From: christophe.ricard <christophe.ricard@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 23/25] dm: tpm: Convert LPC driver to driver model
Date: Tue, 11 Aug 2015 23:41:04 +0200 [thread overview]
Message-ID: <55CA6BF0.8080507@gmail.com> (raw)
In-Reply-To: <1439304497-10081-24-git-send-email-sjg@chromium.org>
Hi Simon,
Ok for now, except with the xfer handler.
Best Regards
Christophe
On 11/08/2015 16:48, Simon Glass wrote:
> Convert the tpm_tis_lpc driver to use driver model and update boards which
> use it.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> configs/chromebook_link_defconfig | 2 +
> configs/chromebox_panther_defconfig | 2 +
> configs/coreboot-x86_defconfig | 2 +
> drivers/tpm/tpm_tis_lpc.c | 291 +++++++++++++++++-------------------
> 4 files changed, 147 insertions(+), 150 deletions(-)
>
> diff --git a/configs/chromebook_link_defconfig b/configs/chromebook_link_defconfig
> index b0fc5ca..85752e4 100644
> --- a/configs/chromebook_link_defconfig
> +++ b/configs/chromebook_link_defconfig
> @@ -11,12 +11,14 @@ CONFIG_HAVE_VGA_BIOS=y
> CONFIG_BOOTSTAGE=y
> CONFIG_BOOTSTAGE_REPORT=y
> CONFIG_CMD_BOOTSTAGE=y
> +CONFIG_CMD_TPM=y
> CONFIG_OF_CONTROL=y
> CONFIG_DM_PCI=y
> CONFIG_SPI_FLASH=y
> CONFIG_CMD_CROS_EC=y
> CONFIG_CROS_EC=y
> CONFIG_CROS_EC_LPC=y
> +CONFIG_DM_TPM=y
> CONFIG_TPM_TIS_LPC=y
> CONFIG_VIDEO_VESA=y
> CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
> diff --git a/configs/chromebox_panther_defconfig b/configs/chromebox_panther_defconfig
> index e7ef8fe..a6bafe3 100644
> --- a/configs/chromebox_panther_defconfig
> +++ b/configs/chromebox_panther_defconfig
> @@ -11,12 +11,14 @@ CONFIG_HAVE_VGA_BIOS=y
> CONFIG_BOOTSTAGE=y
> CONFIG_BOOTSTAGE_REPORT=y
> CONFIG_CMD_BOOTSTAGE=y
> +CONFIG_CMD_TPM=y
> CONFIG_OF_CONTROL=y
> CONFIG_DM_PCI=y
> CONFIG_SPI_FLASH=y
> CONFIG_CMD_CROS_EC=y
> CONFIG_CROS_EC=y
> CONFIG_CROS_EC_LPC=y
> +CONFIG_DM_TPM=y
> CONFIG_TPM_TIS_LPC=y
> CONFIG_VIDEO_VESA=y
> CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
> diff --git a/configs/coreboot-x86_defconfig b/configs/coreboot-x86_defconfig
> index fc6410b..6d47a58 100644
> --- a/configs/coreboot-x86_defconfig
> +++ b/configs/coreboot-x86_defconfig
> @@ -9,9 +9,11 @@ CONFIG_TSC_CALIBRATION_BYPASS=y
> CONFIG_BOOTSTAGE=y
> CONFIG_BOOTSTAGE_REPORT=y
> CONFIG_CMD_BOOTSTAGE=y
> +CONFIG_CMD_TPM=y
> CONFIG_OF_CONTROL=y
> CONFIG_DM_PCI=y
> CONFIG_SPI_FLASH=y
> +CONFIG_DM_TPM=y
> CONFIG_TPM_TIS_LPC=y
> CONFIG_USE_PRIVATE_LIBGCC=y
> CONFIG_SYS_VSNPRINTF=y
> diff --git a/drivers/tpm/tpm_tis_lpc.c b/drivers/tpm/tpm_tis_lpc.c
> index d09f8ce..13c1534 100644
> --- a/drivers/tpm/tpm_tis_lpc.c
> +++ b/drivers/tpm/tpm_tis_lpc.c
> @@ -14,8 +14,11 @@
> */
>
> #include <common.h>
> -#include <asm/io.h>
> +#include <dm.h>
> +#include <mapmem.h>
> +#include <tis.h>
> #include <tpm.h>
> +#include <asm/io.h>
>
> #define PREFIX "lpc_tpm: "
>
> @@ -36,13 +39,15 @@ struct tpm_locality {
> u8 padding4[251];
> };
>
> +struct tpm_tis_lpc_priv {
> + struct tpm_locality *regs;
> +};
> +
> /*
> * This pointer refers to the TPM chip, 5 of its localities are mapped as an
> * array.
