From: wangyijing <wangyijing@huawei.com>
To: sparclinux@vger.kernel.org
Subject: Re: bisected: boot hang on sparc64 after PCIe changes
Date: Mon, 17 Aug 2015 08:03:18 +0000 [thread overview]
Message-ID: <55D19546.3030103@huawei.com> (raw)
In-Reply-To: <alpine.LRH.2.20.1508122118210.18637@math.ut.ee>
^[$B:_^[(B 2015/8/17 15:45, Meelis Roos ^[$B<LF;^[(B:
>>> In commit d0751b98dfa391f862e02dc36a233a54615e3f1d "PCI: Add dev->has_secondary_link to track downstream PCIe links"
>>> we assumed the first pcie bridge type is root port, I attached a fix patch which try to avoid a potential NULL pointer,
>>> could you help to test it ?
>>
>> Tested on V245, boots fine with this patch on top of
>> d0751b98dfa391f862e02dc36a233a54615e3f1d and on top of current git.
>>
>> However, there is now nothing under /sys/bus/pci/slots but there were
>> entries for PCI-E slots before (in 4.1.0).
>
> Sorry, I retested cleanly with latest got + your patch, on both V245 and
> T2000 and have one difference. With latest git + patch, the slots
> entries are there, on both V245 and T2000.
Good.
>
>>
>>> Thanks!
>>> Yijing.
>>>
>>>
>>> ^[$B:_^[(B 2015/8/13 16:15, Meelis Roos ^[$B<LF;^[(B:
>>>>> Hi Meelis, could you provide your PCI info on your machine ?
>>>>>
>>>>> lspci -vvv and lspci -tv could help us to find it out.
>>>>
>>>> lspci -vvv:
>>>>
>>>> 0000:02:00.0 PCI bridge: PLX Technology, Inc. PEX 8532 Versatile PCI Express Switch (rev ba) (prog-if 00 [Normal decode])
>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSELúst >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>> Latency: 0, Cache Line Size: 64 bytes
>>>> Region 0: Memory at 00100000 (32-bit, non-prefetchable) [size\x128K]
>>>> Region 1: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Bus: primary\x02, secondary\x03, subordinate
, sec-latency=0
>>>> I/O behind bridge: 00000000-00002fff
>>>> Memory behind bridge: 00200000-04ffffff
>>>> Prefetchable memory behind bridge: fffffffffff00000-00000000000fffff
>>>> Secondary status: 66MHz- FastB2B- ParErr- DEVSELúst >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>>>> [virtual] Expansion ROM at fffff80700000000 [disabled]
>>>> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>>>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>>>> Capabilities: [40] Power Management version 1
>>>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>>>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>>> Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
>>>> Address: 0000000000000000 Data: 0000
>>>> Capabilities: [68] Express (v1) Upstream Port, MSI 00
>>>> DevCap: MaxPayload 256 bytes, PhantFunc 0
>>>> ExtTag- AttnBtn- AttnInd- PwrInd- RBE- SlotPowerLimit 0.000W
>>>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>>>> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>>>> MaxPayload 128 bytes, MaxReadReq 128 bytes
>>>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>>>> LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, Exit Latency L0s <512ns, L1 <32us
>>>> ClockPM- Surprise- LLActRep- BwNot-
>>>> LnkCtl: ASPM Disabled; Disabled- CommClk-
>>>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>>> LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>>>> Capabilities: [100 v1] Device Serial Number 00-00-00-01-00-00-0e-df
>>>> Capabilities: [fb4 v1] Advanced Error Reporting
>>>> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>>>> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>>>> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>>>> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>>>> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>>>> AERCap: First Error Pointer: 1f, GenCap+ CGenEn- ChkCap+ ChkEn-
>>>> Capabilities: [138 v1] Power Budgeting <?>
>>>> Capabilities: [148 v1] Virtual Channel
>>>> Caps: LPEVC=0 RefClk\x100ns PATEntryBits=1
>>>> Arb: Fixed+ WRR32+ WRR64- WRR128-
>>>> Ctrl: ArbSelect=Fixed
>>>> Status: InProgress+
>>>> Port Arbitration Table [1b8] <?>
>>>> VC0: Caps: PATOffset\0 MaxTimeSlots=1 RejSnoopTrans-
>>>> Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
>>>> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VCÿ
>>>> Status: NegoPending- InProgress-
>>>> VC1: Caps: PATOffset\0 MaxTimeSlots=1 RejSnoopTrans-
>>>> Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
>>>> Ctrl: Enable- ID=1 ArbSelect=Fixed TC/VC\0
>>>> Status: NegoPending- InProgress-
>>>>
>>>> 0000:03:01.0 PCI bridge: PLX Technology, Inc. PEX 8532 Versatile PCI Express Switch (rev ba) (prog-if 00 [Normal decode])
>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSELúst >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>> Latency: 0, Cache Line Size: 64 bytes
>>>> Region 0: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Region 1: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Bus: primary\x03, secondary\x04, subordinate\x05, sec-latency=0
>>>> I/O behind bridge: 00000000-00001fff
>>>> Memory behind bridge: 00200000-03ffffff
>>>> Prefetchable memory behind bridge: fffffffffff00000-00000000000fffff
>>>> Secondary status: 66MHz- FastB2B- ParErr- DEVSELúst >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>>>> [virtual] Expansion ROM at fffff80700000000 [disabled]
>>>> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>>>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>>>> Capabilities: [40] Power Management version 1
>>>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>>>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>>> Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
>>>> Address: 0000000000000000 Data: 0000
>>>> Capabilities: [68] Express (v1) Downstream Port (Slot-), MSI 00
>>>> DevCap: MaxPayload 256 bytes, PhantFunc 0
>>>> ExtTag- RBE-
>>>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>>>> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>>>> MaxPayload 128 bytes, MaxReadReq 128 bytes
>>>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>>>> LnkCap: Port #1, Speed 2.5GT/s, Width x4, ASPM L0s L1, Exit Latency L0s <512ns, L1 <32us
>>>> ClockPM- Surprise- LLActRep- BwNot-
>>>> LnkCtl: ASPM Disabled; Disabled- CommClk-
>>>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>>> LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>>>> Capabilities: [100 v1] Device Serial Number 00-00-00-01-00-00-0e-df
>>>> Capabilities: [fb4 v1] Advanced Error Reporting
>>>> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>>>> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>>>> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>>>> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>>>> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>>>> AERCap: First Error Pointer: 1f, GenCap+ CGenEn- ChkCap+ ChkEn-
>>>> Capabilities: [138 v1] Power Budgeting <?>
>>>> Capabilities: [148 v1] Virtual Channel
>>>> Caps: LPEVC=0 RefClk\x100ns PATEntryBits=1
>>>> Arb: Fixed+ WRR32+ WRR64- WRR128-
>>>> Ctrl: ArbSelect=Fixed
>>>> Status: InProgress+
>>>> Port Arbitration Table [1b8] <?>
>>>> VC0: Caps: PATOffset\0 MaxTimeSlots=1 RejSnoopTrans-
>>>> Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
>>>> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VCÿ
>>>> Status: NegoPending- InProgress-
>>>> VC1: Caps: PATOffset\0 MaxTimeSlots=1 RejSnoopTrans-
>>>> Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
>>>> Ctrl: Enable- ID=1 ArbSelect=Fixed TC/VC\0
>>>> Status: NegoPending- InProgress-
>>>>
>>>> 0000:03:02.0 PCI bridge: PLX Technology, Inc. PEX 8532 Versatile PCI Express Switch (rev ba) (prog-if 00 [Normal decode])
>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSELúst >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>> Latency: 0, Cache Line Size: 64 bytes
>>>> Region 0: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Region 1: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Bus: primary\x03, secondary\x06, subordinate\x06, sec-latency=0
>>>> I/O behind bridge: 00002000-00001fff
>>>> Memory behind bridge: fff00000-000fffff
>>>> Prefetchable memory behind bridge: fffffffffff00000-00000000000fffff
>>>> Secondary status: 66MHz- FastB2B- ParErr- DEVSELúst >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>>>> [virtual] Expansion ROM at fffff80700000000 [disabled]
>>>> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>>>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>>>> Capabilities: [40] Power Management version 1
>>>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>>>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>>> Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
>>>> Address: 0000000000000000 Data: 0000
>>>> Capabilities: [68] Express (v1) Downstream Port (Slot+), MSI 00
>>>> DevCap: MaxPayload 256 bytes, PhantFunc 0
>>>> ExtTag- RBE-
>>>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>>>> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>>>> MaxPayload 128 bytes, MaxReadReq 128 bytes
>>>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>>>> LnkCap: Port #2, Speed 2.5GT/s, Width x4, ASPM L0s L1, Exit Latency L0s <512ns, L1 <32us
>>>> ClockPM- Surprise- LLActRep- BwNot-
>>>> LnkCtl: ASPM Disabled; Disabled- CommClk-
>>>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>>> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>>>> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
>>>> Slot #226, PowerLimit 25.000W; Interlock- NoCompl-
>>>> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>>>> Control: AttnInd Off, PwrInd On, Power- Interlock-
>>>> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
>>>> Changed: MRL- PresDet- LinkState-
>>>> Capabilities: [100 v1] Device Serial Number 00-00-00-01-00-00-0e-df
>>>> Capabilities: [fb4 v1] Advanced Error Reporting
>>>> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>>>> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>>>> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>>>> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>>>> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>>>> AERCap: First Error Pointer: 1f, GenCap+ CGenEn- ChkCap+ ChkEn-
>>>> Capabilities: [138 v1] Power Budgeting <?>
>>>> Capabilities: [148 v1] Virtual Channel
>>>> Caps: LPEVC=0 RefClk\x100ns PATEntryBits=1
>>>> Arb: Fixed+ WRR32+ WRR64- WRR128-
>>>> Ctrl: ArbSelect=Fixed
>>>> Status: InProgress+
>>>> Port Arbitration Table [1b8] <?>
>>>> VC0: Caps: PATOffset\0 MaxTimeSlots=1 RejSnoopTrans-
>>>> Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
>>>> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VCÿ
>>>> Status: NegoPending+ InProgress-
>>>> VC1: Caps: PATOffset\0 MaxTimeSlots=1 RejSnoopTrans-
>>>> Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
>>>> Ctrl: Enable- ID=1 ArbSelect=Fixed TC/VC\0
>>>> Status: NegoPending- InProgress-
>>>>
>>>> 0000:03:08.0 PCI bridge: PLX Technology, Inc. PEX 8532 Versatile PCI Express Switch (rev ba) (prog-if 00 [Normal decode])
>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSELúst >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>> Latency: 0, Cache Line Size: 64 bytes
>>>> Region 0: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Region 1: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Bus: primary\x03, secondary\a, subordinate\a, sec-latency=0
>>>> I/O behind bridge: 00002000-00001fff
>>>> Memory behind bridge: fff00000-000fffff
>>>> Prefetchable memory behind bridge: fffffffffff00000-00000000000fffff
>>>> Secondary status: 66MHz- FastB2B- ParErr- DEVSELúst >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>>>> [virtual] Expansion ROM at fffff80700000000 [disabled]
>>>> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>>>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>>>> Capabilities: [40] Power Management version 1
>>>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>>>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>>> Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
>>>> Address: 0000000000000000 Data: 0000
>>>> Capabilities: [68] Express (v1) Downstream Port (Slot+), MSI 00
>>>> DevCap: MaxPayload 256 bytes, PhantFunc 0
>>>> ExtTag- RBE-
>>>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>>>> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>>>> MaxPayload 128 bytes, MaxReadReq 128 bytes
>>>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>>>> LnkCap: Port #8, Speed 2.5GT/s, Width x8, ASPM L0s L1, Exit Latency L0s <512ns, L1 <32us
>>>> ClockPM- Surprise- LLActRep- BwNot-
>>>> LnkCtl: ASPM Disabled; Disabled- CommClk-
>>>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>>> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>>>> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
>>>> Slot #224, PowerLimit 25.000W; Interlock- NoCompl-
>>>> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>>>> Control: AttnInd Off, PwrInd On, Power- Interlock-
>>>> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
>>>> Changed: MRL- PresDet- LinkState-
>>>> Capabilities: [100 v1] Device Serial Number 00-00-00-01-00-00-0e-df
>>>> Capabilities: [fb4 v1] Advanced Error Reporting
>>>> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>>>> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>>>> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>>>> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>>>> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>>>> AERCap: First Error Pointer: 1f, GenCap+ CGenEn- ChkCap+ ChkEn-
>>>> Capabilities: [138 v1] Power Budgeting <?>
>>>> Capabilities: [148 v1] Virtual Channel
>>>> Caps: LPEVC=0 RefClk\x100ns PATEntryBits=1
>>>> Arb: Fixed+ WRR32+ WRR64- WRR128-
>>>> Ctrl: ArbSelect=Fixed
>>>> Status: InProgress+
>>>> Port Arbitration Table [1b8] <?>
>>>> VC0: Caps: PATOffset\0 MaxTimeSlots=1 RejSnoopTrans-
>>>> Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
>>>> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VCÿ
