[rtc-linux] Re: [PATCH] rtc: s5m: fix to update ctrl register

[Joonyoung Shim <jy0922.shim@samsung.com>]

On 08/21/2015 09:44 AM, Krzysztof Kozlowski wrote:
> On 21.08.2015 08:15, Alexandre Belloni wrote:
>> Hi,
>>
>> On 13/08/2015 at 17:49:24 +0900, Joonyoung Shim wrote :
>>> According to datasheet, the S2MPS13X and S2MPS14X should update write
>>> buffer via setting WUDR bit to high after ctrl register is updated.
>>>
>>> If not, ALARM interrupt of rtc-s5m doesn't happen first time when i use
>>> tools/testing/selftests/timers/rtctest.c test program and hour format is
>>> used to 12 hour mode in Odroid-XU3 board.
>>>
>>
>> >From what I understood, I should expect a v2 of tihat patch also setting
>> RUDR, is that right? OR would you prefer that I apply that one and then
>> fix RUDR in a following patch?
> 
> Right, I would expect that as well... or a comment if this is not needed.
> 

Hmm, the driver only writes control register now, so i don't feel the
need of patch setting RUDR for control register.

> Best regards,
> Krzysztof
> 
> 
>>
>>> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
>>> Cc: <stable@vger.kernel.org>
>>
>> can you update the stable tag with the kernel version introducing the
>> issue?

Sure, i think it should be v3.16.

>>
>>> ---
>>>  drivers/rtc/rtc-s5m.c | 12 ++++++++++++
>>>  1 file changed, 12 insertions(+)
>>
>>> diff --git a/drivers/rtc/rtc-s5m.c b/drivers/rtc/rtc-s5m.c
>>> index 8c70d78..03828bb 100644
>>> --- a/drivers/rtc/rtc-s5m.c
>>> +++ b/drivers/rtc/rtc-s5m.c
>>> @@ -635,6 +635,18 @@ static int s5m8767_rtc_init_reg(struct s5m_rtc_info *info)
>>>  	case S2MPS13X:
>>>  		data[0] = (0 << BCD_EN_SHIFT) | (1 << MODEL24_SHIFT);
>>>  		ret = regmap_write(info->regmap, info->regs->ctrl, data[0]);
>>> +		if (ret < 0)
>>> +			break;
>>> +
>>> +		ret = regmap_update_bits(info->regmap,
>>> +				info->regs->rtc_udr_update,
>>> +				info->regs->rtc_udr_mask,
>>> +				info->regs->rtc_udr_mask);
>>
>> Very small indentation issue here, it should be aligned with the open
>> parenthesis.

OK, i will.

Thanks.

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.