> */
> #define TPM_TOTAL_LOCALITIES 5
> -static struct tpm_locality *lpc_tpm_dev =
> - (struct tpm_locality *)CONFIG_TPM_TIS_BASE_ADDRESS;
>
> /* Some registers' bit field definitions */
> #define TIS_STS_VALID (1 << 7) /* 0x80 */
> @@ -63,85 +68,45 @@ static struct tpm_locality *lpc_tpm_dev =
> #define TIS_STS_BURST_COUNT_MASK (0xffff)
> #define TIS_STS_BURST_COUNT_SHIFT (8)
>
> -/*
> - * Error value returned if a tpm register does not enter the expected state
> - * after continuous polling. No actual TPM register reading ever returns -1,
> - * so this value is a safe error indication to be mixed with possible status
> - * register values.
> - */
> -#define TPM_TIMEOUT_ERR (-1)
> -
> -/* Error value returned on various TPM driver errors. */
> -#define TPM_DRIVER_ERR (1)
> -
> /* 1 second is plenty for anything TPM does. */
> #define MAX_DELAY_US (1000 * 1000)
>
> /* Retrieve burst count value out of the status register contents. */
> static u16 burst_count(u32 status)
> {
> - return (status >> TIS_STS_BURST_COUNT_SHIFT) & TIS_STS_BURST_COUNT_MASK;
> + return (status >> TIS_STS_BURST_COUNT_SHIFT) &
> + TIS_STS_BURST_COUNT_MASK;
> }
>
> -/*
> - * Structures defined below allow creating descriptions of TPM vendor/device
> - * ID information for run time discovery. The only device the system knows
> - * about at this time is Infineon slb9635.
> - */
> -struct device_name {
> - u16 dev_id;
> - const char * const dev_name;
> -};
> -
> -struct vendor_name {
> - u16 vendor_id;
> - const char *vendor_name;
> - const struct device_name *dev_names;
> -};
> -
> -static const struct device_name infineon_devices[] = {
> - {0xb, "SLB9635 TT 1.2"},
> - {0}
> -};
> -
> -static const struct vendor_name vendor_names[] = {
> - {0x15d1, "Infineon", infineon_devices},
> -};
> -
> -/*
> - * Cached vendor/device ID pair to indicate that the device has been already
> - * discovered.
