 68:f7:28:0e:15:45
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 1000FF-0FF
snd_hda_intel: probe of 0000:00:03.0 failed with error -2
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000b810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.0.8-hardened xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 9 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.0.8-hardened xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xe063d000
e1000e 0000:00:19.0 enp0s25: renamed from eth0
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 4.0.8-hardened ehci_hcd
usb usb3: SerialNumber: 0000:00:1d.0
sound hdaudioC0D0: autoconfig for ID 292: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Mic=0x1a
sound hdaudioC0D0: Internal Mic=0x12
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
[drm] Memory usable by graphics device = 2048M
[drm] VT-d active for gfx access
[drm] Replacing VGA console driver
systemd-udevd[312]: renamed network interface eth0 to enp0s25
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] DMAR active, disabling use of stolen memory
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[drm] Initialized i915 1.6.0 20150130 for 0000:00:02.0 on minor 0
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
fbcon: inteldrmfb (fb0) is primary device
usb 2-3: new SuperSpeed USB device number 2 using xhci_hcd
usb 3-1: new high-speed USB device number 2 using ehci-pci
usb 2-3: New USB device found, idVendor=17ef, idProduct=1010
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3: Product: Lenovo ThinkPad Dock
usb 2-3: Manufacturer: LENOVO
hub 2-3:1.0: USB hub found
hub 2-3:1.0: 4 ports detected
usb 1-3: new high-speed USB device number 2 using xhci_hcd
usb 3-1: New USB device found, idVendor=8087, idProduct=8000
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 8 ports detected
usb 1-3: New USB device found, idVendor=17ef, idProduct=1010
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3: Product: Lenovo ThinkPad Dock
usb 1-3: Manufacturer: LENOVO
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 4 ports detected
psmouse serio1: synaptics: queried max coordinates: x [..5674], y [..4684]
psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1170..]
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x12e800, board id: 2962, fw id: 2560
psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
usb 1-3.1: new full-speed USB device number 3 using xhci_hcd
Switched to clocksource tsc
usb 1-3.1: New USB device found, idVendor=043d, idProduct=0078
usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3.1: Product: Lexmark Z600 Series
usb 1-3.1: Manufacturer: Lexmark
usb 1-3.1: SerialNumber: 18K670127065550
usb 1-3.2: new high-speed USB device number 4 using xhci_hcd
usb 1-3.2: New USB device found, idVendor=0ccd, idProduct=00ab
usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3.2: Product: Cinergy T XXS
usb 1-3.2: Manufacturer: TerraTec GmbH
usb 1-3.2: SerialNumber: 0000000001
usb 1-3.4: new high-speed USB device number 5 using xhci_hcd
Console: switching to colour frame buffer device 240x67
usb 1-3.4: New USB device found, idVendor=17ef, idProduct=100f
usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3.4: Product: Lenovo ThinkPad Dock
usb 1-3.4: Manufacturer: Lenovo
usb 1-3.4: SerialNumber: Rev1.2
hub 1-3.4:1.0: USB hub found
hub 1-3.4:1.0: 3 ports detected
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
usblp 1-3.1:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x043D pid 0x0078
usbcore: registered new interface driver usblp
dvb-usb: found a 'Terratec Cinergy T USB XXS (HD)/ T3' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
dib0700: firmware started successfully.
usb 1-3.4.2: new high-speed USB device number 6 using xhci_hcd
usb 1-3.4.2: New USB device found, idVendor=05e3, idProduct=0608
usb 1-3.4.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-3.4.2: Product: USB2.0 Hub
hub 1-3.4.2:1.0: USB hub found
hub 1-3.4.2:1.0: 4 ports detected
dvb-usb: found a 'Terratec Cinergy T USB XXS (HD)/ T3' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Terratec Cinergy T USB XXS (HD)/ T3)
usb 1-3.4.2.3: new low-speed USB device number 7 using xhci_hcd
usb 1-3.4.2.3: New USB device found, idVendor=046d, idProduct=c062
usb 1-3.4.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3.4.2.3: Product: USB Laser Mouse
usb 1-3.4.2.3: Manufacturer: Logitech
usb 1-3.4.2.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-3.2: DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
usb 1-3.4.2.4: new low-speed USB device number 8 using xhci_hcd
usb 1-3.4.2.4: New USB device found, idVendor=046a, idProduct=0023
usb 1-3.4.2.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-3.4.2.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-3.4.2.4: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4.2/1-3.4.2.3/1-3.4.2.3:1.0/0003:046D:C062.0001/input/input12
hid-generic 0003:046D:C062.0001: input: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:14.0-3.4.2.3/input0
input: HID 046a:0023 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4.2/1-3.4.2.4/1-3.4.2.4:1.0/0003:046A:0023.0002/input/input13
cherry 0003:046A:0023.0002: input: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:14.0-3.4.2.4/input0
input: HID 046a:0023 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4.2/1-3.4.2.4/1-3.4.2.4:1.1/0003:046A:0023.0003/input/input14
DiB0070: successfully identified
cherry 0003:046A:0023.0003: input: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:14.0-3.4.2.4/input1
Registered IR keymap rc-dib0700-rc5
input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/rc/rc0/input15
rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/rc/rc0
dvb-usb: schedule remote query interval to 50 msecs.