>>>> Status: NegoPending+ InProgress-
>>>> VC1: Caps: PATOffset\0 MaxTimeSlots=1 RejSnoopTrans-
>>>> Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
>>>> Ctrl: Enable- ID=1 ArbSelect=Fixed TC/VC\0
>>>> Status: NegoPending- InProgress-
>>>>
>>>> 0000:03:09.0 PCI bridge: PLX Technology, Inc. PEX 8532 Versatile PCI Express Switch (rev ba) (prog-if 00 [Normal decode])
>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSELúst >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>> Latency: 0, Cache Line Size: 64 bytes
>>>> Region 0: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Region 1: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Bus: primary\x03, secondary\b, subordinate
, sec-latency=0
>>>> I/O behind bridge: 00002000-00001fff
>>>> Memory behind bridge: 04000000-045fffff
>>>> Prefetchable memory behind bridge: fffffffffff00000-00000000000fffff
>>>> Secondary status: 66MHz- FastB2B- ParErr- DEVSELúst >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>>>> [virtual] Expansion ROM at fffff80700000000 [disabled]
>>>> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>>>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>>>> Capabilities: [40] Power Management version 1
>>>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>>>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>>> Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
>>>> Address: 0000000000000000 Data: 0000
>>>> Capabilities: [68] Express (v1) Downstream Port (Slot-), MSI 00
>>>> DevCap: MaxPayload 256 bytes, PhantFunc 0
>>>> ExtTag- RBE-
>>>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>>>> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>>>> MaxPayload 128 bytes, MaxReadReq 128 bytes
>>>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>>>> LnkCap: Port #9, Speed 2.5GT/s, Width x4, ASPM L0s L1, Exit Latency L0s <512ns, L1 <32us
>>>> ClockPM- Surprise- LLActRep- BwNot-
>>>> LnkCtl: ASPM Disabled; Disabled- CommClk-
>>>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>>> LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>>>> Capabilities: [100 v1] Device Serial Number 00-00-00-01-00-00-0e-df
>>>> Capabilities: [fb4 v1] Advanced Error Reporting
>>>> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>>>> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>>>> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>>>> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>>>> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>>>> AERCap: First Error Pointer: 1f, GenCap+ CGenEn- ChkCap+ ChkEn-
>>>> Capabilities: [138 v1] Power Budgeting <?>
>>>> Capabilities: [148 v1] Virtual Channel
>>>> Caps: LPEVC=0 RefClk\x100ns PATEntryBits=1
>>>> Arb: Fixed+ WRR32+ WRR64- WRR128-
>>>> Ctrl: ArbSelect=Fixed
>>>> Status: InProgress+
>>>> Port Arbitration Table [1b8] <?>
>>>> VC0: Caps: PATOffset\0 MaxTimeSlots=1 RejSnoopTrans-
>>>> Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
>>>> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VCÿ
>>>> Status: NegoPending- InProgress-
>>>> VC1: Caps: PATOffset\0 MaxTimeSlots=1 RejSnoopTrans-
>>>> Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
>>>> Ctrl: Enable- ID=1 ArbSelect=Fixed TC/VC\0
>>>> Status: NegoPending- InProgress-
>>>>
>>>> 0000:03:0a.0 PCI bridge: PLX Technology, Inc. PEX 8532 Versatile PCI Express Switch (rev ba) (prog-if 00 [Normal decode])
>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSELúst >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>> Latency: 0, Cache Line Size: 64 bytes
>>>> Region 0: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Region 1: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Bus: primary\x03, secondary\v, subordinate
, sec-latency=0
>>>> I/O behind bridge: 00002000-00002fff
>>>> Memory behind bridge: 04600000-04ffffff
>>>> Prefetchable memory behind bridge: fffffffffff00000-00000000000fffff
>>>> Secondary status: 66MHz- FastB2B- ParErr- DEVSELúst >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>>>> [virtual] Expansion ROM at fffff80700000000 [disabled]
>>>> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>>>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>>>> Capabilities: [40] Power Management version 1
>>>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>>>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>>> Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
>>>> Address: 0000000000000000 Data: 0000
>>>> Capabilities: [68] Express (v1) Downstream Port (Slot-), MSI 00
>>>> DevCap: MaxPayload 256 bytes, PhantFunc 0
>>>> ExtTag- RBE-
>>>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>>>> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>>>> MaxPayload 128 bytes, MaxReadReq 128 bytes
>>>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>>>> LnkCap: Port #10, Speed 2.5GT/s, Width x4, ASPM L0s L1, Exit Latency L0s <512ns, L1 <32us
>>>> ClockPM- Surprise- LLActRep- BwNot-
>>>> LnkCtl: ASPM Disabled; Disabled- CommClk-
>>>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>>> LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>>>> Capabilities: [100 v1] Device Serial Number 00-00-00-01-00-00-0e-df
>>>> Capabilities: [fb4 v1] Advanced Error Reporting
>>>> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>>>> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>>>> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>>>> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>>>> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>>>> AERCap: First Error Pointer: 1f, GenCap+ CGenEn- ChkCap+ ChkEn-
>>>> Capabilities: [138 v1] Power Budgeting <?>
>>>> Capabilities: [148 v1] Virtual Channel
>>>> Caps: LPEVC=0 RefClk\x100ns PATEntryBits=1
>>>> Arb: Fixed+ WRR32+ WRR64- WRR128-
>>>> Ctrl: ArbSelect=Fixed
>>>> Status: InProgress+
>>>> Port Arbitration Table [1b8] <?>
>>>> VC0: Caps: PATOffset\0 MaxTimeSlots=1 RejSnoopTrans-
>>>> Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
>>>> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VCÿ
>>>> Status: NegoPending- InProgress-
>>>> VC1: Caps: PATOffset\0 MaxTimeSlots=1 RejSnoopTrans-
>>>> Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
>>>> Ctrl: Enable- ID=1 ArbSelect=Fixed TC/VC\0
>>>> Status: NegoPending- InProgress-
>>>>
>>>> 0000:04:00.0 PCI bridge: ULi Electronics Inc. M5249 HTT to PCI Bridge (prog-if 00 [Normal decode])
>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSELúst >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
>>>> Latency: 0, Cache Line Size: 64 bytes
>>>> Region 0: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Region 1: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Bus: primary\x04, secondary\x05, subordinate\x05, sec-latency=0
>>>> I/O behind bridge: 00001000-00001fff
>>>> Memory behind bridge: 00200000-03ffffff
>>>> Prefetchable memory behind bridge: fff00000-000fffff
>>>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>>>> [virtual] Expansion ROM at fffff80700000000 [disabled]
>>>> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>>>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>>>> Capabilities: [90] Power Management version 2
>>>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>>>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>>> Capabilities: [98] Express (v1) PCI-Express to PCI/PCI-X Bridge, MSI 00
>>>> DevCap: MaxPayload 128 bytes, PhantFunc 0
>>>> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE-
>>>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>>>> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry-
>>>> MaxPayload 128 bytes, MaxReadReq 512 bytes
>>>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>>>> LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Exit Latency L0s <2us, L1 <32us
>>>> ClockPM- Surprise- LLActRep- BwNot-
>>>> LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- CommClk-
>>>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>>> LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>>>>
>>>> 0000:05:1c.0 USB controller: ULi Electronics Inc. USB 1.1 Controller (rev 03) (prog-if 10 [OHCI])
>>>> Subsystem: ULi Electronics Inc. ASRock 939Dual-SATA2 Motherboard
>>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>>>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>> Latency: 64 (20000ns max), Cache Line Size: 64 bytes
>>>> Interrupt: pin A routed to IRQ 5
>>>> Region 0: Memory at 01000000 (32-bit, non-prefetchable) [size\x16M]
>>>> Region 1: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Region 2: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Region 3: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Region 4: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Region 5: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> [virtual] Expansion ROM at fffff80700000000 [disabled]
>>>> Capabilities: [60] Power Management version 2
>>>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>>>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>>> Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit-
>>>> Address: 00000000 Data: 0000
>>>> Kernel driver in use: ohci-pci
>>>>
>>>> 0000:05:1c.1 USB controller: ULi Electronics Inc. USB 1.1 Controller (rev 03) (prog-if 10 [OHCI])
>>>> Subsystem: ULi Electronics Inc. ASRock 939Dual-SATA2 Motherboard
>>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>>>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>> Latency: 64 (20000ns max), Cache Line Size: 64 bytes
>>>> Interrupt: pin B routed to IRQ 5
>>>> Region 0: Memory at 02000000 (32-bit, non-prefetchable) [size\x16M]
>>>> Region 1: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Region 2: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Region 3: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Region 4: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Region 5: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> [virtual] Expansion ROM at fffff80700000000 [disabled]
>>>> Capabilities: [60] Power Management version 2
>>>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>>>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
>>>> Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit-
>>>> Address: 00000000 Data: 0000
>>>> Kernel driver in use: ohci-pci
>>>>
>>>> 0000:05:1c.3 USB controller: ULi Electronics Inc. USB 2.0 Controller (rev 01) (prog-if 20 [EHCI])
>>>> Subsystem: ULi Electronics Inc. Device 5238
>>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>>>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>> Latency: 64 (4000ns min, 8000ns max), Cache Line Size: 64 bytes
>>>> Interrupt: pin D routed to IRQ 6
>>>> Region 0: Memory at 00200000 (32-bit, non-prefetchable) [size=8K]
>>>> Region 1: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Region 2: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Region 3: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Region 4: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Region 5: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> [virtual] Expansion ROM at fffff80700000000 [disabled]
>>>> Capabilities: [50] Power Management version 2
>>>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>>>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>>> Capabilities: [58] Debug port: BAR=1 offset\090
>>>> Capabilities: [78] MSI: Enable- Count=1/1 Maskable- 64bit-
>>>> Address: 00000000 Data: 0000
>>>> Kernel driver in use: ehci-pci
>>>>
>>>> 0000:05:1e.0 ISA bridge: ULi Electronics Inc. M1575 South Bridge
>>>> Subsystem: ULi Electronics Inc. M1575 South Bridge
>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>>>> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>> Latency: 64 (250ns min, 6000ns max)
>>>> Region 0: [virtual] I/O ports at 0000 [size=4K]
>>>> Region 1: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Region 2: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Region 3: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Region 4: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Region 5: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> [virtual] Expansion ROM at fffff80700000000 [disabled]
>>>>
>>>> 0000:05:1f.0 IDE interface: ULi Electronics Inc. M5229 IDE (rev c8) (prog-if 8f [Master SecP SecO PriP PriO])
>>>> Subsystem: ULi Electronics Inc. M5229 IDE
>>>> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>>>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>> Latency: 64, Cache Line Size: 64 bytes
>>>> Interrupt: pin A routed to IRQ 7
>>>> Region 0: I/O ports at 1040 [sized]
>>>> Region 1: I/O ports at 1080 [sized]
>>>> Region 2: I/O ports at 10c0 [sized]
>>>> Region 3: I/O ports at 1100 [sized]
>>>> Region 4: I/O ports at 1000 [sized]
>>>> Region 5: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> [virtual] Expansion ROM at fffff80700000000 [disabled]
>>>> Capabilities: [60] Power Management version 2
>>>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>>>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>>> Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
>>>> Address: 00000000 Data: 0000
>>>> Kernel driver in use: pata_ali
>>>>
>>>> 0000:08:00.0 PCI bridge: Broadcom EPB PCI-Express to PCI-X Bridge (rev b5) (prog-if 00 [Normal decode])
>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSELúst >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>> Latency: 0, Cache Line Size: 64 bytes
>>>> Region 0: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Region 1: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Bus: primary\b, secondary , subordinate
, sec-latencyd
>>>> I/O behind bridge: 00002000-00001fff
>>>> Memory behind bridge: 04000000-045fffff
>>>> Prefetchable memory behind bridge: fffffffffff00000-00000000000fffff
>>>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>>>> [virtual] Expansion ROM at fffff80700000000 [disabled]