> - */
> -static u32 vendor_dev_id;
> -
> /* TPM access wrappers to support tracing */
> -static u8 tpm_read_byte(const u8 *ptr)
> +static u8 tpm_read_byte(struct tpm_tis_lpc_priv *priv, const u8 *ptr)
> {
> u8 ret = readb(ptr);
> debug(PREFIX "Read reg 0x%4.4x returns 0x%2.2x\n",
> - (u32)(uintptr_t)ptr - (u32)(uintptr_t)lpc_tpm_dev, ret);
> + (u32)(uintptr_t)ptr - (u32)(uintptr_t)priv->regs, ret);
> return ret;
> }
>
> -static u32 tpm_read_word(const u32 *ptr)
> +static u32 tpm_read_word(struct tpm_tis_lpc_priv *priv, const u32 *ptr)
> {
> u32 ret = readl(ptr);
> debug(PREFIX "Read reg 0x%4.4x returns 0x%8.8x\n",
> - (u32)(uintptr_t)ptr - (u32)(uintptr_t)lpc_tpm_dev, ret);
> + (u32)(uintptr_t)ptr - (u32)(uintptr_t)priv->regs, ret);
> return ret;
> }
>
> -static void tpm_write_byte(u8 value, u8 *ptr)
> +static void tpm_write_byte(struct tpm_tis_lpc_priv *priv, u8 value, u8 *ptr)
> {
> debug(PREFIX "Write reg 0x%4.4x with 0x%2.2x\n",
> - (u32)(uintptr_t)ptr - (u32)(uintptr_t)lpc_tpm_dev, value);
> + (u32)(uintptr_t)ptr - (u32)(uintptr_t)priv->regs, value);
> writeb(value, ptr);
> }
>
> -static void tpm_write_word(u32 value, u32 *ptr)
> +static void tpm_write_word(struct tpm_tis_lpc_priv *priv, u32 value,
> + u32 *ptr)
> {
> debug(PREFIX "Write reg 0x%4.4x with 0x%8.8x\n",
> - (u32)(uintptr_t)ptr - (u32)(uintptr_t)lpc_tpm_dev, value);
> + (u32)(uintptr_t)ptr - (u32)(uintptr_t)priv->regs, value);
> writel(value, ptr);
> }
>
> @@ -156,67 +121,51 @@ static void tpm_write_word(u32 value, u32 *ptr)
> * @expected - value the field(s) are supposed to be set to
> *
> * Returns the register contents in case the expected value was found in the
> - * appropriate register bits, or TPM_TIMEOUT_ERR on timeout.
> + * appropriate register bits, or -ETIMEDOUT on timeout.
> */
> -static u32 tis_wait_reg(u32 *reg, u8 mask, u8 expected)
> +static int tis_wait_reg(struct tpm_tis_lpc_priv *priv, u32 *reg, u8 mask,
> + u8 expected)
> {
> u32 time_us = MAX_DELAY_US;
>
> while (time_us > 0) {
> - u32 value = tpm_read_word(reg);
> + u32 value = tpm_read_word(priv, reg);
> if ((value & mask) == expected)
> return value;
> udelay(1); /* 1 us */
> time_us--;
> }
> - return TPM_TIMEOUT_ERR;
> +
> + return -ETIMEDOUT;
> }
>
> /*
> * Probe the TPM device and try determining its manufacturer/device name.
> *
> - * Returns 0 on success (the device is found or was found during an earlier
> - * invocation) or TPM_DRIVER_ERR if the device is not found.
> + * Returns 0 on success, -ve on error
> */
> -int tis_init(void)
> +static int tpm_tis_lpc_probe(struct udevice *dev)
> {
> - u32 didvid = tpm_read_word(&lpc_tpm_dev[0].did_vid);
> - int i;
> - const char *device_name = "unknown";
> - const char *vendor_name = device_name;
> - u16 vid, did;
> -
> - if (vendor_dev_id)
> - return 0; /* Already probed. */
> -
> - if (!didvid || (didvid == 0xffffffff)) {
> - printf("%s: No TPM device found\n", __func__);
> - return TPM_DRIVER_ERR;
> - }
> + struct tpm_tis_lpc_priv *priv = dev_get_priv(dev);
> + u32 vid, did;
> + fdt_addr_t addr;
> + u32 didvid;
>
> - vendor_dev_id = didvid;
> + addr = dev_get_addr(dev);
> + if (addr == FDT_ADDR_T_NONE)
> + return -EINVAL;
> + priv->regs = map_sysmem(addr, 0);
> + didvid = tpm_read_word(priv, &priv->regs[0].did_vid);
>
> vid = didvid & 0xffff;
> did = (didvid >> 16) & 0xffff;
> - for (i = 0; i < ARRAY_SIZE(vendor_names); i++) {
> - int j = 0;
> - u16 known_did;
> -
> - if (vid == vendor_names[i].vendor_id)
> - vendor_name = vendor_names[i].vendor_name;
> -
> - while ((known_did = vendor_names[i].dev_names[j].dev_id) != 0) {
> - if (known_did == did) {
> - device_name =
> - vendor_names[i].dev_names[j].dev_name;
> - break;
> - }
> - j++;
> - }
> - break;
> + if (vid != 0x15d1 || did != 0xb) {
> + debug("Invalid vendor/device ID %04x/%04x\n", vid, did);
> + return -ENOSYS;
> }
>
> - printf("Found TPM %s by %s\n", device_name, vendor_name);
> + debug("Found TPM %s by %s\n", "SLB9635 TT 1.2", "Infineon");
> +
> return 0;
> }
>
> @@ -228,23 +177,25 @@ int tis_init(void)
> * @data - address of the data to send, byte by byte
> * @len - length of the data to send
> *
> - * Returns 0 on success, TPM_DRIVER_ERR on error (in case the device does
> - * not accept the entire command).