dvb-usb: Terratec Cinergy T USB XXS (HD)/ T3 successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_dib0700
grsec: time set by /sbin/hwclock[hwclock:416] uid/euid:0/0 gid/egid:0/0, parent /lib64/rc/sh/openrc-run.sh[openrc-run.sh:415] uid/euid:0/0 gid/egid:0/0
grsec: time set by /sbin/hwclock[hwclock:416] uid/euid:0/0 gid/egid:0/0, parent /lib64/rc/sh/openrc-run.sh[openrc-run.sh:415] uid/euid:0/0 gid/egid:0/0
grsec: time set by /sbin/hwclock[hwclock:418] uid/euid:0/0 gid/egid:0/0, parent /lib64/rc/sh/openrc-run.sh[openrc-run.sh:417] uid/euid:0/0 gid/egid:0/0
BTRFS info (device sda3): turning on discard
BTRFS info (device sda3): use spread ssd allocation scheme
BTRFS info (device sda3): disk space caching is enabled
microcode: Microcode Update Driver: v2.00 removed.
psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
IPv6: ADDRCONF(NETDEV_UP): tap0: link is not ready
random: nonblocking pool is initialized
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input11
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
device tap0 entered promiscuous mode
device br0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
NET: Registered protocol family 17
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
wlp3s0: authenticate with 08:96:d7:05:f9:2a
wlp3s0: send auth to 08:96:d7:05:f9:2a (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 08:96:d7:05:f9:2a (try 1/3)
wlp3s0: RX AssocResp from 08:96:d7:05:f9:2a (capab=0x431 status=0 aid=1)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
cfg80211: Calling CRDA for country: DE
cfg80211: Regulatory domain changed to country: DE
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
grsec: time set by /usr/sbin/ntpd[ntpd:2291] uid/euid:0/0 gid/egid:0/0, parent /sbin/init[init:1] uid/euid:0/0 gid/egid:0/0
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period (net ffffffff81a806c0)
ip_tables: (C) 2000-2006 Netfilter Core Team
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
dvb-usb: Terratec Cinergy T USB XXS (HD)/ T3 successfully deinitialized and disconnected.
wlp3s0: deauthenticating from 08:96:d7:05:f9:2a by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
[drm:ffffffffc052b95a] *ERROR* Hangcheck timer elapsed... bsd ring idle
[drm:ffffffffc052b95a] *ERROR* Hangcheck timer elapsed... video enhancement ring idle
PM: suspend of devices complete after 7834.818 msecs
PM: late suspend of devices complete after 16.964 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 13.371 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
intel_pstate CPU 1 exiting
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
intel_pstate CPU 2 exiting
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
intel_pstate CPU 3 exiting
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
PAX: PCID detected
PAX: strong UDEREF enabled
PAX: INVPCID detected
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
PAX: PCID detected
PAX: strong UDEREF enabled
PAX: INVPCID detected
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
PAX: PCID detected
PAX: strong UDEREF enabled
PAX: INVPCID detected
kvm: enabling virtualization on CPU3
CPU3 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:02: Turning OFF
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 13.195 msecs
PM: early resume of devices complete after 5.957 msecs
rtc_cmos 00:02: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Starting disk
tpm_tis 00:05: TPM is disabled/deactivated (0x6)
usb 2-3: reset SuperSpeed USB device number 2 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: configured for UDMA/133
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
psmouse serio1: synaptics: queried max coordinates: x [..5674], y [..4684]
psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1170..]
PM: resume of devices complete after 5156.533 msecs
Restarting tasks ...
usb 1-3: USB disconnect, device number 2
usb 1-3.1: USB disconnect, device number 3
usblp0: removed
usb 1-3.2: USB disconnect, device number 4
usb 1-3.4: USB disconnect, device number 5
usb 1-3.4.2: USB disconnect, device number 6
usb 1-3.4.2.3: USB disconnect, device number 7
usb 1-3.4.2.4: USB disconnect, device number 8
done.
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
usb 1-3: new high-speed USB device number 9 using xhci_hcd
usb 1-3: New USB device found, idVendor=17ef, idProduct=1010
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3: Product: Lenovo ThinkPad Dock
usb 1-3: Manufacturer: LENOVO
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 4 ports detected
usb 1-3.1: new full-speed USB device number 10 using xhci_hcd
usb 1-3.1: New USB device found, idVendor=043d, idProduct=0078
usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3.1: Product: Lexmark Z600 Series
usb 1-3.1: Manufacturer: Lexmark
usb 1-3.1: SerialNumber: 18K670127065550
usblp 1-3.1:1.0: usblp0: USB Bidirectional printer dev 10 if 0 alt 0 proto 2 vid 0x043D pid 0x0078
usb 1-3.2: new high-speed USB device number 11 using xhci_hcd
usb 1-3.2: New USB device found, idVendor=0ccd, idProduct=00ab
usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3.2: Product: Cinergy T XXS
usb 1-3.2: Manufacturer: TerraTec GmbH
usb 1-3.2: SerialNumber: 0000000001
dvb-usb: found a 'Terratec Cinergy T USB XXS (HD)/ T3' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
dib0700: firmware started successfully.