>>>> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>>>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>>>> Capabilities: [60] Express (v1) PCI-Express to PCI/PCI-X Bridge, MSI 00
>>>> DevCap: MaxPayload 128 bytes, PhantFunc 0
>>>> ExtTag+ AttnBtn+ AttnInd+ PwrInd+ RBE-
>>>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>>>> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry-
>>>> MaxPayload 128 bytes, MaxReadReq 128 bytes
>>>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>>>> LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Exit Latency L0s <4us, L1 <4us
>>>> ClockPM- Surprise- LLActRep- BwNot-
>>>> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
>>>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>>> LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>>>> Capabilities: [90] PCI-X bridge device
>>>> Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq\x133MHz
>>>> Status: Dev\b:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
>>>> Upstream: Capacity=0 CommitmentLimit=0
>>>> Downstream: Capacity=0 CommitmentLimit=0
>>>> Capabilities: [b0] Power Management version 2
>>>> Flags: PMEClk- DSI- D1- D2- AuxCurrent75mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>>>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>>> Capabilities: [100 v1] Advanced Error Reporting
>>>> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>>>> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>>>> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>>>> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>>>> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>>>> AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
>>>> Capabilities: [14c v1] Power Budgeting <?>
>>>>
>>>> 0000:09:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5714 Gigabit Ethernet (rev a3)
>>>> Subsystem: Oracle/SUN Device 1668
>>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>>>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>> Latency: 64 (16000ns min), Cache Line Size: 64 bytes
>>>> Interrupt: pin A routed to IRQ 91
>>>> Region 0: Memory at 04200000 (64-bit, non-prefetchable) [size=2M]
>>>> Region 2: Memory at 04010000 (64-bit, non-prefetchable) [sizedK]
>>>> Region 4: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Region 5: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Expansion ROM at 04020000 [disabled] [sizedK]
>>>> Capabilities: [40] PCI-X non-bridge device
>>>> Command: DPERE- ERO- RBCQ2 OST=1
>>>> Status: Dev :04.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC 48 DMOST=1 DMCRS\x16 RSCEM- 266MHz- 533MHz-
>>>> Capabilities: [48] Power Management version 2
>>>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
>>>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
>>>> Capabilities: [50] Vital Product Data
>>>> Product Name: Broadcom NetXtreme Gigabit Ethernet Controller
>>>> Read-only fields:
>>>> [PN] Part number: BCM95714
>>>> [EC] Engineering changes: 106679-15
>>>> [SN] Serial number: 0123456789
>>>> [MN] Manufacture ID: 31 34 65 34
>>>> [RV] Reserved: checksum bad, 28 byte(s) reserved
>>>> Read/write fields:
>>>> [YA] Asset tag: XYZ01234567
>>>> [RW] Read-write area: 107 byte(s) free
>>>> End
>>>> Capabilities: [58] MSI: Enable+ Count=1/8 Maskable- 64bit+
>>>> Address: 00000003ffff0000 Data: 0000
>>>> Kernel driver in use: tg3
>>>>
>>>> 0000:09:04.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5714 Gigabit Ethernet (rev a3)
>>>> Subsystem: Oracle/SUN Device 1668
>>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>>>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>> Latency: 64 (16000ns min), Cache Line Size: 64 bytes
>>>> Interrupt: pin B routed to IRQ 8
>>>> Region 0: Memory at 04400000 (64-bit, non-prefetchable) [size=2M]
>>>> Region 2: Memory at 04030000 (64-bit, non-prefetchable) [sizedK]
>>>> Region 4: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Region 5: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> [virtual] Expansion ROM at fffff80700000000 [disabled]
>>>> Capabilities: [40] PCI-X non-bridge device
>>>> Command: DPERE- ERO+ RBCQ2 OST=1
>>>> Status: Dev :04.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC 48 DMOST=1 DMCRS\x16 RSCEM- 266MHz- 533MHz-
>>>> Capabilities: [48] Power Management version 2
>>>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
>>>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
>>>> Capabilities: [50] Vital Product Data
>>>> Product Name: Broadcom NetXtreme Gigabit Ethernet Controller
>>>> Read-only fields:
>>>> [PN] Part number: BCM95714
>>>> [EC] Engineering changes: 106679-15
>>>> [SN] Serial number: 0123456789
>>>> [MN] Manufacture ID: 31 34 65 34
>>>> [RV] Reserved: checksum bad, 28 byte(s) reserved
>>>> Read/write fields:
>>>> [YA] Asset tag: XYZ01234567
>>>> [RW] Read-write area: 107 byte(s) free
>>>> End
>>>> Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
>>>> Address: 932c4922702691c0 Data: 15db
>>>> Kernel driver in use: tg3
>>>>
>>>> 0000:09:08.0 PCI bridge: Broadcom BCM5785 [HT1000] PCI/PCI-X Bridge (rev b4) (prog-if 00 [Normal decode])
>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>>>> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>> Latency: 64, Cache Line Size: 64 bytes
>>>> Region 0: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Region 1: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Bus: primary , secondary
, subordinate
, sec-latencyd
>>>> I/O behind bridge: 00002000-00001fff
>>>> Memory behind bridge: fff00000-000fffff
>>>> Prefetchable memory behind bridge: fffffffffff00000-00000000000fffff
>>>> Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>>>> [virtual] Expansion ROM at fffff80700000000 [disabled]
>>>> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>>>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>>>> Capabilities: [90] PCI-X bridge device
>>>> Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv
>>>> Status: Dev :08.0 64bit+ 133MHz+ SCD- USC- SCO- SRD-
>>>> Upstream: Capacity=8 CommitmentLimit=8
>>>> Downstream: Capacity=8 CommitmentLimit=8
>>>>
>>>> 0000:0b:00.0 PCI bridge: Broadcom EPB PCI-Express to PCI-X Bridge (rev b5) (prog-if 00 [Normal decode])
>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSELúst >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>> Latency: 0, Cache Line Size: 64 bytes
>>>> Region 0: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Region 1: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Bus: primary\v, secondary\f, subordinate
, sec-latencyd
>>>> I/O behind bridge: 00002000-00002fff
>>>> Memory behind bridge: 04600000-04ffffff
>>>> Prefetchable memory behind bridge: fffffffffff00000-00000000000fffff
>>>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>>>> [virtual] Expansion ROM at fffff80700000000 [disabled]
>>>> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>>>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>>>> Capabilities: [60] Express (v1) PCI-Express to PCI/PCI-X Bridge, MSI 00
>>>> DevCap: MaxPayload 128 bytes, PhantFunc 0
>>>> ExtTag+ AttnBtn+ AttnInd+ PwrInd+ RBE-
>>>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>>>> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry-
>>>> MaxPayload 128 bytes, MaxReadReq 128 bytes
>>>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>>>> LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Exit Latency L0s <4us, L1 <4us
>>>> ClockPM- Surprise- LLActRep- BwNot-
>>>> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
>>>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>>> LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>>>> Capabilities: [90] PCI-X bridge device
>>>> Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq\x133MHz
>>>> Status: Dev\v:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
>>>> Upstream: Capacity=0 CommitmentLimit=0
>>>> Downstream: Capacity=0 CommitmentLimit=0
>>>> Capabilities: [b0] Power Management version 2
>>>> Flags: PMEClk- DSI- D1- D2- AuxCurrent75mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>>>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>>> Capabilities: [100 v1] Advanced Error Reporting
>>>> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>>>> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>>>> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>>>> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>>>> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>>>> AERCap: First Error Pointer: 04, GenCap- CGenEn- ChkCap- ChkEn-
>>>> Capabilities: [14c v1] Power Budgeting <?>
>>>>
>>>> 0000:0c:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5714 Gigabit Ethernet (rev a3)
>>>> Subsystem: Oracle/SUN Device 1668
>>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>>>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>> Latency: 64 (16000ns min), Cache Line Size: 64 bytes
>>>> Interrupt: pin A routed to IRQ 8
>>>> Region 0: Memory at 04800000 (64-bit, non-prefetchable) [size=2M]
>>>> Region 2: Memory at 04610000 (64-bit, non-prefetchable) [sizedK]
>>>> Region 4: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Region 5: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Expansion ROM at 04620000 [disabled] [sizedK]
>>>> Capabilities: [40] PCI-X non-bridge device
>>>> Command: DPERE- ERO+ RBCQ2 OST=1
>>>> Status: Dev\f:04.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC 48 DMOST=1 DMCRS\x16 RSCEM- 266MHz- 533MHz-
>>>> Capabilities: [48] Power Management version 2
>>>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
>>>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
>>>> Capabilities: [50] Vital Product Data
>>>> Product Name: Broadcom NetXtreme Gigabit Ethernet Controller
>>>> Read-only fields:
>>>> [PN] Part number: BCM95714
>>>> [EC] Engineering changes: 106679-15
>>>> [SN] Serial number: 0123456789
>>>> [MN] Manufacture ID: 31 34 65 34
>>>> [RV] Reserved: checksum bad, 28 byte(s) reserved
>>>> Read/write fields:
>>>> [YA] Asset tag: XYZ01234567
>>>> [RW] Read-write area: 107 byte(s) free
>>>> End
>>>> Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
>>>> Address: f7b9f7ebfbbbffa8 Data: fc80
>>>> Kernel driver in use: tg3
>>>>
>>>> 0000:0c:04.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5714 Gigabit Ethernet (rev a3)
>>>> Subsystem: Oracle/SUN Device 1668
>>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>>>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>> Latency: 64 (16000ns min), Cache Line Size: 64 bytes
>>>> Interrupt: pin B routed to IRQ 9
>>>> Region 0: Memory at 04a00000 (64-bit, non-prefetchable) [size=2M]
>>>> Region 2: Memory at 04630000 (64-bit, non-prefetchable) [sizedK]
>>>> Region 4: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Region 5: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> [virtual] Expansion ROM at fffff80700000000 [disabled]
>>>> Capabilities: [40] PCI-X non-bridge device
>>>> Command: DPERE- ERO+ RBCQ2 OST=1
>>>> Status: Dev\f:04.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC 48 DMOST=1 DMCRS\x16 RSCEM- 266MHz- 533MHz-
>>>> Capabilities: [48] Power Management version 2
>>>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
>>>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
>>>> Capabilities: [50] Vital Product Data
>>>> Product Name: Broadcom NetXtreme Gigabit Ethernet Controller
>>>> Read-only fields:
>>>> [PN] Part number: BCM95714
>>>> [EC] Engineering changes: 106679-15
>>>> [SN] Serial number: 0123456789
>>>> [MN] Manufacture ID: 31 34 65 34
>>>> [RV] Reserved: checksum bad, 28 byte(s) reserved
>>>> Read/write fields:
>>>> [YA] Asset tag: XYZ01234567
>>>> [RW] Read-write area: 107 byte(s) free
>>>> End
>>>> Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
>>>> Address: ffec4e39bb357b78 Data: e4ef
>>>> Kernel driver in use: tg3
>>>>
>>>> 0000:0c:08.0 PCI bridge: Broadcom BCM5785 [HT1000] PCI/PCI-X Bridge (rev b4) (prog-if 00 [Normal decode])
>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>>>> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>> Latency: 64, Cache Line Size: 64 bytes
>>>> Region 0: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Region 1: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Bus: primary\f, secondary
, subordinate
, sec-latencyd
>>>> I/O behind bridge: 00002000-00002fff
>>>> Memory behind bridge: 04c00000-04ffffff
>>>> Prefetchable memory behind bridge: fffffffffff00000-00000000000fffff
>>>> Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>>>> [virtual] Expansion ROM at fffff80700000000 [disabled]
>>>> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>>>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>>>> Capabilities: [90] PCI-X bridge device
>>>> Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv
>>>> Status: Dev\f:08.0 64bit+ 133MHz+ SCD- USC- SCO+ SRD-
>>>> Upstream: Capacity=8 CommitmentLimit=8
>>>> Downstream: Capacity=8 CommitmentLimit=8
>>>>
>>>> 0000:0d:01.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1064 PCI-X Fusion-MPT SAS (rev 02)
>>>> Subsystem: LSI Logic / Symbios Logic Device 3020
>>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>> Latency: 248 (16000ns min, 2500ns max), Cache Line Size: 512 bytes
>>>> Interrupt: pin A routed to IRQ 10
>>>> Region 0: I/O ports at 2000 [disabled] [size%6]
>>>> Region 1: Memory at 04c00000 (64-bit, non-prefetchable) [sizedK]
>>>> Region 3: Memory at 04c10000 (64-bit, non-prefetchable) [sizedK]
>>>> Region 5: [virtual] Memory at fffff80700000000 (32-bit, non-prefetchable)
>>>> Expansion ROM at 04e00000 [disabled] [size=2M]
>>>> Capabilities: [50] Power Management version 2
>>>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>>>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>>> Capabilities: [98] MSI: Enable- Count=1/1 Maskable- 64bit+