> + * Returns 0 on success, -ve on error (in case the device does not accept
> + * the entire command).
> */
> -static u32 tis_senddata(const u8 * const data, u32 len)
> +static u32 tis_senddata(struct tpm_tis_lpc_priv *priv, const u8 * const data,
> + u32 len)
> {
> + struct tpm_locality *regs = priv->regs;
> u32 offset = 0;
> u16 burst = 0;
> u32 max_cycles = 0;
> u8 locality = 0;
> u32 value;
>
> - value = tis_wait_reg(&lpc_tpm_dev[locality].tpm_status,
> + value = tis_wait_reg(priv, ®s[locality].tpm_status,
> TIS_STS_COMMAND_READY, TIS_STS_COMMAND_READY);
> - if (value == TPM_TIMEOUT_ERR) {
> + if (value == -ETIMEDOUT) {
> printf("%s:%d - failed to get 'command_ready' status\n",
> __FILE__, __LINE__);
> - return TPM_DRIVER_ERR;
> + return value;
> }
> burst = burst_count(value);
>
> @@ -256,11 +207,11 @@ static u32 tis_senddata(const u8 * const data, u32 len)
> if (max_cycles++ == MAX_DELAY_US) {
> printf("%s:%d failed to feed %d bytes of %d\n",
> __FILE__, __LINE__, len - offset, len);
> - return TPM_DRIVER_ERR;
> + return -ETIMEDOUT;
> }
> udelay(1);
> - burst = burst_count(tpm_read_word(&lpc_tpm_dev
> - [locality].tpm_status));
> + burst = burst_count(tpm_read_word(priv,
> + ®s[locality].tpm_status));
> }
>
> max_cycles = 0;
> @@ -276,16 +227,16 @@ static u32 tis_senddata(const u8 * const data, u32 len)
> */
> count = min((u32)burst, len - offset - 1);
> while (count--)
> - tpm_write_byte(data[offset++],
> - &lpc_tpm_dev[locality].data);
> + tpm_write_byte(priv, data[offset++],
> + ®s[locality].data);
>
> - value = tis_wait_reg(&lpc_tpm_dev[locality].tpm_status,
> + value = tis_wait_reg(priv, ®s[locality].tpm_status,
> TIS_STS_VALID, TIS_STS_VALID);
>
> - if ((value == TPM_TIMEOUT_ERR) || !(value & TIS_STS_EXPECT)) {
> + if ((value == -ETIMEDOUT) || !(value & TIS_STS_EXPECT)) {
> printf("%s:%d TPM command feed overflow\n",
> __FILE__, __LINE__);
> - return TPM_DRIVER_ERR;
> + return value == -ETIMEDOUT ? value : -EIO;
> }
>
> burst = burst_count(value);
> @@ -300,21 +251,21 @@ static u32 tis_senddata(const u8 * const data, u32 len)
> }
>
> /* Send the last byte. */
> - tpm_write_byte(data[offset++], &lpc_tpm_dev[locality].data);
> + tpm_write_byte(priv, data[offset++], ®s[locality].data);
> /*
> * Verify that TPM does not expect any more data as part of this
> * command.