dvb-usb: found a 'Terratec Cinergy T USB XXS (HD)/ T3' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Terratec Cinergy T USB XXS (HD)/ T3)
usb 1-3.2: DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
DiB0070: successfully identified
Registered IR keymap rc-dib0700-rc5
input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/rc/rc0/input16
rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/rc/rc0
dvb-usb: schedule remote query interval to 50 msecs.
dvb-usb: Terratec Cinergy T USB XXS (HD)/ T3 successfully initialized and connected.
usb 1-3.4: new high-speed USB device number 12 using xhci_hcd
usb 1-3.4: New USB device found, idVendor=17ef, idProduct=100f
usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3.4: Product: Lenovo ThinkPad Dock
usb 1-3.4: Manufacturer: Lenovo
usb 1-3.4: SerialNumber: Rev1.2
hub 1-3.4:1.0: USB hub found
hub 1-3.4:1.0: 3 ports detected
usb 1-3.4.2: new high-speed USB device number 13 using xhci_hcd
usb 1-3.4.2: New USB device found, idVendor=05e3, idProduct=0608
usb 1-3.4.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-3.4.2: Product: USB2.0 Hub
hub 1-3.4.2:1.0: USB hub found
hub 1-3.4.2:1.0: 4 ports detected
usb 1-3.4.2.3: new low-speed USB device number 14 using xhci_hcd
usb 1-3.4.2.3: New USB device found, idVendor=046d, idProduct=c062
usb 1-3.4.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3.4.2.3: Product: USB Laser Mouse
usb 1-3.4.2.3: Manufacturer: Logitech
usb 1-3.4.2.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4.2/1-3.4.2.3/1-3.4.2.3:1.0/0003:046D:C062.0004/input/input17
hid-generic 0003:046D:C062.0004: input: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:14.0-3.4.2.3/input0
usb 1-3.4.2.4: new low-speed USB device number 15 using xhci_hcd
usb 1-3.4.2.4: New USB device found, idVendor=046a, idProduct=0023
usb 1-3.4.2.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-3.4.2.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-3.4.2.4: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: HID 046a:0023 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4.2/1-3.4.2.4/1-3.4.2.4:1.0/0003:046A:0023.0005/input/input18
cherry 0003:046A:0023.0005: input: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:14.0-3.4.2.4/input0
input: HID 046a:0023 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4.2/1-3.4.2.4/1-3.4.2.4:1.1/0003:046A:0023.0006/input/input19
cherry 0003:046A:0023.0006: input: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:14.0-3.4.2.4/input1
wlp3s0: authenticate with 08:96:d7:05:f9:2a
wlp3s0: send auth to 08:96:d7:05:f9:2a (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 08:96:d7:05:f9:2a (try 1/3)
wlp3s0: RX AssocResp from 08:96:d7:05:f9:2a (capab=0x431 status=0 aid=1)
wlp3s0: associated
cfg80211: Calling CRDA for country: DE
cfg80211: Regulatory domain changed to country: DE
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
grsec: denied resource overstep by requesting 69632 for RLIMIT_MEMLOCK against limit 65536 for /usr/bin/kdeinit4[kded4:3250] uid/euid:1000/1000 gid/egid:1000/1000, parent /sbin/init[init:1] uid/euid:0/0 gid/egid:0/0
grsec: denied resource overstep by requesting 69632 for RLIMIT_MEMLOCK against limit 65536 for /usr/bin/kdeinit4[kded4:3250] uid/euid:1000/1000 gid/egid:1000/1000, parent /sbin/init[init:1] uid/euid:0/0 gid/egid:0/0
grsec: denied resource overstep by requesting 69632 for RLIMIT_MEMLOCK against limit 65536 for /usr/bin/knotify4[knotify4:3754] uid/euid:1000/1000 gid/egid:1000/1000, parent /sbin/init[init:1] uid/euid:0/0 gid/egid:0/0
grsec: denied resource overstep by requesting 69632 for RLIMIT_MEMLOCK against limit 65536 for /usr/bin/kdeinit4[kded4:3250] uid/euid:1000/1000 gid/egid:1000/1000, parent /sbin/init[init:1] uid/euid:0/0 gid/egid:0/0
grsec: denied resource overstep by requesting 69632 for RLIMIT_MEMLOCK against limit 65536 for /usr/bin/kdeinit4[kded4:3250] uid/euid:1000/1000 gid/egid:1000/1000, parent /sbin/init[init:1] uid/euid:0/0 gid/egid:0/0
snd_hda_intel 0000:00:1b.0: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[-- Attachment #3: dmesg-4.1.4-hardened --]
[-- Type: text/plain, Size: 46667 bytes --]
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.1.4-hardened (root@t44) (gcc version 4.8.4 (Gentoo Hardened 4.8.4 p1.6, pie-0.6.1) ) #1 SMP Mon Aug 10 15:16:21 CEST 2015
Command line: BOOT_IMAGE=/boot/vmlinuz-4.1.4-hardened root=/dev/sda3 ro init 3 vga=791
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000ae114fff] usable
BIOS-e820: [mem 0x00000000ae115000-0x00000000bb84cfff] reserved
BIOS-e820: [mem 0x00000000bb84d000-0x00000000bb89cfff] ACPI NVS
BIOS-e820: [mem 0x00000000bb89d000-0x00000000bcc73fff] reserved
BIOS-e820: [mem 0x00000000bcc74000-0x00000000bce7efff] ACPI NVS
BIOS-e820: [mem 0x00000000bce7f000-0x00000000bcefefff] ACPI data