>>>> Address: 0000000000000000 Data: 0000
>>>> Capabilities: [68] PCI-X non-bridge device
>>>> Command: DPERE- ERO- RBCQ2 OST\x16
>>>> Status: Dev
:01.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC 48 DMOST\x16 DMCRS\x128 RSCEM- 266MHz- 533MHz-
>>>> Kernel driver in use: mptsas
>>>>
>>>> 0001:02:00.0 PCI bridge: Intel Corporation 41210 [Lanai] Serial to Parallel PCI Bridge (A-Segment Bridge) (rev 09) (prog-if 00 [Normal decode])
>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSELúst >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>> Latency: 0, Cache Line Size: 64 bytes
>>>> Region 0: [virtual] Memory at fffff80900000000 (32-bit, non-prefetchable)
>>>> Region 1: [virtual] Memory at fffff80900000000 (32-bit, non-prefetchable)
>>>> Bus: primary\x02, secondary\x03, subordinate\x03, sec-latencyd
>>>> I/O behind bridge: 00000000-00000fff
>>>> Memory behind bridge: 00100000-001fffff
>>>> Prefetchable memory behind bridge: fffffffffff00000-00000000000fffff
>>>> Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>>>> [virtual] Expansion ROM at fffff80900000000 [disabled]
>>>> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>>>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>>>> Capabilities: [44] Express (v1) PCI-Express to PCI/PCI-X Bridge, MSI 00
>>>> DevCap: MaxPayload 256 bytes, PhantFunc 0
>>>> ExtTag- AttnBtn- AttnInd- PwrInd- RBE-
>>>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>>>> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry-
>>>> MaxPayload 128 bytes, MaxReadReq 512 bytes
>>>> DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
>>>> LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s, Exit Latency L0s unlimited, L1 unlimited
>>>> ClockPM- Surprise- LLActRep- BwNot-
>>>> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
>>>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>>> LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
>>>> Capabilities: [5c] MSI: Enable- Count=1/1 Maskable- 64bit+
>>>> Address: 0000000000000000 Data: 0000
>>>> Capabilities: [6c] Power Management version 2
>>>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>>>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>>> Capabilities: [d8] PCI-X bridge device
>>>> Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq\x133MHz
>>>> Status: Dev\x02:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
>>>> Upstream: Capacitye535 CommitmentLimite535
>>>> Downstream: Capacitye535 CommitmentLimite535
>>>> Capabilities: [100 v1] Advanced Error Reporting
>>>> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
>>>> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>>>> UESvrt: DLP+ SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>>>> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>>>> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>>>> AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-
>>>> Capabilities: [300 v1] Power Budgeting <?>
>>>>
>>>> 0001:02:00.2 PCI bridge: Intel Corporation 41210 [Lanai] Serial to Parallel PCI Bridge (B-Segment Bridge) (rev 09) (prog-if 00 [Normal decode])
>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSELúst >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>> Latency: 0, Cache Line Size: 64 bytes
>>>> Region 0: [virtual] Memory at fffff80900000000 (32-bit, non-prefetchable)
>>>> Region 1: [virtual] Memory at fffff80900000000 (32-bit, non-prefetchable)
>>>> Bus: primary\x02, secondary\x04, subordinate\x04, sec-latencyd
>>>> I/O behind bridge: 00001000-00000fff
>>>> Memory behind bridge: fff00000-000fffff
>>>> Prefetchable memory behind bridge: fffffffffff00000-00000000000fffff
>>>> Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>>>> [virtual] Expansion ROM at fffff80900000000 [disabled]
>>>> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>>>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>>>> Capabilities: [44] Express (v1) PCI-Express to PCI/PCI-X Bridge, MSI 00
>>>> DevCap: MaxPayload 256 bytes, PhantFunc 0
>>>> ExtTag- AttnBtn- AttnInd- PwrInd- RBE-
>>>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>>>> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry-
>>>> MaxPayload 128 bytes, MaxReadReq 512 bytes
>>>> DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
>>>> LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s, Exit Latency L0s unlimited, L1 unlimited
>>>> ClockPM- Surprise- LLActRep- BwNot-
>>>> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
>>>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>>> LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
>>>> Capabilities: [5c] MSI: Enable- Count=1/1 Maskable- 64bit+
>>>> Address: 0000000000000000 Data: 0000
>>>> Capabilities: [6c] Power Management version 2
>>>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>>>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>>> Capabilities: [d8] PCI-X bridge device
>>>> Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq\x133MHz
>>>> Status: Dev\x02:00.2 64bit- 133MHz- SCD- USC- SCO- SRD-
>>>> Upstream: Capacitye535 CommitmentLimite535
>>>> Downstream: Capacitye535 CommitmentLimite535
>>>> Capabilities: [100 v1] Advanced Error Reporting
>>>> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
>>>> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>>>> UESvrt: DLP+ SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>>>> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>>>> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>>>> AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-
>>>> Capabilities: [300 v1] Power Budgeting <?>
>>>>
>>>> 0001:03:02.0 Fibre Channel: QLogic Corp. ISP2312-based 2Gb Fibre Channel to PCI-X HBA (rev 02)
>>>> Subsystem: Compaq Computer Corporation Device 0100
>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
>>>> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>> Latency: 128 (16000ns min), Cache Line Size: 64 bytes
>>>> Interrupt: pin A routed to IRQ 13
>>>> Region 0: I/O ports at 0000 [size%6]
>>>> Region 1: Memory at 00100000 (64-bit, non-prefetchable) [size=8K]
>>>> Region 3: [virtual] Memory at fffff80900000000 (32-bit, non-prefetchable)
>>>> Region 4: [virtual] Memory at fffff80900000000 (32-bit, non-prefetchable)
>>>> Region 5: [virtual] Memory at fffff80900000000 (32-bit, non-prefetchable)
>>>> Expansion ROM at 00120000 [disabled] [size\x128K]
>>>> Capabilities: [44] Power Management version 2
>>>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>>>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>>> Capabilities: [4c] PCI-X non-bridge device
>>>> Command: DPERE- ERO+ RBCQ2 OST=3
>>>> Status: Dev\x03:02.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC@96 DMOST=3 DMCRS2 RSCEM- 266MHz- 533MHz-
>>>> Capabilities: [54] MSI: Enable- Count=1/8 Maskable- 64bit+
>>>> Address: 0000000000000000 Data: 0000
>>>> Capabilities: [64] CompactPCI hot-swap <?>
>>>> Kernel driver in use: qla2xxx
>>>>
>>>>
>>>>
>>>> lspci -vt
>>>>
>>>> -+-[0001:02]-+-00.0-[03]----02.0 QLogic Corp. ISP2312-based 2Gb Fibre Channel to PCI-X HBA
>>>> | \-00.2-[04]--
>>>> +-[0000:02]---00.0-[03-0d]--+-01.0-[04-05]----00.0-[05]--+-1c.0 ULi Electronics Inc. USB 1.1 Controller
>>>> | | +-1c.1 ULi Electronics Inc. USB 1.1 Controller
>>>> | | +-1c.3 ULi Electronics Inc. USB 2.0 Controller
>>>> | | +-1e.0 ULi Electronics Inc. M1575 South Bridge
>>>> | | \-1f.0 ULi Electronics Inc. M5229 IDE
>>>> | +-02.0-[06]--
>>>> | +-08.0-[07]--
>>>> | +-09.0-[08-0a]----00.0-[09-0a]--+-04.0 Broadcom Corporation NetXtreme BCM5714 Gigabit Ethernet
>>>> | | +-04.1 Broadcom Corporation NetXtreme BCM5714 Gigabit Ethernet
>>>> | | \-08.0-[0a]--
>>>> | \-0a.0-[0b-0d]----00.0-[0c-0d]--+-04.0 Broadcom Corporation NetXtreme BCM5714 Gigabit Ethernet
>>>> | +-04.1 Broadcom Corporation NetXtreme BCM5714 Gigabit Ethernet
>>>> | \-08.0-[0d]----01.0 LSI Logic / Symbios Logic SAS1064 PCI-X Fusion-MPT SAS
>>>> \-[0000:00]-
>>>>
>>>> prtconf -pv:
>>>>
>>>> System Configuration: Sun Microsystems sun4u
>>>> Memory size: 4096 Megabytes
>>>> System Peripherals (PROM Nodes):
>>>>
>>>> Node 0xf002a25c
>>>> .node: f002a25c
>>>> interrupt-map: 00000400.0fd30000.00000001.f006872c.0000003d.00000400.0fd20000.00000001.f006872c.0000003c
>>>> interrupt-map-mask: 00000fff.0fff0000.00000003
>>>> #interrupt-cells: 00000001
>>>> banner-name: 'Sun Fire V245'
>>>> model: 'SUNW,375-3464'
>>>> idprom: 01840014.4f720e2e.00000000.720e2ede.f1010a00.00000000.00000000.000000fa
>>>> scsi-initiator-id: 00000007
>>>> name: 'SUNW,Sun-Fire-V245'
>>>> stick-frequency: 01312d00
>>>> clock-frequency: 0b34a700
>>>> breakpoint-trap: 0000007f
>>>> #size-cells: 00000002
>>>> device_type: 'jbus'
>>>>
>>>> Node 0xf002d444
>>>> .node: f002d444
>>>> name: 'packages'
>>>>
>>>> Node 0xf0049e30
>>>> .node: f0049e30
>>>> name: 'SUNW,builtin-drivers'
>>>>
>>>> Node 0xf005a350
>>>> .node: f005a350
>>>> lba64:
>>>> disk-write-fix:
>>>> name: 'deblocker'
>>>>
>>>> Node 0xf005aa4c
>>>> .node: f005aa4c
>>>> name: 'disk-label'
>>>>
>>>> Node 0xf005b3a8
>>>> .node: f005b3a8
>>>> iso6429-1983-colors:
>>>> name: 'terminal-emulator'
>>>>
>>>> Node 0xf00630c8
>>>> .node: f00630c8
>>>> source: '/flashprom:'
>>>> name: 'dropins'
>>>>
>>>> Node 0xf007b1a4
>>>> .node: f007b1a4
>>>> name: 'kbd-translator'
>>>>
>>>> Node 0xf007c4b8
>>>> .node: f007c4b8
>>>> name: 'obp-tftp'
>>>>
>>>> Node 0xf008be5c
>>>> .node: f008be5c
>>>> name: 'SUNW,i2c-ram-device'
>>>>
>>>> Node 0xf008c6a0
>>>> .node: f008c6a0
>>>> name: 'SUNW,fru-device'
>>>>
>>>> Node 0xf008cea8
>>>> .node: f008cea8
>>>> maximum-reason-length: 000000fa
>>>> name: 'SUNW,asr'
>>>>
>>>> Node 0xf002d4bc
>>>> .node: f002d4bc
>>>> bootargs: 00
>>>> bootpath: '/pci@1e,600000/pci@0/pci@a/pci@0/pci@8/scsi@1/disk@0,0:a'
>>>> mmu: fff74080
>>>> memory: fff74290
>>>> stdout: fefffb00
>>>> stdin: fefffd90
>>>> stdout-#lines: ffffffff
>>>> name: 'chosen'
>>>>
>>>> Node 0xf002d530
>>>> .node: f002d530
>>>> version: 'OBP 4.30.4 2009/08/19 07:18'
>>>> model: 'SUNW,4.30.4'
>>>> aligned-allocator:
>>>> relative-addressing:
>>>> name: 'openprom'
>>>>
>>>> Node 0xf002d5c0
>>>> .node: f002d5c0
>>>> name: 'client-services'
>>>>
>>>> Node 0xf002d678
>>>> .node: f002d678
>>>> asr-policy: 'normal'
>>>> keyboard-layout: 'US-English'
>>>> test-args:
>>>> diag-passes: '1'
>>>> local-mac-address?: 'true'
>>>> fcode-debug?: 'false'
>>>> scsi-initiator-id: '7'
>>>> oem-logo:
>>>> oem-logo?: 'false'
>>>> oem-banner: 'Ehh ei tea'
>>>> oem-banner?: 'false'
>>>> ansi-terminal?: 'true'
>>>> screen-#columns: '80'
>>>> screen-#rows: '34'
>>>> ttyb-rts-dtr-off: 'false'
>>>> ttyb-ignore-cd: 'true'
>>>> ttya-rts-dtr-off: 'false'
>>>> ttya-ignore-cd: 'true'
>>>> ttyb-mode: '9600,8,n,1,-'
>>>> ttya-mode: '9600,8,n,1,-'
>>>> output-device: 'screen'
>>>> input-device: 'keyboard'
>>>> auto-boot-on-error?: 'true'
>>>> error-reset-recovery: 'sync'
>>>> load-base: '16384'
>>>> auto-boot?: 'true'
>>>> network-boot-arguments:
>>>> boot-command: 'boot'
>>>> diag-file:
>>>> diag-device: 'net'
>>>> boot-file:
>>>> boot-device: 'disk net'
>>>> use-nvramrc?: 'false'
>>>> nvramrc:
>>>> security-mode: 'none'
>>>> security-password:
>>>> security-#badlogins: '0'
>>>> verbosity: 'normal'
>>>> diag-trigger: 'error-reset power-on-reset '
>>>> service-mode?: 'false'
>>>> diag-script: 'normal'
>>>> diag-level: 'max'
>>>> diag-switch?: 'false'
>>>> name: 'options'
>>>>
>>>> Node 0xf002d6f0
>>>> .node: f002d6f0
>>>> net: '/pci@1e,600000/pci@0/pci@9/pci@0/network@4'
>>>> net0: '/pci@1e,600000/pci@0/pci@9/pci@0/network@4'
>>>> net1: '/pci@1e,600000/pci@0/pci@9/pci@0/network@4,1'
>>>> net2: '/pci@1e,600000/pci@0/pci@a/pci@0/network@4'
>>>> net3: '/pci@1e,600000/pci@0/pci@a/pci@0/network@4,1'
>>>> cdrom: '/pci@1e,600000/pci@0/pci@1/pci@0/ide@1f/cdrom@0,0:f'
>>>> ide: '/pci@1e,600000/pci@0/pci@1/pci@0/ide@1f'
>>>> disk: '/pci@1e,600000/pci@0/pci@a/pci@0/pci@8/scsi@1/disk@0,0'
>>>> disk0: '/pci@1e,600000/pci@0/pci@a/pci@0/pci@8/scsi@1/disk@0,0'
>>>> disk1: '/pci@1e,600000/pci@0/pci@a/pci@0/pci@8/scsi@1/disk@1,0'
>>>> disk2: '/pci@1e,600000/pci@0/pci@a/pci@0/pci@8/scsi@1/disk@2,0'
>>>> disk3: '/pci@1e,600000/pci@0/pci@a/pci@0/pci@8/scsi@1/disk@3,0'
>>>> scsi: '/pci@1e,600000/pci@0/pci@a/pci@0/pci@8/scsi@1'
>>>> ttya: '/ebus@1f,464000/serial@2,80'
>>>> ttyb: '/ebus@1f,464000/serial@2,40'
>>>> sc-control: '/ebus@1f,464000/rmc-comm@2,0'
>>>> name: 'aliases'
>>>>
>>>> Node 0xf003fce0
>>>> .node: f003fce0
>>>> reg: 00000000.00000000.00000000.80000000.00000001.00000000.00000000.80000000
>>>> available: 00000001.7fee6000.00000000.00002000.00000001.7fee0000.00000000.00004000.00000001.7fe44000.00000000.0001c000.00000001.7f000000.00000000.00e34000.00000001.00000000.00000000.7effe000.00000000.00000000.00000000.80000000
>>>> name: 'memory'
>>>>
>>>> Node 0xf00402ec
>>>> .node: f00402ec
>>>> translations: 00000000.00002000.00000000.003fe000.80000000.00002036.00000000.00400000.00000000.00800000.80000001.00000036.00000000.40000000.00000000.04000000.80000001.00000036.00000000.f0000000.00000000.00080000.80000001.7ff800b6.00000000.f0080000.00000000.00010000.80000001.7ff200b6.00000000.f0090000.00000000.00010000.80000001.7ff100b6.00000000.f00a0000.00000000.00010000.80000001.7fed00b6.00000000.f00b0000.00000000.00010000.80000001.7fec00b6.00000000.f00c0000.00000000.00020000.80000001.7fea00b6.00000000.f00e0000.00000000.00020000.80000001.7fe800b6.00000000.f0100000.00000000.00010000.80000001.7fe700b6.00000000.f0110000.00000000.00010000.80000001.7fe600b6.00000000.feb20000.00000000.00200000.800007ff.f000008e.00000000.fed20000.00000000.000f0000.80000400.0ff0008e.00000000.fee10000.00000000.000f0000.80000400.0f60008e.00000000.fefe4000.00000000.0001c000.80000001.7feee0b6.00000000.fff10000.00000000.00002000.800007f8.1000008e.00000000.fff12000.00000000.00002000.800007f
> 9.0!