> */
> - value = tis_wait_reg(&lpc_tpm_dev[locality].tpm_status,
> + value = tis_wait_reg(priv, ®s[locality].tpm_status,
> TIS_STS_VALID, TIS_STS_VALID);
> - if ((value == TPM_TIMEOUT_ERR) || (value & TIS_STS_EXPECT)) {
> + if ((value == -ETIMEDOUT) || (value & TIS_STS_EXPECT)) {
> printf("%s:%d unexpected TPM status 0x%x\n",
> __FILE__, __LINE__, value);
> - return TPM_DRIVER_ERR;
> + return value == -ETIMEDOUT ? value : -EIO;
> }
>
> /* OK, sitting pretty, let's start the command execution. */
> - tpm_write_word(TIS_STS_TPM_GO, &lpc_tpm_dev[locality].tpm_status);
> + tpm_write_word(priv, TIS_STS_TPM_GO, ®s[locality].tpm_status);
> return 0;
> }
>
> @@ -328,10 +279,12 @@ static u32 tis_senddata(const u8 * const data, u32 len)
> *
> * On success stores the number of received bytes to len and returns 0. On
> * errors (misformatted TPM data or synchronization problems) returns
> - * TPM_DRIVER_ERR.
> + * -ve value.
> */
> -static u32 tis_readresponse(u8 *buffer, u32 *len)
> +static u32 tis_readresponse(struct tpm_tis_lpc_priv *priv, u8 *buffer,
> + u32 *len)
> {
> + struct tpm_locality *regs = priv->regs;
> u16 burst;
> u32 value;
> u32 offset = 0;
> @@ -341,12 +294,12 @@ static u32 tis_readresponse(u8 *buffer, u32 *len)
> int max_cycles = 0;
>
> /* Wait for the TPM to process the command. */
> - value = tis_wait_reg(&lpc_tpm_dev[locality].tpm_status,
> + value = tis_wait_reg(priv, ®s[locality].tpm_status,
> has_data, has_data);
> - if (value == TPM_TIMEOUT_ERR) {
> + if (value == -ETIMEDOUT) {
> printf("%s:%d failed processing command\n",
> __FILE__, __LINE__);
> - return TPM_DRIVER_ERR;
> + return value;
> }
>
> do {
> @@ -354,18 +307,18 @@ static u32 tis_readresponse(u8 *buffer, u32 *len)
> if (max_cycles++ == MAX_DELAY_US) {
> printf("%s:%d TPM stuck on read\n",
> __FILE__, __LINE__);
> - return TPM_DRIVER_ERR;
> + return -EIO;
> }
> udelay(1);
> - value = tpm_read_word(&lpc_tpm_dev
> - [locality].tpm_status);
> + value = tpm_read_word(priv,
> + ®s[locality].tpm_status);
> }
>
> max_cycles = 0;
>
> while (burst-- && (offset < expected_count)) {
> - buffer[offset++] = tpm_read_byte(&lpc_tpm_dev
> - [locality].data);
> + buffer[offset++] = tpm_read_byte(priv,
> + ®s[locality].data);
>
> if (offset == 6) {
> /*
> @@ -386,18 +339,18 @@ static u32 tis_readresponse(u8 *buffer, u32 *len)
> printf("%s:%d bad response size %d\n",
> __FILE__, __LINE__,
> expected_count);
> - return TPM_DRIVER_ERR;
> + return -ENOSPC;
> }
> }
> }
>
> /* Wait for the next portion. */
> - value = tis_wait_reg(&lpc_tpm_dev[locality].tpm_status,
> + value = tis_wait_reg(priv, ®s[locality].tpm_status,
> TIS_STS_VALID, TIS_STS_VALID);
> - if (value == TPM_TIMEOUT_ERR) {
> + if (value == -ETIMEDOUT) {
