All of lore.kernel.org
 help / color / mirror / Atom feed
From: Micah Fedke <micah.fedke@collabora.co.uk>
To: intel-gfx <intel-gfx@lists.freedesktop.org>,
	Daniel Vetter <daniel@ffwll.ch>,
	chris@chris-wilson.co.uk, Daniel Stone <daniel@fooishbar.org>
Subject: [PATCH v2 5/5] tests: make drm_read platform agnostic
Date: Tue, 11 Aug 2015 11:59:16 -0400	[thread overview]
Message-ID: <55CA1BD4.10808@collabora.co.uk> (raw)


Update the drm_read test to operate on any platform to demonstrate the use of
drm_open_driver(OPEN_ANY_GPU).

To work on exynos, the event generation code is converted to use the new CRTC
selection API for vblank.  The first valid crtc is selected at fixture-time.

pipe0_enabled() is updated to use the drmMode* wrapper functions instead of
direct ioctls, and the unnecessary, intel-specific pipe<->crtc mapping ioctl is
dropped.

With these updates in place, drm_read can run successfully on intel and exynos.
Tested on ivb and peach-pi, respectively.

Signed-off-by: Micah Fedke <micah.fedke@collabora.co.uk>
---
 tests/drm_read.c | 87 ++++++++++++++++++++++++++++++++------------------------
 1 file changed, 50 insertions(+), 37 deletions(-)

diff --git a/tests/drm_read.c b/tests/drm_read.c
index fdaf126..38fde26 100644
--- a/tests/drm_read.c
+++ b/tests/drm_read.c
@@ -45,10 +45,15 @@
 #include "drm.h"
 #include "ioctl_wrappers.h"
 #include "drmtest.h"
+#include "igt_core.h"
 #include "igt_aux.h"
+#include "igt_kms.h"
 
 IGT_TEST_DESCRIPTION("Call read(drm) and see if it behaves.");
 
+static drmModeRes *resources;
+static int crtc_idx;
+
 static void sighandler(int sig)
 {
 }
@@ -61,16 +66,19 @@ static void assert_empty(int fd)
 
 static void generate_event(int fd)
 {
-	union drm_wait_vblank vbl;
+	drmVBlank wait_vbl;
+	unsigned crtc_idx_mask;
+	memset(&wait_vbl, 0, sizeof(wait_vbl));
 
-	/* We require that pipe 0 is running */
+	crtc_idx_mask = crtc_idx << DRM_VBLANK_HIGH_CRTC_SHIFT;
+	igt_assert(!(crtc_idx_mask & ~DRM_VBLANK_HIGH_CRTC_MASK));
 
-	vbl.request.type =
-		DRM_VBLANK_RELATIVE |
-		DRM_VBLANK_EVENT;
-	vbl.request.sequence = 0;
+	wait_vbl.request.type = crtc_idx_mask;
+	wait_vbl.request.type |= DRM_VBLANK_RELATIVE;
+	wait_vbl.request.type |= DRM_VBLANK_EVENT;
+	wait_vbl.request.sequence = 1;
 
-	do_ioctl(fd, DRM_IOCTL_WAIT_VBLANK, &vbl);
+	igt_assert(!drmWaitVBlank(fd, &wait_vbl));
 }
 
 static void wait_for_event(int fd)
@@ -154,44 +162,27 @@ static void test_short_buffer(int in, int nonblock)
 
 static int pipe0_enabled(int fd)
 {
-	struct drm_mode_card_res res;
-	uint32_t crtcs[32];
-	int i;
+	drmModeRes *res;
+	drmModeCrtc *crtc;
+	int ret;
 
 	/* We assume we can generate events on pipe 0. So we have better
 	 * make sure that is running!
 	 */
 
-	memset(&res, 0, sizeof(res));
-	res.count_crtcs = 32;
-	res.crtc_id_ptr = (uintptr_t)crtcs;
-
-	if (drmIoctl(fd, DRM_IOCTL_MODE_GETRESOURCES, &res))
-		return 0;
-
-	if (res.count_crtcs > 32)
+	res = drmModeGetResources(fd);
+	igt_assert(res);
+	crtc = drmModeGetCrtc(fd, res->crtcs[crtc_idx]);
+	if (!crtc){
 		return 0;
+	}
 
-	for (i = 0; i < res.count_crtcs; i++) {
-		struct drm_i915_get_pipe_from_crtc_id get_pipe;
-		struct drm_mode_crtc mode;
-
-		memset(&get_pipe, 0, sizeof(get_pipe));
-		memset(&mode, 0, sizeof(mode));
-
-		mode.crtc_id = crtcs[i];
-
-		get_pipe.pipe = -1;
-		get_pipe.crtc_id = mode.crtc_id;
-		drmIoctl(fd, DRM_IOCTL_I915_GET_PIPE_FROM_CRTC_ID, &get_pipe);
-		if (get_pipe.pipe)
-			continue;
+	ret = crtc->mode_valid && crtc->mode.clock;
 
-		drmIoctl(fd, DRM_IOCTL_MODE_GETCRTC, &mode);
-		return mode.mode_valid && mode.mode.clock;
-	}
+	drmModeFreeCrtc(crtc);
+	drmModeFreeResources(res);
 
-	return 0;
+	return ret;
 }
 
 igt_main
@@ -202,8 +193,30 @@ igt_main
 	siginterrupt(SIGALRM, 1);
 
 	igt_fixture {
-		fd = drm_open_driver_master(DRIVER_INTEL);
+		struct kmstest_connector_config config;
+		int i, n;
+
+		fd = drm_open_driver_master(OPEN_ANY_GPU);
+		igt_enable_connectors(fd);
+		kmstest_set_vt_graphics_mode();
+
 		igt_require(pipe0_enabled(fd));
+
+		resources = drmModeGetResources(fd);
+		igt_assert(resources);
+
+		for (i = 0; i < resources->count_connectors; i++) {
+			for (n = 0; n < resources->count_crtcs; n++) {
+				//use the first connector config we find
+				if(kmstest_get_connector_config(fd, resources->connectors[i],
+						1 << n, &config)){
+					crtc_idx = config.crtc_idx;
+					break;
+				}
+			}
+		}
+		drmModeFreeCrtc(config.crtc);
+
 	}
 
 	igt_subtest("invalid-buffer")
-- 
2.5.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

             reply	other threads:[~2015-08-11 15:59 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-11 15:59 Micah Fedke [this message]
2015-08-11 16:15 ` [PATCH v2 5/5] tests: make drm_read platform agnostic Chris Wilson
2015-08-12 13:26 ` Daniel Vetter
2015-08-13 18:12   ` Micah Fedke

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=55CA1BD4.10808@collabora.co.uk \
    --to=micah.fedke@collabora.co.uk \
    --cc=chris@chris-wilson.co.uk \
    --cc=daniel@ffwll.ch \
    --cc=daniel@fooishbar.org \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.