>>> 020
>>>> 408e.00000000.fff14000.00000000.00002000.800007f9.0020008e.00000000.fff16000.00000000.00002000.800007f9.0020008e.00000000.fff1c000.00000000.00002000.800007ff.f200008e.00000000.fff1e000.00000000.00002000.80000001.7feec0b6.00000000.fff20000.00000000.00002000.800007f9.0020008e.00000000.fff22000.00000000.00002000.80000001.7ff340b6.00000000.fff24000.00000000.00002000.80000001.7ff320b6.00000000.fff26000.00000000.00002000.800007ff.f100008e.00000000.fff28000.00000000.00002000.80000001.7ff360b6.00000000.fff2a000.00000000.00002000.80000001.7ff440b6.00000000.fff2c000.00000000.00006000.80000001.7ff0a0b6.00000000.fff32000.00000000.00002000.800007ff.f300008e.00000000.fff34000.00000000.00002000.80000001.7effe0b6.00000000.fff36000.00000000.00002000.800007f6.0020008e.00000000.fff38000.00000000.00004000.80000001.7ff380b6.00000000.fff3c000.00000000.00002000.80000400.0fc0008e.00000000.fff3e000.00000000.00002000.800007f8.00d0808e.00000000.fff40000.00000000.00004000.80000001.7ff3c0b6.000000
> 00.!
>>> fff
>>>> 44000.00000000.00002000.80000400.0f40008e.00000000.fff46000.00000000.00004000.80000001.7ff400b6.00000000.fff4a000.00000000.00002000.80000400.0fd3008e.00000000.fff50000.00000000.00002000.80000001.7ff5e0b6.00000000.fff52000.00000000.00016000.80000001.7ff460b6.00000000.fff68000.00000000.00008000.80000001.7ff600b6.00000000.fff70000.00000000.00010000.80000001.7ff700b6
>>>> existing: 00000000.00000000.00000800.00000000.fffff800.00000000.00000800.00000000
>>>> available: fffff800.00000000.000007fc.00000000.00000001.00000000.000007ff.00000000.00000000.ffff0000.00000000.0000e000.00000000.00000000.00000000.f0000000.00000000.fff18000.00000000.00004000.00000000.fff00000.00000000.00010000.00000000.fef00000.00000000.000e4000.00000000.f0800000.00000000.0e320000
>>>> page-size: 00002000
>>>> name: 'virtual-memory'
>>>>
>>>> Node 0xf0067eac
>>>> .node: f0067eac
>>>> clock-divisors: 00000001.00000002.00000020
>>>> clock-frequency: 59a53800
>>>> manufacturer#: 0000003e
>>>> implementation#: 00000016
>>>> mask#: 00000034
>>>> ecache-associativity: 00000004
>>>> ecache-line-size: 00000040
>>>> sparc-version: 00000009
>>>> #dtlb-entries: 00000010
>>>> dcache-associativity: 00000004
>>>> dcache-line-size: 00000020
>>>> dcache-size: 00010000
>>>> #itlb-entries: 00000010
>>>> icache-associativity: 00000004
>>>> icache-line-size: 00000020
>>>> icache-size: 00008000
>>>> device_type: 'cpu'
>>>> cpuid: 00000000
>>>> portid: 00000000
>>>> reg: 00000400.00000000.00000000.00010000
>>>> ecache-size: 00100000
>>>> name: 'SUNW,UltraSPARC-IIIi'
>>>>
>>>> Node 0xf00685f0
>>>> .node: f00685f0
>>>> memory-control-register-1: 5000010a.3e901cb7
>>>> memory-layout: 42302f44.30000000.42302f44.31000000.42312f44.30000000.42312f44.31000000.01ff00ff.0000ff00.ff0000ff.ffff00ff.00800000.00000000.00001718.1c1f7275.797b2c53.545758ae.afb2b353.545758ae.afb2b348.494f50a5.a6aaab48.494f50a5.a6aaab3d.40444599.9ba1a235.37393c92.9396973d.40444599.9ba1a235.37393c92.93969702.0406085e.5f626302.0406085e.5f62630c.0d131469.6a6d6e0c.0d131469.6a6d6e21.2327287e.7f838517.181c1f72.75797b2c.2d313386.878e9021.2327287e.7f838500
>>>> compatible: 53554e57.2c556c74.72615350.4152432d.49494969.2c6d6300.53554e57.2c6d6300
>>>> portid: 00000000
>>>> reg: 00000400.00000000.00000000.00000008
>>>> device_type: 'memory-controller'
>>>> name: 'memory-controller'
>>>>
>>>> Node 0xf006872c
>>>> .node: f006872c
>>>> interrupt-map: 00000000.00000000.00000000.00000001.f006872c.00000014.00000000.00000000.00000000.00000002.f006872c.00000015.00000000.00000000.00000000.00000003.f006872c.00000016.00000000.00000000.00000000.00000004.f006872c.00000017
>>>> interrupt-map-mask: 00000000.00000000.00000000.00000007
>>>> #interrupt-cells: 00000001
>>>> available: 81000000.00000000.00003000.00000000.0000d000.82000000.00000000.00120000.00000000.000e0000.82000000.00000000.05000000.00000000.7aff0000.c3000000.00000001.00000000.00000000.ffff0000
>>>> reg: 00000400.0f600000.00000000.000f0000.00000400.0f410000.00000000.00064000
>>>> ranges: 00000000.00000000.00000000.000007f8.00000000.00000000.10000000.01000000.00000000.00000000.000007f8.10000000.00000000.10000000.02000000.00000000.00000000.000007f9.00000000.00000000.7fff0000.03000000.00000000.00000000.000007fc.00000000.00000001.ffff0000
>>>> msi-address-ranges: 00000000.7fff0000.00010000.00000003.ffff0000.00010000
>>>> msi-eq-devino: 00000000.00000024.00000018
>>>> #msi-eqs: 00000024
>>>> msix-data-width: 00000020
>>>> msi-eq-size: 00000080
>>>> msi-ranges: 00000000.00000100
>>>> msi-data-mask: 000000ff
>>>> #msi: 00000100
>>>> bus-range: 00000002.0000000d
>>>> bus-parity-generated:
>>>> compatible: 'pciex108e,80f0'
>>>> name: 'pci'
>>>> device_type: 'pciex'
>>>> #address-cells: 00000003
>>>> #size-cells: 00000002
>>>> module-manufacturer#: 00000036
>>>> fire-revision#: 00000003
>>>> module-revision#: 00000003
>>>> portid: 0000001e
>>>> ino-bitmap: fff7f817.ffffffff
>>>> interrupts: 0000003f.0000003e
>>>>
>>>> Node 0xf00ad404
>>>> .node: f00ad404
>>>> assigned-addresses: 82020010.00000000.00100000.00000000.00020000
>>>> ranges: 81000000.00000000.00000000.81000000.00000000.00000000.00000000.00003000.82000000.00000000.00200000.82000000.00000000.00200000.00000000.04e00000
>>>> bus-range: 00000003.0000000d
>>>> compatible: 70636965.78313062.352c3835.33322e62.61007063.69657831.3062352c.38353332.00706369.6578636c.6173732c.30363034.30300070.63696578.636c6173.732c3036.303400
>>>> reg: 00020000.00000000.00000000.00000000.00000000
>>>> #address-cells: 00000003
>>>> #size-cells: 00000002
>>>> device_type: 'pciex'
>>>> name: 'pci'
>>>> interrupts: 00000001
>>>> cache-line-size: 00000010
>>>> class-code: 00060400
>>>> revision-id: 000000ba
>>>> device-id: 00008532
>>>> vendor-id: 000010b5
>>>>
>>>> Node 0xf00af7c8
>>>> .node: f00af7c8
>>>> ranges: 81000000.00000000.00000000.81000000.00000000.00000000.00000000.00002000.82000000.00000000.00200000.82000000.00000000.00200000.00000000.03e00000
>>>> bus-range: 00000004.00000005
>>>> compatible: 70636965.78313062.352c3835.33322e62.61007063.69657831.3062352c.38353332.00706369.6578636c.6173732c.30363034.30300070.63696578.636c6173.732c3036.303400
>>>> reg: 00030800.00000000.00000000.00000000.00000000
>>>> #address-cells: 00000003
>>>> #size-cells: 00000002
>>>> device_type: 'pciex'
>>>> name: 'pci'
>>>> interrupts: 00000001
>>>> cache-line-size: 00000010
>>>> class-code: 00060400
>>>> revision-id: 000000ba
>>>> device-id: 00008532
>>>> vendor-id: 000010b5
>>>>
>>>> Node 0xf00b1b8c
>>>> .node: f00b1b8c
>>>> interrupt-map: 0000e000.00000000.00000000.00000001.f006872c.00000000.0000e100.00000000.00000000.00000002.f006872c.00000000.0000e200.00000000.00000000.00000003.f006872c.00000000.0000e300.00000000.00000000.00000004.f006872c.00000001.0000f800.00000000.00000000.00000001.f006872c.00000004
>>>> interrupt-map-mask: 0000ff00.00000000.00000000.00000007
>>>> #interrupt-cells: 00000001
>>>> available: 81000000.00000000.00001140.00000000.00000ec0.82000000.00000000.00202000.00000000.00002000.82000000.00000000.00208000.00000000.00df8000
>>>> ranges: 81000000.00000000.00001000.81000000.00000000.00001000.00000000.00001000.82000000.00000000.00200000.82000000.00000000.00200000.00000000.03e00000
>>>> bus-range: 00000005.00000005
>>>> compatible: 70636965.78313062.392c3532.34392e30.00706369.65783130.62392c35.32343900.70636965.78636c61.73732c30.36303430.30007063.69657863.6c617373.2c303630.3400
>>>> reg: 00040000.00000000.00000000.00000000.00000000
>>>> #address-cells: 00000003
>>>> #size-cells: 00000002
>>>> device_type: 'pciex'
>>>> name: 'pci'
>>>> cache-line-size: 00000010
>>>> class-code: 00060400
>>>> revision-id: 00000000
>>>> device-id: 00005249
>>>> vendor-id: 000010b9
>>>>
>>>> Node 0xf00b3f2c
>>>> .node: f00b3f2c
>>>> assigned-addresses: 8205e010.00000000.01000000.00000000.01000000
>>>> sunw,find-fcode: f00b975c
>>>> maximum-frame#: 0000ffff
>>>> reg: 0005e000.00000000.00000000.00000000.00000000.0205e010.00000000.00000000.00000000.01000000
>>>> #size-cells: 00000000
>>>> #address-cells: 00000001
>>>> compatible: 70636931.3062392c.35323337.2e313062.392e3532.33372e33.00706369.31306239.2c353233.372e3130.62392e35.32333700.70636931.3062392c.35323337.00706369.31306239.2c353233.372e3300.70636931.3062392c.35323337.00706369.636c6173.732c3063.30333130.00706369.636c6173.732c3063.303300
>>>> name: 'usb'
>>>> 66mhz-capable:
>>>> fast-back-to-back:
>>>> devsel-speed: 00000001
>>>> latency-timer: 00000040
>>>> max-latency: 00000050
>>>> min-grant: 00000000
>>>> interrupts: 00000001
>>>> cache-line-size: 00000010
>>>> class-code: 000c0310
>>>> subsystem-id: 00005237
>>>> subsystem-vendor-id: 000010b9
>>>> revision-id: 00000003
>>>> device-id: 00005237
>>>> vendor-id: 000010b9
>>>>
>>>> Node 0xf00ba5f8
>>>> .node: f00ba5f8
>>>> assigned-addresses: 8205e110.00000000.02000000.00000000.01000000
>>>> sunw,find-fcode: f00bfe28
>>>> maximum-frame#: 0000ffff
>>>> reg: 0005e100.00000000.00000000.00000000.00000000.0205e110.00000000.00000000.00000000.01000000
>>>> #size-cells: 00000000
>>>> #address-cells: 00000001
>>>> compatible: 70636931.3062392c.35323337.2e313062.392e3532.33372e33.00706369.31306239.2c353233.372e3130.62392e35.32333700.70636931.3062392c.35323337.00706369.31306239.2c353233.372e3300.70636931.3062392c.35323337.00706369.636c6173.732c3063.30333130.00706369.636c6173.732c3063.303300
>>>> name: 'usb'
>>>> 66mhz-capable:
>>>> fast-back-to-back:
>>>> devsel-speed: 00000001
>>>> latency-timer: 00000040
>>>> max-latency: 00000050
>>>> min-grant: 00000000
>>>> interrupts: 00000002
>>>> cache-line-size: 00000010
>>>> class-code: 000c0310
>>>> subsystem-id: 00005237
>>>> subsystem-vendor-id: 000010b9
>>>> revision-id: 00000003
>>>> device-id: 00005237
>>>> vendor-id: 000010b9
>>>>
>>>> Node 0xf00c0c40
>>>> .node: f00c0c40
>>>> #size-cells: 00000000
>>>> #address-cells: 00000001
>>>> endpoints: '0,8,81,1'
>>>> interface#: 00000000
>>>> compatible: 75736233.65622c33.3330312e.33303000.75736233.65622c33.33303100.75736233.65622c63.6c617373.392e302e.30007573.62336562.2c636c61.7373392e.30007573.62336562.2c636c61.73733900.7573622c.636c6173.73392e30.2e300075.73622c63.6c617373.392e3000.7573622c.636c6173.73390075.73626966.3365622c.636c6173.73392e30.2e300075.73626966.3365622c.636c6173.73392e30.00757362.69663365.622c636c.61737339.00757362.69662c63.6c617373.392e302e.30007573.6269662c.636c6173.73392e30.00757362.69662c63.6c617373.3900
