From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/2] arm: Enable CONFIG_SYS_GENERIC_BOARD for all boards
Date: Fri, 14 Aug 2015 06:50:21 +0200 [thread overview]
Message-ID: <55CD738D.2090701@denx.de> (raw)
In-Reply-To: <1439500791-19068-2-git-send-email-sjg@chromium.org>
Hi Simon,
On 13.08.2015 23:19, Simon Glass wrote:
> All boards should be converted to generic board by now. Change the rest
> over. If this causes run-time breakages then we can remove those boards.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> arch/Kconfig | 1 +
> arch/arm/include/asm/arch-lpc32xx/config.h | 2 --
> include/configs/VCMA9.h | 1 -
> include/configs/am3517_crane.h | 1 -
> include/configs/am3517_evm.h | 1 -
> include/configs/apf27.h | 1 -
> include/configs/armadillo-800eva.h | 1 -
> include/configs/aspenite.h | 5 -----
> include/configs/at91-sama5_common.h | 2 --
> include/configs/at91rm9200ek.h | 2 --
> include/configs/at91sam9260ek.h | 2 --
> include/configs/at91sam9261ek.h | 2 --
> include/configs/at91sam9263ek.h | 2 --
> include/configs/at91sam9m10g45ek.h | 2 --
> include/configs/at91sam9n12ek.h | 1 -
> include/configs/at91sam9rlek.h | 2 --
> include/configs/at91sam9x5ek.h | 2 --
> include/configs/bcm28155_ap.h | 1 -
> include/configs/bcm_ep_board.h | 2 --
> include/configs/bur_am335x_common.h | 2 --
> include/configs/calimain.h | 1 -
> include/configs/cm5200.h | 3 ---
> include/configs/cm_t35.h | 1 -
> include/configs/cm_t3517.h | 1 -
> include/configs/cm_t54.h | 3 ---
> include/configs/colibri_pxa270.h | 1 -
> include/configs/colibri_vf.h | 1 -
> include/configs/corvus.h | 1 -
> include/configs/da850evm.h | 1 -
> include/configs/db-88f6820-gp.h | 1 -
> include/configs/db-mv784mp-gp.h | 1 -
> include/configs/digsy_mtc.h | 1 -
> include/configs/dns325.h | 1 -
> include/configs/dockstar.h | 2 --
> include/configs/dreamplug.h | 1 -
> include/configs/edminiv2.h | 3 ---
> include/configs/ethernut5.h | 2 --
> include/configs/exynos-common.h | 2 --
> include/configs/flea3.h | 1 -
> include/configs/goflexhome.h | 2 --
> include/configs/gplugd.h | 5 -----
> include/configs/guruplug.h | 2 --
> include/configs/h2200.h | 1 -
> include/configs/highbank.h | 1 -
> include/configs/ib62x0.h | 2 --
> include/configs/iconnect.h | 2 --
> include/configs/imx31_phycore.h | 2 --
> include/configs/integrator-common.h | 1 -
> include/configs/ipam390.h | 1 -
> include/configs/km/km_arm.h | 2 --
> include/configs/km82xx.h | 1 -
> include/configs/km8360.h | 1 -
> include/configs/kzm9g.h | 1 -
> include/configs/ls1021aqds.h | 2 --
> include/configs/ls1021atwr.h | 2 --
> include/configs/ls2085a_common.h | 2 --
> include/configs/lsxl.h | 2 --
> include/configs/m53evk.h | 1 -
> include/configs/maxbcm.h | 1 -
> include/configs/mcx.h | 2 --
> include/configs/mx25pdk.h | 1 -
> include/configs/mx31ads.h | 2 --
> include/configs/mx31pdk.h | 2 --
> include/configs/mx35pdk.h | 1 -
> include/configs/mx51evk.h | 1 -
> include/configs/mx53ard.h | 2 --
> include/configs/mx53evk.h | 2 --
> include/configs/mx53loco.h | 2 --
> include/configs/mx53smd.h | 2 --
> include/configs/mx6_common.h | 1 -
> include/configs/mx6ul_14x14_evk.h | 1 -
> include/configs/mxs.h | 5 -----
> include/configs/nas220.h | 1 -
> include/configs/nokia_rx51.h | 1 -
> include/configs/omap3_zoom1.h | 1 -
> include/configs/omapl138_lcdk.h | 1 -
> include/configs/p1_p2_rdb_pc.h | 1 -
> include/configs/pm9261.h | 2 --
> include/configs/pm9263.h | 2 --
> include/configs/pm9g45.h | 2 --
> include/configs/pogo_e02.h | 2 --
> include/configs/rcar-gen2-common.h | 1 -
> include/configs/rpi-common.h | 1 -
> include/configs/s5p_goni.h | 2 --
> include/configs/sheevaplug.h | 2 --
> include/configs/siemens-am33x-common.h | 2 --
> include/configs/smdk2410.h | 2 --
> include/configs/smdkc100.h | 2 --
> include/configs/snapper9260.h | 1 -
> include/configs/socfpga_common.h | 2 --
> include/configs/spear-common.h | 2 --
> include/configs/stm32f429-discovery.h | 1 -
> include/configs/stv0991.h | 1 -
> include/configs/sunxi-common.h | 1 -
> include/configs/tam3517-common.h | 1 -
> include/configs/tao3530.h | 1 -
> include/configs/taurus.h | 1 -
> include/configs/tegra-common.h | 1 -
> include/configs/ti_armv7_common.h | 1 -
> include/configs/tricorder.h | 2 --
> include/configs/uniphier.h | 2 --
> include/configs/usb_a9263.h | 1 -
> include/configs/usbarmory.h | 1 -
> include/configs/vexpress_aemv8a.h | 3 ---
> include/configs/vexpress_common.h | 1 -
> include/configs/vf610twr.h | 1 -
> include/configs/woodburn_common.h | 1 -
> include/configs/work_92105.h | 1 -
> include/configs/x600.h | 1 -
> include/configs/xilinx-ppc.h | 2 --
> include/configs/xilinx_zynqmp.h | 2 --
> include/configs/zmx25.h | 2 --
> include/configs/zynq-common.h | 2 --
> 113 files changed, 1 insertion(+), 180 deletions(-)
Nice statistic. :)
Acked-by: Stefan Roese <sr@denx.de>
Thanks,
Stefan
next prev parent reply other threads:[~2015-08-14 4:50 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-13 21:19 [U-Boot] [PATCH 0/2] arm: Move all boards over to generic board Simon Glass
2015-08-13 21:19 ` [U-Boot] [PATCH 1/2] arm: Enable CONFIG_SYS_GENERIC_BOARD for all boards Simon Glass
2015-08-13 22:38 ` Masahiro Yamada
2015-08-13 22:52 ` Simon Glass
2015-08-14 4:47 ` Anatolij Gustschin
2015-08-14 4:50 ` Stefan Roese [this message]
2015-08-27 10:22 ` Ajay
2015-08-13 21:19 ` [U-Boot] [PATCH 2/2] arm: Drop old non-generic-board code Simon Glass
2015-08-18 13:03 ` [U-Boot] [PATCH 0/2] arm: Move all boards over to generic board Pavel Machek
2015-08-21 20:52 ` Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55CD738D.2090701@denx.de \
--to=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.