BIOS-e820: [mem 0x00000000bceff000-0x00000000bf9fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000033e5fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: LENOVO 20AQCTO1WW/20AQCTO1WW, BIOS GJET83WW (2.33 ) 03/09/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x33e600 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00BE000000 mask 7FFE000000 uncachable
2 base 00BD000000 mask 7FFF000000 uncachable
3 base 00BCF00000 mask 7FFFF00000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
e820: last_pfn = 0xae115 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01e62000, 0x01e62fff] PGTABLE
init_memory_mapping: [mem 0x33e400000-0x33e5fffff]
[mem 0x33e400000-0x33e5fffff] page 2M
BRK [0x01e63000, 0x01e63fff] PGTABLE
init_memory_mapping: [mem 0x320000000-0x33e3fffff]
[mem 0x320000000-0x33e3fffff] page 2M
init_memory_mapping: [mem 0x300000000-0x31fffffff]
[mem 0x300000000-0x31fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xae114fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0xadffffff] page 2M
[mem 0xae000000-0xae114fff] page 4k
init_memory_mapping: [mem 0x100000000-0x2ffffffff]
[mem 0x100000000-0x2ffffffff] page 1G
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000BCEFE170 0000E4 (v01 LENOVO TP-GJ 00002330 PTEC 00000002)
ACPI: FACP 0x00000000BCEF9000 00010C (v05 LENOVO TP-GJ 00002330 PTEC 00000002)
ACPI: DSDT 0x00000000BCEE3000 010F2D (v01 LENOVO TP-GJ 00002330 INTL 20120711)
ACPI: FACS 0x00000000BCD7A000 000040
ACPI: DBGP 0x00000000BCEFC000 000034 (v01 LENOVO TP-GJ 00002330 PTEC 00000002)
ACPI: ECDT 0x00000000BCEFB000 000052 (v01 LENOVO TP-GJ 00002330 PTEC 00000002)
ACPI: HPET 0x00000000BCEF8000 000038 (v01 LENOVO TP-GJ 00002330 PTEC 00000002)
ACPI: APIC 0x00000000BCEF7000 000098 (v01 LENOVO TP-GJ 00002330 PTEC 00000002)
ACPI: MCFG 0x00000000BCEF6000 00003C (v01 LENOVO TP-GJ 00002330 PTEC 00000002)
ACPI: SSDT 0x00000000BCEF5000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20120711)
ACPI: SSDT 0x00000000BCEF4000 000486 (v01 LENOVO TP-SSDT2 00000200 INTL 20120711)
ACPI: SSDT 0x00000000BCEE2000 0009CB (v01 LENOVO SataAhci 00001000 INTL 20120711)
ACPI: SSDT 0x00000000BCEE1000 000152 (v01 LENOVO Rmv_Batt 00001000 INTL 20120711)
ACPI: SSDT 0x00000000BCEE0000 0007F5 (v01 LENOVO Cpu0Ist 00003000 INTL 20120711)
ACPI: SSDT 0x00000000BCEDF000 000AD8 (v01 LENOVO CpuPm 00003000 INTL 20120711)
ACPI: SSDT 0x00000000BCEDD000 00125C (v01 LENOVO SaSsdt 00003000 INTL 20120711)
ACPI: SSDT 0x00000000BCEDC000 000379 (v01 LENOVO CppcTabl 00001000 INTL 20120711)
ACPI: PCCT 0x00000000BCEDB000 00006E (v05 LENOVO TP-GJ 00002330 PTEC 00000002)
ACPI: SSDT 0x00000000BCEDA000 000AC4 (v01 LENOVO Cpc_Tabl 00001000 INTL 20120711)
ACPI: TCPA 0x00000000BCED9000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001)
ACPI: UEFI 0x00000000BCED8000 000042 (v01 LENOVO TP-GJ 00002330 PTEC 00000002)
ACPI: MSDM 0x00000000BCCC2000 000055 (v03 LENOVO TP-GJ 00002330 PTEC 00000002)
ACPI: ASF! 0x00000000BCEFD000 0000A5 (v32 LENOVO TP-GJ 00002330 PTEC 00000002)
ACPI: BATB 0x00000000BCED7000 000046 (v01 LENOVO TP-GJ 00002330 PTEC 00000002)
ACPI: FPDT 0x00000000BCED6000 000064 (v01 LENOVO TP-GJ 00002330 PTEC 00000002)
ACPI: UEFI 0x00000000BCED5000 0002F6 (v01 LENOVO TP-GJ 00002330 PTEC 00000002)
ACPI: DMAR 0x00000000BCED4000 0000B0 (v01 LENOVO TP-GJ 00002330 PTEC 00000002)
ACPI: Local APIC address 0xfee00000
[ffffea0000000000-ffffea000cffffff] PMD -> [ffff880332000000-ffff88033dbfffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000033e5fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x00000000ae114fff]
node 0: [mem 0x0000000100000000-0x000000033e5fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000033e5fffff]
On node 0 totalpages: 3065521
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 11077 pages used for memmap
DMA32 zone: 708885 pages, LIFO batch:31
Normal zone: 36760 pages used for memmap
Normal zone: 2352640 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xbda00000-0xbf9fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: 8 Processors exceeds NR_CPUS limit of 4
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xae115000-0xbb84cfff]
PM: Registered nosave memory: [mem 0xbb84d000-0xbb89cfff]
PM: Registered nosave memory: [mem 0xbb89d000-0xbcc73fff]
PM: Registered nosave memory: [mem 0xbcc74000-0xbce7efff]
PM: Registered nosave memory: [mem 0xbce7f000-0xbcefefff]
PM: Registered nosave memory: [mem 0xbceff000-0xbf9fffff]
PM: Registered nosave memory: [mem 0xbfa00000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfe100fff]
PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
PM: Registered nosave memory: [mem 0xfe113000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices
clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88033e200000 s80488 r8192 d30104 u524288
pcpu-alloc: s80488 r8192 d30104 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3017599
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.1.4-hardened root=/dev/sda3 ro init 3 vga=791
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
