All of lore.kernel.org
 help / color / mirror / Atom feed
From: Pankaj Dubey <pankaj.dubey@samsung.com>
To: Chanwoo Choi <cw00.choi@samsung.com>,
	s.nawrocki@samsung.com, tomasz.figa@gmail.com, kgene@kernel.org,
	k.kozlowski@samsung.com
Cc: mturquette@baylibre.com, sboyd@codeaurora.org,
	linux-samsung-soc@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [1/4] clk: samsung: exynos3250: Add UART2 clock
Date: Mon, 17 Aug 2015 08:59:38 +0530	[thread overview]
Message-ID: <55D15522.7080603@samsung.com> (raw)
In-Reply-To: <1439264784-30322-2-git-send-email-cw00.choi@samsung.com>

Hi Chanwoo,

Thanks for this patch. Similar patch[1] was posted long back, and there 
were some concern from your side, if you think those concerns are fixed, 
then my patch [1] are still valid and can be taken. If it needs to be 
rebase I am happy to do that.

[1] 
http://lists.infradead.org/pipermail/linux-arm-kernel/2014-September/291239.html


Thanks,
Pankaj Dubey
On Tuesday 11 August 2015 09:16 AM, Chanwoo Choi wrote:
> This patch add the UART2 clocks (mux, divider, gate) of Exynos3250 SoC.
>
> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
> Cc: Tomasz Figa <tomasz.figa@gmail.com>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
>
> ---
> drivers/clk/samsung/clk-exynos3250.c   | 6 ++++++
>   include/dt-bindings/clock/exynos3250.h | 6 +++++-
>   2 files changed, 11 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clk/samsung/clk-exynos3250.c b/drivers/clk/samsung/clk-exynos3250.c
> index 538de66a759e..2105863a3ace 100644
> --- a/drivers/clk/samsung/clk-exynos3250.c
> +++ b/drivers/clk/samsung/clk-exynos3250.c
> @@ -307,6 +307,7 @@ static struct samsung_mux_clock mux_clks[] __initdata = {
>   	MUX(CLK_MOUT_MMC0, "mout_mmc0", group_sclk_p, SRC_FSYS, 0, 4),
>
>   	/* SRC_PERIL0 */
> +	MUX(CLK_MOUT_UART2, "mout_uart2", group_sclk_p, SRC_PERIL0, 8, 4),
>   	MUX(CLK_MOUT_UART1, "mout_uart1", group_sclk_p, SRC_PERIL0, 4, 4),
>   	MUX(CLK_MOUT_UART0, "mout_uart0", group_sclk_p, SRC_PERIL0, 0, 4),
>
> @@ -389,6 +390,7 @@ static struct samsung_div_clock div_clks[] __initdata = {
>   	DIV(CLK_DIV_MMC0, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4),
>
>   	/* DIV_PERIL0 */
> +	DIV(CLK_DIV_UART2, "div_uart2", "mout_uart2", DIV_PERIL0, 8, 4),