> printf("%s:%d failed to read response\n",
> __FILE__, __LINE__);
> - return TPM_DRIVER_ERR;
> + return value;
> }
>
> if (offset == expected_count)
> @@ -412,68 +365,106 @@ static u32 tis_readresponse(u8 *buffer, u32 *len)
> if (value & TIS_STS_DATA_AVAILABLE) {
> printf("%s:%d wrong receive status %x\n",
> __FILE__, __LINE__, value);
> - return TPM_DRIVER_ERR;
> + return -EBADMSG;
> }
>
> /* Tell the TPM that we are done. */
> - tpm_write_word(TIS_STS_COMMAND_READY, &lpc_tpm_dev
> - [locality].tpm_status);
> + tpm_write_word(priv, TIS_STS_COMMAND_READY,
> + ®s[locality].tpm_status);
> *len = offset;
> return 0;
> }
>
> -int tis_open(void)
> +static int tpm_tis_lpc_open(struct udevice *dev)
> {
> + struct tpm_tis_lpc_priv *priv = dev_get_priv(dev);
> + struct tpm_locality *regs = priv->regs;
> u8 locality = 0; /* we use locality zero for everything. */
> -
> - if (tis_close())
> - return TPM_DRIVER_ERR;
> + int ret;
>
> /* now request access to locality. */
> - tpm_write_word(TIS_ACCESS_REQUEST_USE, &lpc_tpm_dev[locality].access);
> + tpm_write_word(priv, TIS_ACCESS_REQUEST_USE, ®s[locality].access);
>
> /* did we get a lock? */
> - if (tis_wait_reg(&lpc_tpm_dev[locality].access,
> + ret = tis_wait_reg(priv, ®s[locality].access,
> TIS_ACCESS_ACTIVE_LOCALITY,
> - TIS_ACCESS_ACTIVE_LOCALITY) == TPM_TIMEOUT_ERR) {
> + TIS_ACCESS_ACTIVE_LOCALITY);
> + if (ret == -ETIMEDOUT) {
> printf("%s:%d - failed to lock locality %d\n",
> __FILE__, __LINE__, locality);
> - return TPM_DRIVER_ERR;
> + return ret;
> }
>
> - tpm_write_word(TIS_STS_COMMAND_READY,
> - &lpc_tpm_dev[locality].tpm_status);
> + tpm_write_word(priv, TIS_STS_COMMAND_READY,
> + ®s[locality].tpm_status);
> return 0;
> }
>
> -int tis_close(void)
> +static int tpm_tis_lpc_close(struct udevice *dev)
> {
> + struct tpm_tis_lpc_priv *priv = dev_get_priv(dev);
> + struct tpm_locality *regs = priv->regs;
> u8 locality = 0;
>
> - if (tpm_read_word(&lpc_tpm_dev[locality].access) &
> + if (tpm_read_word(priv, ®s[locality].access) &
> TIS_ACCESS_ACTIVE_LOCALITY) {
> - tpm_write_word(TIS_ACCESS_ACTIVE_LOCALITY,
> - &lpc_tpm_dev[locality].access);
> + tpm_write_word(priv, TIS_ACCESS_ACTIVE_LOCALITY,
> + ®s[locality].access);
>
> - if (tis_wait_reg(&lpc_tpm_dev[locality].access,
> + if (tis_wait_reg(priv, ®s[locality].access,
> TIS_ACCESS_ACTIVE_LOCALITY, 0) ==
> - TPM_TIMEOUT_ERR) {
> + -ETIMEDOUT) {
> printf("%s:%d - failed to release locality %d\n",
> __FILE__, __LINE__, locality);
> - return TPM_DRIVER_ERR;
> + return -ETIMEDOUT;
> }
> }
> return 0;
> }
>
> -int tis_sendrecv(const u8 *sendbuf, size_t send_size,
> - u8 *recvbuf, size_t *recv_len)
> +static int tpm_tis_lpc_xfer(struct udevice *dev, const u8 *sendbuf,
> + size_t send_size, u8 *recvbuf, size_t *recv_len)