Memory: 11963364K/12262084K available (5882K kernel code, 739K rwdata, 2752K rodata, 1340K init, 1068K bss, 298720K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
CONFIG_RCU_FANOUT set to non-default value of 32
Additional per-CPU info printed with stalls.
NR_IRQS:4352 nr_irqs:728 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2494.156 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.31 BogoMIPS (lpj=2494156)
pid_max: default: 32768 minimum: 501
ACPI: Core revision 20150410
ACPI: All ACPI Tables successfully acquired
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
PAX: PCID detected
PAX: strong UDEREF enabled
PAX: INVPCID detected
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 28K (ffffffff81d4f000 - ffffffff81d56000)
ftrace: allocating 19681 entries in 77 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i5-4300U CPU @ 1.90GHz (fam: 06, model: 45, stepping: 01)
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
PAX: PCID detected
PAX: strong UDEREF enabled
PAX: INVPCID detected
#2
PAX: PCID detected
PAX: strong UDEREF enabled
PAX: INVPCID detected
#3
PAX: PCID detected
PAX: strong UDEREF enabled
PAX: INVPCID detected
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (19953.24 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xbb84d000-0xbb89cfff] (327680 bytes)
PM: Registering ACPI NVS region [mem 0xbcc74000-0xbce7efff] (2142208 bytes)
clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
xor: automatically using best checksumming function:
avx : 24580.000 MB/sec
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
raid6: sse2x1 gen() 5828 MB/s
raid6: sse2x1 xor() 4531 MB/s
raid6: sse2x2 gen() 7277 MB/s
raid6: sse2x2 xor() 4970 MB/s
raid6: sse2x4 gen() 8531 MB/s
raid6: sse2x4 xor() 6031 MB/s
raid6: avx2x1 gen() 11382 MB/s
raid6: avx2x2 gen() 13082 MB/s
raid6: avx2x4 gen() 15421 MB/s
raid6: using algorithm avx2x4 gen() 15421 MB/s
raid6: using avx2x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI : EC: EC description table is found, configuring boot EC
ACPI : EC: EC started
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880330018000 000436 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880330018800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880330020000 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PUBS] (on)
acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
ACPI: Power Resource [NVP3] (on)
ACPI: Power Resource [NVP2] (on)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 9 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3f]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfebfffff window]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window]
pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xe0630000-0xe0633fff 64bit]
pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xe0620000-0xe062ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xe0639000-0xe063901f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:155a] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xe0600000-0xe061ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xe063e000-0xe063efff]
pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xe0634000-0xe0637fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:9c1a] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: Enabling MPC IRBNCE
pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
pci 0000:00:1c.1: [8086:9c14] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: Enabling MPC IRBNCE
pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xe063d000-0xe063d3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af]
pci 0000:00:1f.2: reg 0x14: [io 0x30b4-0x30b7]
pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7]
pci 0000:00:1f.2: reg 0x1c: [io 0x30b0-0x30b3]
pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
pci 0000:00:1f.2: reg 0x24: [mem 0xe063c000-0xe063c7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xe0638000-0xe06380ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000
pci 0000:02:00.0: reg 0x10: [mem 0xe0500000-0xe0500fff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xe0500000-0xe05fffff]
pci 0000:03:00.0: [8086:08b2] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xe0400000-0xe0401fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xe0400000-0xe04fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: Enabled 4 GPEs in block 00 to 7F
ACPI : EC: GPE = 0x25, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
e820: reserve RAM buffer [mem 0xae115000-0xafffffff]
e820: reserve RAM buffer [mem 0x33e600000-0x33fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0xbf9fffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x1800-0x189f] could not be reserved
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: [io 0x0880-0x08ff] has been reserved
system 00:01: [io 0x0900-0x097f] has been reserved
system 00:01: [io 0x0980-0x09ff] has been reserved
system 00:01: [io 0x0a00-0x0a7f] has been reserved