>   	DIV(CLK_DIV_UART1, "div_uart1", "mout_uart1", DIV_PERIL0, 4, 4),
>   	DIV(CLK_DIV_UART0, "div_uart0", "mout_uart0", DIV_PERIL0, 0, 4),
>
> @@ -551,6 +553,9 @@ static struct samsung_gate_clock gate_clks[] __initdata = {
>   		GATE_SCLK_PERIL, 7, CLK_SET_RATE_PARENT, 0),
>   	GATE(CLK_SCLK_SPI0, "sclk_spi0", "div_spi0_pre",
>   		GATE_SCLK_PERIL, 6, CLK_SET_RATE_PARENT, 0),
> +
> +	GATE(CLK_SCLK_UART2, "sclk_uart2", "div_uart2",
> +		GATE_SCLK_PERIL, 2, CLK_SET_RATE_PARENT, 0),
>   	GATE(CLK_SCLK_UART1, "sclk_uart1", "div_uart1",
>   		GATE_SCLK_PERIL, 1, CLK_SET_RATE_PARENT, 0),
>   	GATE(CLK_SCLK_UART0, "sclk_uart0", "div_uart0",
> @@ -648,6 +653,7 @@ static struct samsung_gate_clock gate_clks[] __initdata = {
>   	GATE(CLK_I2C2, "i2c2", "div_aclk_100", GATE_IP_PERIL, 8, 0, 0),
>   	GATE(CLK_I2C1, "i2c1", "div_aclk_100", GATE_IP_PERIL, 7, 0, 0),
>   	GATE(CLK_I2C0, "i2c0", "div_aclk_100", GATE_IP_PERIL, 6, 0, 0),
> +	GATE(CLK_UART2, "uart2", "div_aclk_100", GATE_IP_PERIL, 2, 0, 0),
>   	GATE(CLK_UART1, "uart1", "div_aclk_100", GATE_IP_PERIL, 1, 0, 0),
>   	GATE(CLK_UART0, "uart0", "div_aclk_100", GATE_IP_PERIL, 0, 0, 0),
>   };
> diff --git a/include/dt-bindings/clock/exynos3250.h b/include/dt-bindings/clock/exynos3250.h
> index aab088d30199..89a7d97b002c 100644
> --- a/include/dt-bindings/clock/exynos3250.h
> +++ b/include/dt-bindings/clock/exynos3250.h
> @@ -78,6 +78,7 @@
>   #define CLK_MOUT_CORE			58
>   #define CLK_MOUT_APLL			59
>   #define CLK_MOUT_ACLK_266_SUB		60
> +#define CLK_MOUT_UART2			61
>
>   /* Dividers */
>   #define CLK_DIV_GPL			64
> @@ -126,6 +127,7 @@
>   #define CLK_DIV_CORE			107
>   #define CLK_DIV_HPM			108
>   #define CLK_DIV_COPY			109
> +#define CLK_DIV_UART2			110
>
>   /* Gates */
>   #define CLK_ASYNC_G3D			128
> @@ -222,6 +224,7 @@
>   #define CLK_BLOCK_MFC			219
>   #define CLK_BLOCK_CAM			220
>   #define CLK_SMIES			221
> +#define CLK_UART2			222
>
>   /* Special clocks */
>   #define CLK_SCLK_JPEG			224
> @@ -248,12 +251,13 @@
>   #define CLK_SCLK_SPI0			245
>   #define CLK_SCLK_UART1			246
>   #define CLK_SCLK_UART0			247
> +#define CLK_SCLK_UART2			248
>
>   /*
>    * Total number of clocks of main CMU.
>    * NOTE: Must be equal to last clock ID increased by one.
>    */
> -#define CLK_NR_CLKS			248
> +#define CLK_NR_CLKS			249
>
>   /*
>    * CMU DMC
>