> {
> - if (tis_senddata(sendbuf, send_size)) {
> + struct tpm_tis_lpc_priv *priv = dev_get_priv(dev);
> + int ret;
> +
> + ret = tis_senddata(priv, sendbuf, send_size);
> + if (ret) {
> printf("%s:%d failed sending data to TPM\n",
> __FILE__, __LINE__);
> - return TPM_DRIVER_ERR;
> + return ret;
> }
>
> - return tis_readresponse(recvbuf, (u32 *)recv_len);
> + return tis_readresponse(priv, recvbuf, (u32 *)recv_len);
> +}
> +
> +static int tpm_tis_get_desc(struct udevice *dev, char *buf, int size)
> +{
> + if (size < 50)
> + return -ENOSPC;
> +
> + return snprintf(buf, size, "1.2 TPM (vendor %s, chip %s)",
> + "Infineon", "SLB9635 TT 1.2");
> }
> +
> +
> +static const struct tpm_ops tpm_tis_lpc_ops = {
> + .open = tpm_tis_lpc_open,
> + .close = tpm_tis_lpc_close,
> + .get_desc = tpm_tis_get_desc,
> + .xfer = tpm_tis_lpc_xfer,
> +};
> +
> +static const struct udevice_id tpm_tis_lpc_ids[] = {
> + { .compatible = "infineon,slb9635lpc" },
> + { }
> +};
> +
> +U_BOOT_DRIVER(tpm_tis_lpc) = {
> + .name = "tpm_tis_lpc",
> + .id = UCLASS_TPM,
> + .of_match = tpm_tis_lpc_ids,
> + .ops = &tpm_tis_lpc_ops,
> + .probe = tpm_tis_lpc_probe,
> + .priv_auto_alloc_size = sizeof(struct tpm_tis_lpc_priv),
> +};
next prev parent reply other threads:[~2015-08-11 21:41 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-11 14:47 [U-Boot] [PATCH 00/25] dm: Convert TPM drivers to driver model Simon Glass
2015-08-11 14:47 ` [U-Boot] [PATCH 01/25] tpm: Remove old pre-driver-model I2C code Simon Glass
2015-08-11 21:41 ` christophe.ricard
2015-08-13 1:30 ` Simon Glass
2015-08-11 14:47 ` [U-Boot] [PATCH 02/25] tpm: Drop two unused options Simon Glass
2015-08-11 21:44 ` christophe.ricard
2015-08-11 14:47 ` [U-Boot] [PATCH 03/25] tpm: Add Kconfig options for TPMs Simon Glass
2015-08-11 21:45 ` christophe.ricard
2015-08-13 1:30 ` Simon Glass
2015-08-11 14:47 ` [U-Boot] [PATCH 04/25] tpm: Convert board config TPM options to Kconfig Simon Glass
2015-08-11 21:45 ` christophe.ricard
2015-08-11 14:47 ` [U-Boot] [PATCH 05/25] tpm: Convert drivers to use SPDX Simon Glass
2015-08-11 21:41 ` christophe.ricard
2015-08-11 14:47 ` [U-Boot] [PATCH 06/25] tpm: Move the I2C TPM code into one file Simon Glass
2015-08-11 21:42 ` christophe.ricard
2015-08-13 1:30 ` Simon Glass
2015-08-13 20:26 ` Christophe Ricard
2015-08-11 14:47 ` [U-Boot] [PATCH 07/25] tpm: tpm_tis_i2c: Drop unnecessary methods Simon Glass
2015-08-11 21:47 ` christophe.ricard
2015-08-13 1:30 ` Simon Glass
2015-08-13 20:28 ` Christophe Ricard
2015-08-13 22:53 ` Simon Glass
2015-08-11 14:48 ` [U-Boot] [PATCH 08/25] tpm: tpm_tis_i2c: Drop struct tpm_vendor_specific Simon Glass
2015-08-11 21:47 ` christophe.ricard
2015-08-13 1:30 ` Simon Glass