system 00:01: [io 0x0a80-0x0aff] has been reserved
system 00:01: [io 0x0b00-0x0b7f] has been reserved
system 00:01: [io 0x0b80-0x0bff] has been reserved
system 00:01: [io 0x15e0-0x15ef] has been reserved
system 00:01: [io 0x1600-0x167f] has been reserved
system 00:01: [io 0x1640-0x165f] has been reserved
system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:01: [mem 0x00000000-0x00000fff] could not be reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs LEN0036 PNP0f13 (active)
pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
pnp: PnP ACPI: found 6 devices
clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xe0500000-0xe05fffff]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xe0400000-0xe04fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfebfffff window]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window]
pci_bus 0000:02: resource 1 [mem 0xe0500000-0xe05fffff]
pci_bus 0000:03: resource 1 [mem 0xe0400000-0xe04fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 7, 786432 bytes)
UDP-Lite hash table entries: 8192 (order: 7, 786432 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
dmar: Host address width 39
dmar: DRHD base: 0x000000fed90000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
dmar: DRHD base: 0x000000fed91000 flags: 0x1
dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
dmar: RMRR base: 0x000000badca000 end: 0x000000bade0fff
dmar: RMRR base: 0x000000bd800000 end: 0x000000bf9fffff
DMAR: No ATSR found
IOMMU: dmar0 using Queued invalidation
IOMMU: dmar1 using Queued invalidation
IOMMU: Setting RMRR:
IOMMU: Setting identity map for device 0000:00:02.0 [0xbd800000 - 0xbf9fffff]
IOMMU: Setting identity map for device 0000:00:14.0 [0xbadca000 - 0xbade0fff]
IOMMU: Setting identity map for device 0000:00:1d.0 [0xbadca000 - 0xbade0fff]
IOMMU: Prepare 0-16MiB unity mapping for LPC
IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
hw unit of domain pp0-core 2^-14 Joules
hw unit of domain package 2^-14 Joules
hw unit of domain dram 2^-14 Joules
hw unit of domain pp1-gpu 2^-14 Joules
resource sanity check: requesting [mem 0xfed10000-0xfed15fff], which spans more than pnp 00:01 [mem 0xfed10000-0xfed13fff]
------------[ cut here ]------------
WARNING: CPU: 1 PID: 1 at arch/x86/mm/ioremap.c:191 __ioremap_caller+0x23c/0x3a0()
Info: mapping multiple BARs. Your kernel is fine.
Modules linked in:
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.1.4-hardened #1
Hardware name: LENOVO 20AQCTO1WW/20AQCTO1WW, BIOS GJET83WW (2.33 ) 03/09/2015
ffffffff810e2b30 0000000000000000 ffffffff817b4360 ffffc9000001bae8
ffffffff815b3597 0000000000002b2b ffffc9000001bb38 ffffc9000001bb28
ffffffff8105e0a6 ffffc9000001bb68 ffffffff817b4360 00000000000000bf
Call Trace:
[<ffffffff810e2b30>] ? print_modules+0x70/0xd0
[<ffffffff815b3597>] dump_stack+0x45/0x5d
[<ffffffff8105e0a6>] warn_slowpath_common+0x86/0xd0
[<ffffffff8105e14a>] warn_slowpath_fmt+0x5a/0x70
[<ffffffff8104a4bc>] __ioremap_caller+0x23c/0x3a0
[<ffffffff8102ae86>] ? snb_uncore_imc_init_box+0x66/0xa0
[<ffffffff8104a646>] ioremap_nocache+0x26/0x40
[<ffffffff8102ae86>] snb_uncore_imc_init_box+0x66/0xa0
[<ffffffff8102907c>] uncore_pci_probe+0xdc/0x1f0
[<ffffffff81387c28>] pci_device_probe+0xa8/0x110
[<ffffffff8141ca16>] driver_probe_device+0x176/0x2f0
[<ffffffff8141cbf0>] ? __device_attach+0x60/0x60
[<ffffffff8141cc9b>] __driver_attach+0xab/0xb0
[<ffffffff8141cbf0>] ? __device_attach+0x60/0x60
[<ffffffff8141cbf0>] ? __device_attach+0x60/0x60
[<ffffffff8141a6db>] bus_for_each_dev+0x7b/0xc0
[<ffffffff8141c3a6>] driver_attach+0x26/0x40
[<ffffffff8141bff8>] bus_add_driver+0x168/0x210
[<ffffffff8141d510>] driver_register+0x60/0xe0
[<ffffffff8138621e>] __pci_register_driver+0x6e/0x80
[<ffffffff81c2357d>] ? uncore_cpu_setup+0x33/0x33
[<ffffffff81c236c0>] intel_uncore_init+0x143/0x4b4
[<ffffffff81c2357d>] ? uncore_cpu_setup+0x33/0x33
[<ffffffff810003a4>] do_one_initcall+0x94/0x1a0
[<ffffffff81c15c7f>] kernel_init_freeable+0x1c9/0x2c1
[<ffffffff81c14eb2>] ? initcall_blacklist+0x148/0x148
[<ffffffff815a9aa0>] ? rest_init+0x80/0x80
[<ffffffff815a9aae>] kernel_init+0xe/0x100
[<ffffffff815baebe>] ret_from_fork+0x3e/0x70
[<ffffffff815a9aa0>] ? rest_init+0x80/0x80
---[ end trace 798d4837c5b5aaa7 ]---
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1439212845.321:1): initialized
page_owner is disabled
zpool: loaded
zbud: loaded
cryptomgr_test (37) used greatest stack depth: 14392 bytes left
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler cfq registered (default)
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4 model 0x45
intel_idle: lapic_timer_reliable_states 0xffffffff
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
ata1: SATA max UDMA/133 abar m2048@0xe063c000 port 0xe063c100 irq 42
ata2: DUMMY
ata3: DUMMY
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 0 bytes nvram, hpet irqs
Intel P-state driver initializing.