WARNING: multiple messages have this Message-ID (diff)
From: pankaj.dubey@samsung.com (Pankaj Dubey)
To: linux-arm-kernel@lists.infradead.org
Subject: [1/4] clk: samsung: exynos3250: Add UART2 clock
Date: Mon, 17 Aug 2015 08:59:38 +0530	[thread overview]
Message-ID: <55D15522.7080603@samsung.com> (raw)
In-Reply-To: <1439264784-30322-2-git-send-email-cw00.choi@samsung.com>

Hi Chanwoo,

Thanks for this patch. Similar patch[1] was posted long back, and there 
were some concern from your side, if you think those concerns are fixed, 
then my patch [1] are still valid and can be taken. If it needs to be 
rebase I am happy to do that.

[1] 
http://lists.infradead.org/pipermail/linux-arm-kernel/2014-September/291239.html


Thanks,
Pankaj Dubey
On Tuesday 11 August 2015 09:16 AM, Chanwoo Choi wrote:
> This patch add the UART2 clocks (mux, divider, gate) of Exynos3250 SoC.
>
> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
> Cc: Tomasz Figa <tomasz.figa@gmail.com>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
>
> ---
> drivers/clk/samsung/clk-exynos3250.c   | 6 ++++++
>   include/dt-bindings/clock/exynos3250.h | 6 +++++-
>   2 files changed, 11 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clk/samsung/clk-exynos3250.c b/drivers/clk/samsung/clk-exynos3250.c
> index 538de66a759e..2105863a3ace 100644
> --- a/drivers/clk/samsung/clk-exynos3250.c
> +++ b/drivers/clk/samsung/clk-exynos3250.c
> @@ -307,6 +307,7 @@ static struct samsung_mux_clock mux_clks[] __initdata = {
>   	MUX(CLK_MOUT_MMC0, "mout_mmc0", group_sclk_p, SRC_FSYS, 0, 4),
>
>   	/* SRC_PERIL0 */
> +	MUX(CLK_MOUT_UART2, "mout_uart2", group_sclk_p, SRC_PERIL0, 8, 4),
>   	MUX(CLK_MOUT_UART1, "mout_uart1", group_sclk_p, SRC_PERIL0, 4, 4),
>   	MUX(CLK_MOUT_UART0, "mout_uart0", group_sclk_p, SRC_PERIL0, 0, 4),
>
> @@ -389,6 +390,7 @@ static struct samsung_div_clock div_clks[] __initdata = {
>   	DIV(CLK_DIV_MMC0, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4),
>
>   	/* DIV_PERIL0 */
> +	DIV(CLK_DIV_UART2, "div_uart2", "mout_uart2", DIV_PERIL0, 8, 4),
>   	DIV(CLK_DIV_UART1, "div_uart1", "mout_uart1", DIV_PERIL0, 4, 4),
>   	DIV(CLK_DIV_UART0, "div_uart0", "mout_uart0", DIV_PERIL0, 0, 4),
>
> @@ -551,6 +553,9 @@ static struct samsung_gate_clock gate_clks[] __initdata = {
>   		GATE_SCLK_PERIL, 7, CLK_SET_RATE_PARENT, 0),
>   	GATE(CLK_SCLK_SPI0, "sclk_spi0", "div_spi0_pre",
>   		GATE_SCLK_PERIL, 6, CLK_SET_RATE_PARENT, 0),
> +
> +	GATE(CLK_SCLK_UART2, "sclk_uart2", "div_uart2",
> +		GATE_SCLK_PERIL, 2, CLK_SET_RATE_PARENT, 0),
>   	GATE(CLK_SCLK_UART1, "sclk_uart1", "div_uart1",
>   		GATE_SCLK_PERIL, 1, CLK_SET_RATE_PARENT, 0),
>   	GATE(CLK_SCLK_UART0, "sclk_uart0", "div_uart0",
> @@ -648,6 +653,7 @@ static struct samsung_gate_clock gate_clks[] __initdata = {
>   	GATE(CLK_I2C2, "i2c2", "div_aclk_100", GATE_IP_PERIL, 8, 0, 0),
>   	GATE(CLK_I2C1, "i2c1", "div_aclk_100", GATE_IP_PERIL, 7, 0, 0),
>   	GATE(CLK_I2C0, "i2c0", "div_aclk_100", GATE_IP_PERIL, 6, 0, 0),
> +	GATE(CLK_UART2, "uart2", "div_aclk_100", GATE_IP_PERIL, 2, 0, 0),
>   	GATE(CLK_UART1, "uart1", "div_aclk_100", GATE_IP_PERIL, 1, 0, 0),
>   	GATE(CLK_UART0, "uart0", "div_aclk_100", GATE_IP_PERIL, 0, 0, 0),
>   };
> diff --git a/include/dt-bindings/clock/exynos3250.h b/include/dt-bindings/clock/exynos3250.h
> index aab088d30199..89a7d97b002c 100644
> --- a/include/dt-bindings/clock/exynos3250.h
> +++ b/include/dt-bindings/clock/exynos3250.h
> @@ -78,6 +78,7 @@
>   #define CLK_MOUT_CORE			58
>   #define CLK_MOUT_APLL			59
>   #define CLK_MOUT_ACLK_266_SUB		60
> +#define CLK_MOUT_UART2			61
>
>   /* Dividers */
>   #define CLK_DIV_GPL			64
> @@ -126,6 +127,7 @@
>   #define CLK_DIV_CORE			107
>   #define CLK_DIV_HPM			108
>   #define CLK_DIV_COPY			109
> +#define CLK_DIV_UART2			110
>
>   /* Gates */
>   #define CLK_ASYNC_G3D			128
> @@ -222,6 +224,7 @@
>   #define CLK_BLOCK_MFC			219
>   #define CLK_BLOCK_CAM			220
>   #define CLK_SMIES			221
> +#define CLK_UART2			222
>
>   /* Special clocks */
>   #define CLK_SCLK_JPEG			224
> @@ -248,12 +251,13 @@
>   #define CLK_SCLK_SPI0			245
>   #define CLK_SCLK_UART1			246
>   #define CLK_SCLK_UART0			247
> +#define CLK_SCLK_UART2			248
>
>   /*
>    * Total number of clocks of main CMU.
>    * NOTE: Must be equal to last clock ID increased by one.
>    */
> -#define CLK_NR_CLKS			248
> +#define CLK_NR_CLKS			249
>
>   /*
>    * CMU DMC
>