>>>> name: 'hub'
>>>> reg: 00000001
>>>> assigned-address: 00000002
>>>> 0max-packet: 00000008
>>>>
>>>> Node 0xf00cc644
>>>> .node: f00cc644
>>>> assigned-addresses: 8205e310.00000000.00200000.00000000.00002000
>>>> reg: 0005e300.00000000.00000000.00000000.00000000.0205e310.00000000.00000000.00000000.00002000
>>>> compatible: 70636931.3062392c.35323339.2e313062.392e3532.33382e32.30303100.70636931.3062392c.35323339.2e313062.392e3532.33380070.63693130.62392c35.32333800.70636931.3062392c.35323339.2e323030.31007063.69313062.392c3532.33390070.6369636c.6173732c.30633033.32300070.6369636c.6173732c.30633033.00
>>>> name: 'usb'
>>>> 66mhz-capable:
>>>> fast-back-to-back:
>>>> devsel-speed: 00000001
>>>> latency-timer: 00000040
>>>> max-latency: 00000020
>>>> min-grant: 00000010
>>>> interrupts: 00000004
>>>> cache-line-size: 00000010
>>>> class-code: 000c0320
>>>> subsystem-id: 00005238
>>>> subsystem-vendor-id: 000010b9
>>>> revision-id: 00000001
>>>> device-id: 00005239
>>>> vendor-id: 000010b9
>>>>
>>>> Node 0xf00ccd3c
>>>> .node: f00ccd3c
>>>> assigned-addresses: 8105f010.00000000.00000000.00000000.00001000
>>>> ranges: 00000000.00000000.8105f010.00000000.00000000.00001000
>>>> reg: 0005f000.00000000.00000000.00000000.00000000.8105f010.00000000.00000000.00000000.00001000
>>>> #size-cells: 00000001
>>>> #address-cells: 00000002
>>>> name: 'isa'
>>>> devsel-speed: 00000001
>>>> latency-timer: 00000040
>>>> max-latency: 00000018
>>>> min-grant: 00000001
>>>> cache-line-size: 00000000
>>>> class-code: 00060100
>>>> subsystem-id: 00001575
>>>> subsystem-vendor-id: 000010b9
>>>> revision-id: 00000000
>>>> device-id: 00001575
>>>> vendor-id: 000010b9
>>>>
>>>> Node 0xf00cdb98
>>>> .node: f00cdb98
>>>> address: fff10070
>>>> reg: 00000000.00000070.00000004
>>>> compatible: 'isa-m5823p'
>>>> model: 'm5823'
>>>> name: 'rtc'
>>>>
>>>> Node 0xf00ceac0
>>>> .node: f00ceac0
>>>> assigned-addresses: 8105f810.00000000.00001040.00000000.00000040.8105f814.00000000.00001080.00000000.00000040.8105f818.00000000.000010c0.00000000.00000040.8105f81c.00000000.00001100.00000000.00000040.8105f820.00000000.00001000.00000000.00000040
>>>> reg: 0005f800.00000000.00000000.00000000.00000000.0105f810.00000000.00000000.00000000.00000028.0105f814.00000000.00000000.00000000.00000024.0105f818.00000000.00000000.00000000.00000028.0105f81c.00000000.00000000.00000000.00000024.0105f820.00000000.00000000.00000000.00000030
>>>> compatible: 70636931.3062392c.35323239.2e313062.392e3532.32392e63.38007063.69313062.392c3532.32392e31.3062392e.35323239.00706369.31306239.2c353232.39007063.69313062.392c3532.32392e63.38007063.69313062.392c3532.32390070.6369636c.6173732c.30313031.38660070.6369636c.6173732c.30313031.00
>>>> #address-cells: 00000002
>>>> device_type: 'ide'
>>>> name: 'ide'
>>>> 66mhz-capable:
>>>> fast-back-to-back:
>>>> devsel-speed: 00000001
>>>> latency-timer: 00000040
>>>> max-latency: 00000000
>>>> min-grant: 00000000
>>>> interrupts: 00000001
>>>> cache-line-size: 00000010
>>>> class-code: 0001018f
>>>> subsystem-id: 00005229
>>>> subsystem-vendor-id: 000010b9
>>>> revision-id: 000000c8
>>>> device-id: 00005229
>>>> vendor-id: 000010b9
>>>>
>>>> Node 0xf00d1da4
>>>> .node: f00d1da4
>>>> device_type: 'block'
>>>> name: 'disk'
>>>> compatible: 'ide-disk'
>>>>
>>>> Node 0xf00d2498
>>>> .node: f00d2498
>>>> device_type: 'block'
>>>> name: 'cdrom'
>>>> compatible: 'ide-cdrom'
>>>>
>>>> Node 0xf00d3084
>>>> .node: f00d3084
>>>> slot-names: 00000001.5043492d.45203200
>>>> ranges: 82000000.00000000.fff00000.82000000.00000000.fff00000.ffffffff.00200000
>>>> bus-range: 00000006.00000006
>>>> compatible: 70636965.78313062.352c3835.33322e62.61007063.69657831.3062352c.38353332.00706369.6578636c.6173732c.30363034.30300070.63696578.636c6173.732c3036.303400
>>>> reg: 00031000.00000000.00000000.00000000.00000000
>>>> physical-slot#: 000000e2
>>>> #address-cells: 00000003
>>>> #size-cells: 00000002
>>>> device_type: 'pciex'
>>>> name: 'pci'
>>>> interrupts: 00000001
>>>> cache-line-size: 00000010
>>>> class-code: 00060400
>>>> revision-id: 000000ba
>>>> device-id: 00008532
>>>> vendor-id: 000010b5
>>>>
>>>> Node 0xf00d550c
>>>> .node: f00d550c
>>>> slot-names: 00000001.5043492d.45203000
>>>> ranges: 82000000.00000000.fff00000.82000000.00000000.fff00000.ffffffff.00200000
>>>> bus-range: 00000007.00000007
>>>> compatible: 70636965.78313062.352c3835.33322e62.61007063.69657831.3062352c.38353332.00706369.6578636c.6173732c.30363034.30300070.63696578.636c6173.732c3036.303400
>>>> reg: 00034000.00000000.00000000.00000000.00000000
>>>> physical-slot#: 000000e0
>>>> #address-cells: 00000003
>>>> #size-cells: 00000002
>>>> device_type: 'pciex'
>>>> name: 'pci'
>>>> interrupts: 00000001
>>>> cache-line-size: 00000010
>>>> class-code: 00060400
>>>> revision-id: 000000ba
>>>> device-id: 00008532
>>>> vendor-id: 000010b5
>>>>
>>>> Node 0xf00d7994
>>>> .node: f00d7994
>>>> ranges: 82000000.00000000.04000000.82000000.00000000.04000000.00000000.00600000
>>>> bus-range: 00000008.0000000a
>>>> compatible: 70636965.78313062.352c3835.33322e62.61007063.69657831.3062352c.38353332.00706369.6578636c.6173732c.30363034.30300070.63696578.636c6173.732c3036.303400
>>>> reg: 00034800.00000000.00000000.00000000.00000000
>>>> #address-cells: 00000003
>>>> #size-cells: 00000002
>>>> device_type: 'pciex'
>>>> name: 'pci'
>>>> interrupts: 00000001
>>>> cache-line-size: 00000010
>>>> class-code: 00060400
>>>> revision-id: 000000ba
>>>> device-id: 00008532
>>>> vendor-id: 000010b5
>>>>
>>>> Node 0xf00d9d58
>>>> .node: f00d9d58
>>>> available: 82000000.00000000.04000000.00000000.00010000.82000000.00000000.04040000.00000000.001c0000
>>>> ranges: 82000000.00000000.04000000.82000000.00000000.04000000.00000000.00600000
>>>> bus-range: 00000009.0000000a
>>>> compatible: 70636965.78313136.362c3130.332e6235.00706369.65783131.36362c31.30330070.63696578.636c6173.732c3036.30343030.00706369.6578636c.6173732c.30363034.00
>>>> reg: 00080000.00000000.00000000.00000000.00000000
>>>> #address-cells: 00000003
>>>> #size-cells: 00000002
>>>> device_type: 'pciex'
>>>> name: 'pci'
>>>> cache-line-size: 00000010
>>>> class-code: 00060400
>>>> revision-id: 000000b5
>>>> device-id: 00000103
>>>> vendor-id: 00001166
>>>>
>>>> Node 0xf00dc0f4
>>>> .node: f00dc0f4
>>>> local-mac-address: 00144f72.0e2e
>>>> assigned-addresses: 82092010.00000000.04200000.00000000.00200000.82092018.00000000.04010000.00000000.00010000.82092030.00000000.04020000.00000000.00010000
>>>> compatible: 70636931.3465342c.31363638.2e313038.652e3136.36382e61.33007063.69313465.342c3136.36382e31.3038652e.31363638.00706369.31303865.2c313636.38007063.69313465.342c3136.36382e61.33007063.69313465.342c3136.36380070.6369636c.6173732c.30323030.30300070.6369636c.6173732c.30323030.00
>>>> reg: 00092000.00000000.00000000.00000000.00000000.03092010.00000000.00000000.00000000.00200000.03092018.00000000.00000000.00000000.00010000
>>>> max-frame-size: 00010000
>>>> address-bits: 00000030
>>>> network-interface-type: 'ethernet'
>>>> device_type: 'network'
>>>> name: 'network'
>>>> 66mhz-capable:
>>>> fast-back-to-back:
>>>> devsel-speed: 00000001
>>>> latency-timer: 00000040
>>>> max-latency: 00000000
>>>> min-grant: 00000040
>>>> interrupts: 00000001
>>>> cache-line-size: 00000010
>>>> class-code: 00020000
>>>> subsystem-id: 00001668
>>>> subsystem-vendor-id: 0000108e
>>>> revision-id: 000000a3
>>>> device-id: 00001668
>>>> vendor-id: 000014e4
>>>>
>>>> Node 0xf00e2f6c
>>>> .node: f00e2f6c
>>>> local-mac-address: 00144f72.0e2f
>>>> assigned-addresses: 82092110.00000000.04400000.00000000.00200000.82092118.00000000.04030000.00000000.00010000
>>>> compatible: 70636931.3465342c.31363638.2e313038.652e3136.36382e61.33007063.69313465.342c3136.36382e31.3038652e.31363638.00706369.31303865.2c313636.38007063.69313465.342c3136.36382e61.33007063.69313465.342c3136.36380070.6369636c.6173732c.30323030.30300070.6369636c.6173732c.30323030.00
>>>> reg: 00092100.00000000.00000000.00000000.00000000.03092110.00000000.00000000.00000000.00200000.03092118.00000000.00000000.00000000.00010000
>>>> max-frame-size: 00010000
>>>> address-bits: 00000030
>>>> network-interface-type: 'ethernet'
>>>> device_type: 'network'
>>>> name: 'network'
>>>> 66mhz-capable:
>>>> fast-back-to-back:
>>>> devsel-speed: 00000001
>>>> latency-timer: 00000040
>>>> max-latency: 00000000
>>>> min-grant: 00000040
>>>> interrupts: 00000002
>>>> cache-line-size: 00000010
>>>> class-code: 00020000
>>>> subsystem-id: 00001668
>>>> subsystem-vendor-id: 0000108e
>>>> revision-id: 000000a3
>>>> device-id: 00001668
>>>> vendor-id: 000014e4
>>>>
>>>> Node 0xf00e9dd0
>>>> .node: f00e9dd0
>>>> ranges: 82000000.00000000.fff00000.82000000.00000000.fff00000.ffffffff.00200000
>>>> bus-range: 0000000a.0000000a
>>>> compatible: 70636931.3136362c.3130342e.62340070.63693131.36362c31.30340070.6369636c.6173732c.30363034.30300070.6369636c.6173732c.30363034.00
>>>> reg: 00094000.00000000.00000000.00000000.00000000
>>>> #address-cells: 00000003
>>>> #size-cells: 00000002
>>>> device_type: 'pci'
>>>> name: 'pci'
>>>> 66mhz-capable:
>>>> devsel-speed: 00000001
>>>> latency-timer: 00000040
>>>> cache-line-size: 00000010
>>>> class-code: 00060400
>>>> revision-id: 000000b4
>>>> device-id: 00000104
>>>> vendor-id: 00001166
>>>>
>>>> Node 0xf00ec3f0
>>>> .node: f00ec3f0
>>>> ranges: 81000000.00000000.00002000.81000000.00000000.00002000.00000000.00001000.82000000.00000000.04600000.82000000.00000000.04600000.00000000.00a00000
>>>> bus-range: 0000000b.0000000d
>>>> compatible: 70636965.78313062.352c3835.33322e62.61007063.69657831.3062352c.38353332.00706369.6578636c.6173732c.30363034.30300070.63696578.636c6173.732c3036.303400
>>>> reg: 00035000.00000000.00000000.00000000.00000000
>>>> #address-cells: 00000003
>>>> #size-cells: 00000002
>>>> device_type: 'pciex'
>>>> name: 'pci'
>>>> interrupts: 00000001
>>>> cache-line-size: 00000010