Initializing XFRM netlink socket
NET: Registered protocol family 10
Key type dns_resolver registered
registered taskstats version 1
Btrfs loaded
rtc_cmos 00:02: setting system clock to 2015-08-10 13:20:45 UTC (1439212845)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: ATA-10: INTEL SSDSC2BF240A5L, LTVi, max UDMA/133
ata1.00: 468862128 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2BF24 LTVi PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
BTRFS: device fsid 3ac03d1d-c85f-4bf4-9c62-a0e05b23fa8d devid 1 transid 191438 /dev/root
BTRFS info (device sda3): disk space caching is enabled
BTRFS: detected SSD devices, enabling SSD mode
VFS: Mounted root (btrfs filesystem) readonly on device 0:15.
devtmpfs: mounted
Freeing unused kernel memory: 1340K (ffffffff81c00000 - ffffffff81d4f000)
setfont (89) used greatest stack depth: 8 bytes left
systemd-udevd[292]: starting version 216
random: systemd-udevd urandom read with 11 bits of entropy available
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
Linux agpgart interface v0.103
ehci-pci: EHCI PCI platform driver
tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
ACPI: Battery Slot [BAT0] (battery present)
[drm] Initialized drm 1.1.0 20060810
ACPI: Battery Slot [BAT1] (battery present)
ACPI: AC Adapter [AC] (on-line)
wmi: Mapper loaded
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (59 C)
rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 44
Non-volatile memory driver v1.3
thinkpad_acpi: ThinkPad ACPI Extras v0.25
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS GJET83WW (2.33 ), EC unknown
thinkpad_acpi: Lenovo ThinkPad T440s, model 20AQCTO1WW
input: PC Speaker as /devices/platform/pcspkr/input/input3
thinkpad_acpi: Unsupported brightness interface, please contact ibm-acpi-devel@lists.sourceforge.net
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input4
cfg80211: Calling CRDA to update world regulatory domain
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
tpm_tis 00:05: TPM is disabled/deactivated (0x6)
iwlwifi 0000:03:00.0: loaded firmware version 25.32.13.0 op_mode iwlmvm
microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
Setting dangerous option enable_rc6 - tainting kernel
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
tsc: Refined TSC clocksource calibration: 2494.226 MHz
clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3eb3743e, max_idle_ns: 440795257847 ns
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
systemd-udevd[306]: renamed network interface wlan0 to wlp3s0
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 68:f7:28:0e:15:45
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 1000FF-0FF
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.0: debug port 2
e1000e 0000:00:19.0 enp0s25: renamed from eth0
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xe063d000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.1.4-hardened ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000b810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.1.4-hardened xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
systemd-udevd[306]: renamed network interface eth0 to enp0s25
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 9 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.1.4-hardened xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
snd_hda_intel: probe of 0000:00:03.0 failed with error -2
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[drm] Memory usable by graphics device = 2048M
[drm] VT-d active for gfx access
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] DMAR active, disabling use of stolen memory
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
snd_hda_codec_generic hdaudioC0D0: autoconfig for ID 292: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_generic hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_generic hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
snd_hda_codec_generic hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_generic hdaudioC0D0: inputs:
snd_hda_codec_generic hdaudioC0D0: Mic=0x1a
snd_hda_codec_generic hdaudioC0D0: Internal Mic=0x12
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[drm] Initialized i915 1.6.0 20150327 for 0000:00:02.0 on minor 0
[drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
fbcon: inteldrmfb (fb0) is primary device
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 3-3: new SuperSpeed USB device number 2 using xhci_hcd
usb 3-3: New USB device found, idVendor=17ef, idProduct=1010
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: Lenovo ThinkPad Dock
usb 3-3: Manufacturer: LENOVO
hub 3-3:1.0: USB hub found
hub 3-3:1.0: 4 ports detected
usb 2-3: new high-speed USB device number 2 using xhci_hcd
usb 1-1: New USB device found, idVendor=8087, idProduct=8000
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 8 ports detected
usb 2-3: New USB device found, idVendor=17ef, idProduct=1010
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3: Product: Lenovo ThinkPad Dock
usb 2-3: Manufacturer: LENOVO
hub 2-3:1.0: USB hub found
hub 2-3:1.0: 4 ports detected
psmouse serio1: synaptics: queried max coordinates: x [..5674], y [..4684]
psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1170..]