2015-08-13 20:32 ` Christophe Ricard
2015-08-13 22:53 ` Simon Glass
2015-08-11 14:48 ` [U-Boot] [PATCH 09/25] tpm: tpm_tis_i2c: Merge struct tpm_dev into tpm_chip Simon Glass
2015-08-11 21:46 ` christophe.ricard
2015-08-11 14:48 ` [U-Boot] [PATCH 10/25] tpm: tpm_tis_i2c: Merge struct tpm " Simon Glass
2015-08-11 21:46 ` christophe.ricard
2015-08-11 14:48 ` [U-Boot] [PATCH 11/25] tpm: tpm_tis_i2c: Move definitions into the header file Simon Glass
2015-08-11 21:45 ` christophe.ricard
2015-08-11 14:48 ` [U-Boot] [PATCH 12/25] tpm: tpm_tis_i2c: Simplify init code Simon Glass
2015-08-11 21:45 ` christophe.ricard
2015-08-11 14:48 ` [U-Boot] [PATCH 13/25] tpm: tpm_tis_i2c: Use a consistent tpm_tis_i2c_ prefix Simon Glass
2015-08-11 21:44 ` christophe.ricard
2015-08-11 14:48 ` [U-Boot] [PATCH 14/25] tpm: tpm_tis_i2c: Tidy up delays Simon Glass
2015-08-11 21:44 ` christophe.ricard
2015-08-11 14:48 ` [U-Boot] [PATCH 15/25] dm: tpm: Add a uclass for Trusted Platform Modules Simon Glass
2015-08-11 21:44 ` christophe.ricard
2015-08-11 14:48 ` [U-Boot] [PATCH 16/25] dm: tpm: Convert the TPM command and library to driver model Simon Glass
2015-08-11 21:43 ` christophe.ricard
2015-08-11 14:48 ` [U-Boot] [PATCH 17/25] dm: i2c: Add a command to adjust the offset length Simon Glass
2015-08-11 14:48 ` [U-Boot] [PATCH 18/25] tpm: Report tpm errors on the command line Simon Glass
2015-08-11 21:43 ` christophe.ricard
2015-08-11 14:48 ` [U-Boot] [PATCH 19/25] dm: tpm: sandbox: Convert TPM driver to driver model Simon Glass
2015-08-11 21:42 ` christophe.ricard
2015-08-11 14:48 ` [U-Boot] [PATCH 20/25] tpm: Check that parse_byte_string() has data to parse Simon Glass
2015-08-11 21:42 ` christophe.ricard
2015-08-11 14:48 ` [U-Boot] [PATCH 21/25] exynos: x86: dts: Add tpm nodes to the device tree for Chrome OS devices Simon Glass
2015-08-11 14:48 ` [U-Boot] [PATCH 22/25] dm: tpm: Convert I2C driver to driver model Simon Glass
2015-08-11 21:41 ` christophe.ricard
2015-08-11 14:48 ` [U-Boot] [PATCH 23/25] dm: tpm: Convert LPC " Simon Glass
2015-08-11 21:41 ` christophe.ricard [this message]
2015-08-11 14:48 ` [U-Boot] [PATCH 24/25] tpm: Add a 'tpm info' command Simon Glass
2015-08-11 21:40 ` christophe.ricard
2015-08-11 14:48 ` [U-Boot] [PATCH 25/25] tegra: nyan: Enable TPM command and driver Simon Glass
2015-08-11 21:40 ` christophe.ricard
2015-08-11 21:50 ` [U-Boot] [PATCH 00/25] dm: Convert TPM drivers to driver model christophe.ricard
2015-08-13 1:30 ` Simon Glass
2015-08-13 20:22 ` Christophe Ricard
2015-08-13 22:52 ` Simon Glass
2015-08-20 21:39 ` Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55CA6BF0.8080507@gmail.com \
--to=christophe.ricard@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.