  parent reply	other threads:[~2015-08-17  3:29 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-11  3:46 [PATCH 0/4] ARM: dts: exynos3250: Add UART2 and MMC2 dt node with related clocks Chanwoo Choi
2015-08-11  3:46 ` Chanwoo Choi
2015-08-11  3:46 ` [PATCH 1/4] clk: samsung: exynos3250: Add UART2 clock Chanwoo Choi
2015-08-11  3:46   ` Chanwoo Choi
2015-08-11  3:46   ` Chanwoo Choi
2015-08-17  1:01   ` Krzysztof Kozlowski
2015-08-17  1:01     ` Krzysztof Kozlowski
2015-08-17  3:29   ` Pankaj Dubey [this message]
2015-08-17  3:29     ` [1/4] " Pankaj Dubey
2015-08-11  3:46 ` [PATCH 2/4] clk: samsung: exynos3250: Add MMC2 clock Chanwoo Choi
2015-08-11  3:46   ` Chanwoo Choi
2015-08-11  3:46   ` Chanwoo Choi
2015-08-17  1:48   ` Krzysztof Kozlowski
2015-08-17  1:48     ` Krzysztof Kozlowski
2015-08-11  3:46 ` [PATCH 3/4] ARM: dts: Add UART2 dt node for Exynos3250 SoC Chanwoo Choi
2015-08-11  3:46   ` Chanwoo Choi
2015-08-17  2:11   ` Krzysztof Kozlowski
2015-08-17  2:11     ` Krzysztof Kozlowski
2015-08-17  3:33   ` [3/4] " Pankaj Dubey
2015-08-17  3:33     ` Pankaj Dubey
2015-08-11  3:46 ` [PATCH 4/4] ARM: dts: Add MSHC2 " Chanwoo Choi
2015-08-11  3:46   ` Chanwoo Choi
2015-08-17  2:13   ` Krzysztof Kozlowski
2015-08-17  2:13     ` Krzysztof Kozlowski
2015-08-17  0:33 ` [PATCH 0/4] ARM: dts: exynos3250: Add UART2 and MMC2 dt node with related clocks Krzysztof Kozlowski
2015-08-17  0:33   ` Krzysztof Kozlowski
2015-08-17  0:36   ` Chanwoo Choi
2015-08-17  0:36     ` Chanwoo Choi
2015-08-17  0:37     ` Krzysztof Kozlowski
2015-08-17  0:37       ` Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=55D15522.7080603@samsung.com \
    --to=pankaj.dubey@samsung.com \
    --cc=cw00.choi@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=k.kozlowski@samsung.com \
    --cc=kgene@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=s.nawrocki@samsung.com \
    --cc=sboyd@codeaurora.org \
    --cc=tomasz.figa@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.