>>>> class-code: 00060400
>>>> revision-id: 000000ba
>>>> device-id: 00008532
>>>> vendor-id: 000010b5
>>>>
>>>> Node 0xf00ee7b4
>>>> .node: f00ee7b4
>>>> available: 82000000.00000000.04600000.00000000.00010000.82000000.00000000.04640000.00000000.001c0000
>>>> ranges: 81000000.00000000.00002000.81000000.00000000.00002000.00000000.00001000.82000000.00000000.04600000.82000000.00000000.04600000.00000000.00a00000
>>>> bus-range: 0000000c.0000000d
>>>> compatible: 70636965.78313136.362c3130.332e6235.00706369.65783131.36362c31.30330070.63696578.636c6173.732c3036.30343030.00706369.6578636c.6173732c.30363034.00
>>>> reg: 000b0000.00000000.00000000.00000000.00000000
>>>> #address-cells: 00000003
>>>> #size-cells: 00000002
>>>> device_type: 'pciex'
>>>> name: 'pci'
>>>> cache-line-size: 00000010
>>>> class-code: 00060400
>>>> revision-id: 000000b5
>>>> device-id: 00000103
>>>> vendor-id: 00001166
>>>>
>>>> Node 0xf00f0b50
>>>> .node: f00f0b50
>>>> local-mac-address: 00144f72.0e30
>>>> assigned-addresses: 820c2010.00000000.04800000.00000000.00200000.820c2018.00000000.04610000.00000000.00010000.820c2030.00000000.04620000.00000000.00010000
>>>> compatible: 70636931.3465342c.31363638.2e313038.652e3136.36382e61.33007063.69313465.342c3136.36382e31.3038652e.31363638.00706369.31303865.2c313636.38007063.69313465.342c3136.36382e61.33007063.69313465.342c3136.36380070.6369636c.6173732c.30323030.30300070.6369636c.6173732c.30323030.00
>>>> reg: 000c2000.00000000.00000000.00000000.00000000.030c2010.00000000.00000000.00000000.00200000.030c2018.00000000.00000000.00000000.00010000
>>>> max-frame-size: 00010000
>>>> address-bits: 00000030
>>>> network-interface-type: 'ethernet'
>>>> device_type: 'network'
>>>> name: 'network'
>>>> 66mhz-capable:
>>>> fast-back-to-back:
>>>> devsel-speed: 00000001
>>>> latency-timer: 00000040
>>>> max-latency: 00000000
>>>> min-grant: 00000040
>>>> interrupts: 00000001
>>>> cache-line-size: 00000010
>>>> class-code: 00020000
>>>> subsystem-id: 00001668
>>>> subsystem-vendor-id: 0000108e
>>>> revision-id: 000000a3
>>>> device-id: 00001668
>>>> vendor-id: 000014e4
>>>>
>>>> Node 0xf00f79c8
>>>> .node: f00f79c8
>>>> local-mac-address: 00144f72.0e31
>>>> assigned-addresses: 820c2110.00000000.04a00000.00000000.00200000.820c2118.00000000.04630000.00000000.00010000
>>>> compatible: 70636931.3465342c.31363638.2e313038.652e3136.36382e61.33007063.69313465.342c3136.36382e31.3038652e.31363638.00706369.31303865.2c313636.38007063.69313465.342c3136.36382e61.33007063.69313465.342c3136.36380070.6369636c.6173732c.30323030.30300070.6369636c.6173732c.30323030.00
>>>> reg: 000c2100.00000000.00000000.00000000.00000000.030c2110.00000000.00000000.00000000.00200000.030c2118.00000000.00000000.00000000.00010000
>>>> max-frame-size: 00010000
>>>> address-bits: 00000030
>>>> network-interface-type: 'ethernet'
>>>> device_type: 'network'
>>>> name: 'network'
>>>> 66mhz-capable:
>>>> fast-back-to-back:
>>>> devsel-speed: 00000001
>>>> latency-timer: 00000040
>>>> max-latency: 00000000
>>>> min-grant: 00000040
>>>> interrupts: 00000002
>>>> cache-line-size: 00000010
>>>> class-code: 00020000
>>>> subsystem-id: 00001668
>>>> subsystem-vendor-id: 0000108e
>>>> revision-id: 000000a3
>>>> device-id: 00001668
>>>> vendor-id: 000014e4
>>>>
>>>> Node 0xf00fe82c
>>>> .node: f00fe82c
>>>> interrupt-map: 00000000.00000000.00000000.00000001.f006872c.0000000f.00000000.00000000.00000000.00000002.f006872c.00000010.00000000.00000000.00000000.00000003.f006872c.00000011.00000000.00000000.00000000.00000004.f006872c.00000012
>>>> interrupt-map-mask: 00000000.00000000.00000000.00000007
>>>> #interrupt-cells: 00000001
>>>> available: 81000000.00000000.00002100.00000000.00000f00.82000000.00000000.04c20000.00000000.001e0000
>>>> ranges: 81000000.00000000.00002000.81000000.00000000.00002000.00000000.00001000.82000000.00000000.04c00000.82000000.00000000.04c00000.00000000.00400000
>>>> bus-range: 0000000d.0000000d
>>>> compatible: 70636931.3136362c.3130342e.62340070.63693131.36362c31.30340070.6369636c.6173732c.30363034.30300070.6369636c.6173732c.30363034.00
>>>> reg: 000c4000.00000000.00000000.00000000.00000000
>>>> #address-cells: 00000003
>>>> #size-cells: 00000002
>>>> device_type: 'pci'
>>>> name: 'pci'
>>>> 66mhz-capable:
>>>> devsel-speed: 00000001
>>>> latency-timer: 00000040
>>>> cache-line-size: 00000010
>>>> class-code: 00060400
>>>> revision-id: 000000b4
>>>> device-id: 00000104
>>>> vendor-id: 00001166
>>>>
>>>> Node 0xf0100c30
>>>> .node: f0100c30
>>>> firmware-version: '1.08.04.00'
>>>> mpt-version: '1.05'
>>>> assigned-addresses: 810d0810.00000000.00002000.00000000.00000100.820d0814.00000000.04c00000.00000000.00010000.820d081c.00000000.04c10000.00000000.00010000.820d0830.00000000.04e00000.00000000.00200000
>>>> compatible: 70636931.3030302c.35302e31.3030302e.33303230.2e320070.63693130.30302c35.302e3130.30302e33.30323000.70636931.3030302c.33303230.00706369.31303030.2c35302e.32007063.69313030.302c3530.00706369.636c6173.732c3031.30303030.00706369.636c6173.732c3031.30300070.63693130.30302c35.3600
>>>> model: 'LSI,1064'
>>>> reg: 000d0800.00000000.00000000.00000000.00000000.010d0810.00000000.00000000.00000000.00000100.030d0814.00000000.00000000.00000000.00010000.030d081c.00000000.00000000.00000000.00010000.020d0830.00000000.00000000.00000000.00200000
>>>> version: '1.00.41'
>>>> wide: 00000010
>>>> device_type: 'scsi-2'
>>>> name: 'scsi'
>>>> local-wwid: 50800200.00002999
>>>> devsel-speed: 00000001
>>>> latency-timer: 000000f8
>>>> max-latency: 0000000a
>>>> min-grant: 00000040
>>>> interrupts: 00000001
>>>> cache-line-size: 00000080
>>>> class-code: 00010000
>>>> subsystem-id: 00003020
>>>> subsystem-vendor-id: 00001000
>>>> revision-id: 00000002
>>>> device-id: 00000050
>>>> vendor-id: 00001000
>>>>
>>>> Node 0xf010d3e8
>>>> .node: f010d3e8
>>>> device_type: 'byte'
>>>> compatible: 'st'
>>>> name: 'tape'
>>>>
>>>> Node 0xf010e128
>>>> .node: f010e128
>>>> lba64:
>>>> device_type: 'block'
>>>> compatible: 'sd'
>>>> name: 'disk'
>>>>
>>>> Node 0xf0071e78
>>>> .node: f0071e78
>>>> interrupt-map: 00000000.00000000.00000000.00000001.f0071e78.00000014.00000000.00000000.00000000.00000002.f0071e78.00000015.00000000.00000000.00000000.00000003.f0071e78.00000016.00000000.00000000.00000000.00000004.f0071e78.00000017
>>>> interrupt-map-mask: 00000000.00000000.00000000.00000007
>>>> #interrupt-cells: 00000001
>>>> available: 81000000.00000000.00001000.00000000.0ffff000.82000000.00000000.00200000.00000000.7fdf0000.c3000000.00000001.00000000.00000000.ffff0000
>>>> reg: 00000400.0ff00000.00000000.000f0000.00000400.0fc10000.00000000.00064000
>>>> ranges: 00000000.00000000.00000000.000007f6.00000000.00000000.10000000.01000000.00000000.00000000.000007f6.10000000.00000000.10000000.02000000.00000000.00000000.000007f7.00000000.00000000.7fff0000.03000000.00000000.00000000.000007f4.00000000.00000001.ffff0000
>>>> msi-address-ranges: 00000000.7fff0000.00010000.00000003.ffff0000.00010000
>>>> msi-eq-devino: 00000000.00000024.00000018
>>>> #msi-eqs: 00000024
>>>> msix-data-width: 00000020
>>>> msi-eq-size: 00000080
>>>> msi-ranges: 00000000.00000100
>>>> msi-data-mask: 000000ff
>>>> #msi: 00000100
>>>> bus-range: 00000002.00000004
>>>> bus-parity-generated:
>>>> compatible: 'pciex108e,80f0'
>>>> name: 'pci'
>>>> device_type: 'pciex'
>>>> #address-cells: 00000003
>>>> #size-cells: 00000002
>>>> module-manufacturer#: 00000036
>>>> fire-revision#: 00000003
>>>> module-revision#: 00000003
>>>> portid: 0000001f
>>>> ino-bitmap: fff3c77d.ffffffff
>>>> interrupts: 0000003f.0000003e
>>>>
>>>> Node 0xf009ca88
>>>> .node: f009ca88
>>>> slot-names: 00000004.5043492d.58203300
>>>> interrupt-map: 00000000.00000000.00000000.00000001.f0071e78.0000000e.00000000.00000000.00000000.00000002.f0071e78.0000000f.00000000.00000000.00000000.00000003.f0071e78.00000010.00000000.00000000.00000000.00000004.f0071e78.00000011
>>>> interrupt-map-mask: 00000000.00000000.00000000.00000007
>>>> #interrupt-cells: 00000001
>>>> available: 81000000.00000000.00000100.00000000.00000f00.82000000.00000000.00102000.00000000.0001e000.82000000.00000000.00140000.00000000.000c0000
>>>> ranges: 81000000.00000000.00000000.81000000.00000000.00000000.00000000.00001000.82000000.00000000.00100000.82000000.00000000.00100000.00000000.00100000
>>>> bus-range: 00000003.00000003
>>>> compatible: 70636965.78383038.362c3334.302e3900.70636965.78383038.362c3334.30007063.69657863.6c617373.2c303630.34303000.70636965.78636c61.73732c30.36303400
>>>> reg: 00020000.00000000.00000000.00000000.00000000
>>>> #address-cells: 00000003
>>>> #size-cells: 00000002
>>>> device_type: 'pciex'
>>>> name: 'pci'
>>>> cache-line-size: 00000010
>>>> class-code: 00060400
>>>> revision-id: 00000009
>>>> device-id: 00000340
>>>> vendor-id: 00008086
>>>>
>>>> Node 0xf009ee24
>>>> .node: f009ee24
>>>> assigned-addresses: 81031010.00000000.00000000.00000000.00000100.82031014.00000000.00100000.00000000.00002000.82031030.00000000.00120000.00000000.00020000
>>>> name: 'QLGC,qlc'
>>>> model: 'QLA2340'
>>>> port-wwn: 210000e0.8b90d24a
>>>> node-wwn: 200000e0.8b90d24a
>>>> reg: 00031000.00000000.00000000.00000000.00000000.01031010.00000000.00000000.00000000.00000100.03031014.00000000.00000000.00000000.00001000
>>>> compatible: 70636931.3037372c.32333132.2e653131.2e313030.2e320070.63693130.37372c32.3331322e.6531312e.31303000.70636965.31312c31.30300070.63693130.37372c32.3331322e.32007063.69313037.372c3233.31320070.6369636c.6173732c.63303430.3000
>>>> manufacturer: 'QLGC'
>>>> #size-cells: 00000000
>>>> #address-cells: 00000002
>>>> device_type: 'scsi-fcp'
>>>> version: 'ISP2312 Host Adapter fcode version 1.17 08/09/07'
>>>> fcode-rom-offset: 00000000
>>>> 66mhz-capable:
>>>> devsel-speed: 00000001
>>>> latency-timer: 00000040
>>>> max-latency: 00000000
>>>> min-grant: 00000040
>>>> interrupts: 00000001
>>>> cache-line-size: 00000010
>>>> class-code: 000c0400
>>>> subsystem-id: 00000100
>>>> subsystem-vendor-id: 00000e11
>>>> revision-id: 00000002
>>>> device-id: 00002312
>>>> vendor-id: 00001077
>>>>
>>>> Node 0xf00a996c
>>>> .node: f00a996c
>>>> #size-cells: 00000000