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x12e800, board id: 2962, fw id: 2560
psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
usb 2-3.2: new high-speed USB device number 3 using xhci_hcd
Switched to clocksource tsc
usb 2-3.2: New USB device found, idVendor=0ccd, idProduct=00ab
usb 2-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3.2: Product: Cinergy T XXS
usb 2-3.2: Manufacturer: TerraTec GmbH
usb 2-3.2: SerialNumber: 0000000001
usb 2-3.4: new high-speed USB device number 4 using xhci_hcd
usb 2-3.4: New USB device found, idVendor=17ef, idProduct=100f
usb 2-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3.4: Product: Lenovo ThinkPad Dock
usb 2-3.4: Manufacturer: Lenovo
usb 2-3.4: SerialNumber: Rev1.2
hub 2-3.4:1.0: USB hub found
hub 2-3.4:1.0: 3 ports detected
dvb-usb: found a 'Terratec Cinergy T USB XXS (HD)/ T3' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
dib0700: firmware started successfully.
usb 2-3.4.1: new low-speed USB device number 5 using xhci_hcd
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
usb 2-3.4.1: New USB device found, idVendor=046d, idProduct=c062
usb 2-3.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3.4.1: Product: USB Laser Mouse
usb 2-3.4.1: Manufacturer: Logitech
usb 2-3.4.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 2-3.4.2: new low-speed USB device number 6 using xhci_hcd
dvb-usb: found a 'Terratec Cinergy T USB XXS (HD)/ T3' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Terratec Cinergy T USB XXS (HD)/ T3)
usb 2-3.4.2: New USB device found, idVendor=046a, idProduct=0023
usb 2-3.4.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-3.4.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 2-3.4.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: HID 046a:0023 as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.4/2-3.4.2/2-3.4.2:1.0/0003:046A:0023.0002/input/input12
input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.4/2-3.4.1/2-3.4.1:1.0/0003:046D:C062.0001/input/input13
xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 0 comp_code 1
xhci_hcd 0000:00:14.0: Looking for event-dma 00000000fffdb000 trb-start 00000000fffdcfd0 trb-end 00000000fffdd000 seg-start 00000000fffdc000 seg-end 00000000fffdcff0
cherry 0003:046A:0023.0002: input: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:14.0-3.4.2/input0
hid-generic 0003:046D:C062.0001: input: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:14.0-3.4.1/input0
input: HID 046a:0023 as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.4/2-3.4.2/2-3.4.2:1.1/0003:046A:0023.0003/input/input14
cherry 0003:046A:0023.0003: input: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:14.0-3.4.2/input1
psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input11
usb 2-3.2: DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 0 comp_code 1
xhci_hcd 0000:00:14.0: Looking for event-dma 00000000fffdb000 trb-start 00000000fffdcfd0 trb-end 00000000fffdd000 seg-start 00000000fffdc000 seg-end 00000000fffdcff0
DiB0070 I2C write failed
DiB0070: successfully identified
Registered IR keymap rc-dib0700-rc5
input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/rc/rc0/input15
rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/rc/rc0
dvb-usb: schedule remote query interval to 50 msecs.
dvb-usb: Terratec Cinergy T USB XXS (HD)/ T3 successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_dib0700
grsec: time set by /sbin/hwclock[hwclock:412] uid/euid:0/0 gid/egid:0/0, parent /lib64/rc/sh/openrc-run.sh[openrc-run.sh:411] uid/euid:0/0 gid/egid:0/0
grsec: time set by /sbin/hwclock[hwclock:412] uid/euid:0/0 gid/egid:0/0, parent /lib64/rc/sh/openrc-run.sh[openrc-run.sh:411] uid/euid:0/0 gid/egid:0/0
grsec: time set by /sbin/hwclock[hwclock:414] uid/euid:0/0 gid/egid:0/0, parent /lib64/rc/sh/openrc-run.sh[openrc-run.sh:413] uid/euid:0/0 gid/egid:0/0
BTRFS info (device sda3): turning on discard
BTRFS info (device sda3): use spread ssd allocation scheme
BTRFS info (device sda3): disk space caching is enabled
microcode: Microcode Update Driver: v2.00 removed.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
IPv6: ADDRCONF(NETDEV_UP): tap0: link is not ready
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
device tap0 entered promiscuous mode
device br0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
random: nonblocking pool is initialized
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
NET: Registered protocol family 17
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
wlp3s0: authenticate with 08:96:d7:05:f9:2a
wlp3s0: send auth to 08:96:d7:05:f9:2a (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 08:96:d7:05:f9:2a (try 1/3)
wlp3s0: RX AssocResp from 08:96:d7:05:f9:2a (capab=0x431 status=0 aid=2)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
cfg80211: Calling CRDA for country: DE
cfg80211: Regulatory domain changed to country: DE
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period (net ffffffff81a936c0)
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
reply other threads:[~2015-08-10 13:32 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55C8A7D3.1030301@gmx.de \
--to=toralf.foerster@gmx.de \
--cc=ibm-acpi-devel@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.