>>>> #address-cells: 00000004
>>>> reg: 00000000.00000000
>>>> device_type: 'fp'
>>>> name: 'fp'
>>>>
>>>> Node 0xf00aa068
>>>> .node: f00aa068
>>>> device_type: 'block'
>>>> compatible: 'ssd'
>>>> name: 'disk'
>>>>
>>>> Node 0xf00aaf68
>>>> .node: f00aaf68
>>>> slot-names: 00000002.5043492d.58203100
>>>> interrupt-map: 00000000.00000000.00000000.00000001.f006872c.0000000b.00000000.00000000.00000000.00000002.f006872c.0000000c.00000000.00000000.00000000.00000003.f006872c.0000000d.00000000.00000000.00000000.00000004.f006872c.0000000e
>>>> interrupt-map-mask: 00000000.00000000.00000000.00000007
>>>> #interrupt-cells: 00000001
>>>> ranges: 82000000.00000000.fff00000.82000000.00000000.fff00000.ffffffff.00200000
>>>> bus-range: 00000004.00000004
>>>> compatible: 70636965.78383038.362c3334.312e3900.70636965.78383038.362c3334.31007063.69657863.6c617373.2c303630.34303000.70636965.78636c61.73732c30.36303400
>>>> reg: 00020200.00000000.00000000.00000000.00000000
>>>> #address-cells: 00000003
>>>> #size-cells: 00000002
>>>> device_type: 'pciex'
>>>> name: 'pci'
>>>> cache-line-size: 00000010
>>>> class-code: 00060400
>>>> revision-id: 00000009
>>>> device-id: 00000341
>>>> vendor-id: 00008086
>>>>
>>>> Node 0xf0091c20
>>>> .node: f0091c20
>>>> interrupt-map: 00000002.00000080.00000001.f0071e78.00000008.00000002.00000040.00000001.f0071e78.00000009.00000002.00000000.00000001.f0071e78.0000000a.00000003.00000000.00000001.f0071e78.00000000.00000003.00000040.00000001.f0071e78.00000003
>>>> interrupt-map-mask: 00000003.000fffff.00000003
>>>> #interrupt-cells: 00000001
>>>> ranges: 00000000.00000000.000007ff.f0000000.01000000.00000001.00000000.000007ff.f1000000.01000000.00000002.00000000.000007ff.f2000000.01000000.00000003.00000000.000007ff.f3000000.01000000
>>>> revision: 00000000
>>>> #size-cells: 00000001
>>>> #address-cells: 00000002
>>>> reg: 00000400.0fc64000.00000000.00000020
>>>> portid: 0000001f
>>>> device_type: 'ebus'
>>>> compatible: 'jbus-ebus'
>>>> name: 'ebus'
>>>>
>>>> Node 0xf00927d0
>>>> .node: f00927d0
>>>> model: 'SUNW,525-2320'
>>>> version: 4f425020.342e3330.2e342032.3030392f.30382f31.39203037.3a313820.53756e20.46697265.20563231.352f5632.34350050.4f535420.342e3330.2e342032.3030392f.30382f31.39203037.3a333500.4f424449.41472034.2e33302e.34203230.30392f30.382f3139.2030373a.32392020.00
>>>> name: 'flashprom'
>>>> reg: 00000000.00000000.00200000
>>>>
>>>> Node 0xf00934ec
>>>> .node: f00934ec
>>>> ignore-cd:
>>>> reg: 00000002.00000080.00000008
>>>> interrupts: 00000001
>>>> compatible: 73753136.35353200.73753136.35353000.737500
>>>> device_type: 'serial'
>>>> name: 'serial'
>>>>
>>>> Node 0xf009504c
>>>> .node: f009504c
>>>> ignore-cd:
>>>> reg: 00000002.00000040.00000008
>>>> interrupts: 00000001
>>>> compatible: 73753136.35353200.73753136.35353000.737500
>>>> device_type: 'serial'
>>>> name: 'serial'
>>>>
>>>> Node 0xf0096bac
>>>> .node: f0096bac
>>>> reg: 00000002.00000000.00000008
>>>> interrupts: 00000001
>>>> compatible: 'rmc_comm'
>>>> device_type: 'serial'
>>>> name: 'rmc-comm'
>>>>
>>>> Node 0xf009871c
>>>> .node: f009871c
>>>> reg: 00000002.000000c0.00000001
>>>> compatible: 'pmugpio'
>>>> gpio-device-type: 'SUNW,cpld'
>>>> name: 'gpio'
>>>>
>>>> Node 0xf009880c
>>>> .node: f009880c
>>>> version: '5.10'
>>>> reg: 00000003.00000000.00000081
>>>> compatible: 'epic'
>>>> name: 'env-monitor'
>>>>
>>>> Node 0xf0098b3c
>>>> .node: f0098b3c
>>>> interrupts: 00000001
>>>> button:
>>>> reg: 00000003.00000040.00000082
>>>> power-device-type: 'SUNW,pic18lf65j10'
>>>> name: 'power'
>>>>
>>>> Node 0xf0098ea0
>>>> .node: f0098ea0
>>>> interrupt-map: 00000000.000000d0.00000001.f0071e78.00000006
>>>> interrupt-map-mask: 000000ff.000000ff.00000003
>>>> #interrupt-cells: 00000001
>>>> reg: 00000400.0fd30000.00000000.00000040
>>>> i2c-clock-val: 0000000f
>>>> portid: 0000001f
>>>> interrupts: 00000001
>>>> device_type: 'i2c'
>>>> compatible: 'fire-i2c'
>>>> #size-cells: 00000000
>>>> #address-cells: 00000002
>>>> name: 'i2c'
>>>>
>>>> Node 0xf009a59c
>>>> .node: f009a59c
>>>> reg: 00000000.00000032
>>>> compatible: 'i2c-at24c64'
>>>> device_type: 'fru-prom'
>>>> name: 'pdb-fru-prom'
>>>>
>>>> Node 0xf009a848
>>>> .node: f009a848
>>>> reg: 00000000.00000064
>>>> compatible: 'i2c-at24c64'
>>>> device_type: 'fru-prom'
>>>> name: 'sasbp-fru-prom'
>>>>
>>>> Node 0xf009aaf4
>>>> .node: f009aaf4
>>>> name: 'power-supply-fru-prom'
>>>> reg: 00000000.0000006c
>>>> compatible: 'i2c-at34c02'
>>>>
>>>> Node 0xf009ace4
>>>> .node: f009ace4
>>>> reg: 00000000.0000007c
>>>> compatible: 'i2c-pcf8574'
>>>> name: 'ioexp'
>>>>
>>>> Node 0xf009ae98
>>>> .node: f009ae98
>>>> reg: 00000000.00000080
>>>> compatible: 'i2c-pca9555'
>>>> name: 'gpio'
>>>>
>>>> Node 0xf009af58
>>>> .node: f009af58
>>>> reg: 00000000.000000a2
>>>> compatible: 'i2c-at24c64'
>>>> device_type: 'fru-prom'
>>>> name: 'motherboard-fru-prom'
>>>>
>>>> Node 0xf009b210
>>>> .node: f009b210
>>>> reg: 00000000.000000a6
>>>> compatible: 'i2c-at24c64'
>>>> device_type: 'nvram'
>>>> name: 'nvram'
>>>>
>>>> Node 0xf009b5f4
>>>> .node: f009b5f4
>>>> device_type: 'idprom'
>>>> reg: 00000000.000000a6
>>>> name: 'idprom'
>>>>
>>>> Node 0xf009bb98
>>>> .node: f009bb98
>>>> reg: 00000000.000000a8
>>>> compatible: 'i2c-at24c64'
>>>> device_type: 'fru-prom'
>>>> name: 'riser-fru-prom'
>>>>
>>>> Node 0xf009be44
>>>> .node: f009be44
>>>> reg: 00000000.000000aa
>>>> compatible: 'i2c-at24c64'
>>>> device_type: 'fru-prom'
>>>> name: 'riser-fru-prom'
>>>>
>>>> Node 0xf009c0f0
>>>> .node: f009c0f0
>>>> reg: 00000000.000000b0
>>>> compatible: 'i2c-adt7462'
>>>> name: 'hardware-monitor'
>>>>
>>>> Node 0xf009c1bc
>>>> .node: f009c1bc
>>>> reg: 00000000.000000d0
>>>> compatible: 'i2c-ds1307'
>>>> name: 'rscrtc'
>>>>
>>>> Node 0xf009c27c
>>>> .node: f009c27c
>>>> reg: 00000000.000000dc
>>>> compatible: 'i2c-ics9fg108'
>>>> name: 'clock-generator'
>>>>
>>>> Node 0xf009c34c
>>>> .node: f009c34c
>>>> reg: 00000000.000000e0
>>>> compatible: 'i2c-at34c02'
>>>> name: 'dimm-spd'
>>>>
>>>> Node 0xf009c50c
>>>> .node: f009c50c
>>>> reg: 00000000.000000e2
>>>> compatible: 'i2c-at34c02'
>>>> name: 'dimm-spd'
>>>>
>>>>
>>>>>
>>>>> If you could not boot up with 4.2-rc2, dump above information
>>>>> with 4.1.0. We want to know what the pcie tree in your machine, thanks!
>>>>>
>>>>> Thanks!
>>>>> Yijing.
>>>>>
>>>>> ^[$B:_^[(B 2015/8/13 2:56, Meelis Roos ^[$B<LF;^[(B:
>>>>>> 4.1.0 worked but 4.2-rc2 hangs on boot after switching console but
>>>>>> before reprinting dmesg to the new console. That happens on 2 of my
>>>>>> sparc64's: T2000 and V245. These happen to have the PCIe slot names in
>>>>>> sysfs so it may be related. The following commit breaks the boot at
>>>>>> least on V245 where I performed the bisection:
>>>>>>
>>>>>> d0751b98dfa391f862e02dc36a233a54615e3f1d is the first bad commit
>>>>>> commit d0751b98dfa391f862e02dc36a233a54615e3f1d
>>>>>> Author: Yijing Wang <wangyijing@huawei.com>
>>>>>> Date: Thu May 21 15:05:02 2015 +0800
>>>>>>
>>>>>> PCI: Add dev->has_secondary_link to track downstream PCIe links
>>>>>>
>>>>>> A PCIe Port is an interface to a Link. A Root Port is a PCI-PCI bridge in
>>>>>> a Root Complex and has a Link on its secondary (downstream) side. For
>>>>>> other Ports, the Link may be on either the upstream (closer to the Root
>>>>>> Complex) or downstream side of the Port.
>>>>>>
>>>>>> The usual topology has a Root Port connected to an Upstream Port. We
>>>>>> previously assumed this was the only possible topology, and that a
>>>>>> Downstream Port's Link was always on its downstream side, like this:
>>>>>>
>>>>>> +---------------------+
>>>>>> +------+ | Downstream |
>>>>>> | Root | | Upstream Port +--Link--
>>>>>> | Port +--Link--+ Port |
>>>>>> +------+ | Downstream |
>>>>>> | Port +--Link--
>>>>>> +---------------------+
>>>>>>
>>>>>> But systems do exist (see URL below) where the Root Port is connected to a
>>>>>> Downstream Port. In this case, a Downstream Port's Link may be on either
>>>>>> the upstream or downstream side:
>>>>>>
>>>>>> +---------------------+
>>>>>> +------+ | Upstream |
>>>>>> | Root | | Downstream Port +--Link--
>>>>>> | Port +--Link--+ Port |
>>>>>> +------+ | Downstream |
>>>>>> | Port +--Link--
>>>>>> +---------------------+
>>>>>>
>>>>>> We can't use the Port type to determine which side the Link is on, so add a
>>>>>> bit in struct pci_dev to keep track.
>>>>>>
>>>>>> A Root Port's Link is always on the Port's secondary side. A component
>>>>>> (Endpoint or Port) on the other end of the Link obviously has the Link on
>>>>>> its upstream side. If that component is a Port, it is part of a Switch or
>>>>>> a Bridge. A Bridge has a PCI or PCI-X bus on its secondary side, not a
>>>>>> Link. The internal bus of a Switch connects the Port to another Port whose
>>>>>> Link is on the downstream side.
>>>>>>
>>>>>> [bhelgaas: changelog, comment, cache "type", use if/else]
>>>>>> Link: http://lkml.kernel.org/r/54EB81B2.4050904@pobox.com
>>>>>> Link: https://bugzilla.kernel.org/show_bug.cgi?id”361
>>>>>> Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
>>>>>> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
>>>>>> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
>>>>>>
>>>>>> :040000 040000 3ab85bca5c0a1bdb75f7b83131482fe63110c96f dc49c2621bd450d16eea33491a27affc1dab35ce M drivers
>>>>>> :040000 040000 37493ef5238ad154ccad6a184617975e8502730e ef846910636ac2405879bcf5395e261df396e266 M include
>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>>
>
prev parent reply other threads:[~2015-08-17 8:03 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-12 18:56 bisected: boot hang on sparc64 after PCIe changes Meelis Roos
2015-08-13 1:08 ` wangyijing
2015-08-13 8:15 ` Meelis Roos
2015-08-13 10:15 ` Meelis Roos
2015-08-13 10:28 ` wangyijing
2015-08-13 10:49 ` wangyijing
2015-08-13 12:23 ` Meelis Roos
2015-08-13 12:53 ` wangyijing
2015-08-17 7:45 ` Meelis Roos
2015-08-17 8:03 ` wangyijing [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55D19546.3030103@huawei.com \
--to=wangyijing@huawei.com \
--cc=sparclinux@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.