From: Christophe Ricard <christophe.ricard@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 16/28] dm: tpm: Convert the TPM command and library to driver model
Date: Mon, 24 Aug 2015 22:21:23 +0200 [thread overview]
Message-ID: <55DB7CC3.8080503@gmail.com> (raw)
In-Reply-To: <1440289904-31280-17-git-send-email-sjg@chromium.org>
Hi Simon,
This one looks good to me. Actually, i think atmel driver is trivial to move to driver model following the current TPM class.
I would assume this will be changed very soon.
Acked-by: Christophe Ricard<christophe-h.ricard@st.com>
Best Regards
Christophe
On 23/08/2015 02:31, Simon Glass wrote:
> Add driver model support to the TPM command and the TPM library. Both
> support only a single TPM at present.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> Changes in v2:
> - Correct error checking code in tpm_sendrecv_command()
> - Use tpm_ prefix instead of tis_ for TPM functions
>
> common/cmd_tpm.c | 26 ++++++++++++++++++++++++++
> include/tpm.h | 2 +-
> lib/tpm.c | 31 ++++++++++++++++++++++++++-----
> 3 files changed, 53 insertions(+), 6 deletions(-)
>
> diff --git a/common/cmd_tpm.c b/common/cmd_tpm.c
> index 0294952..bad2006 100644
> --- a/common/cmd_tpm.c
> +++ b/common/cmd_tpm.c
> @@ -6,6 +6,7 @@
>
> #include <common.h>
> #include <command.h>
> +#include <dm.h>
> #include <malloc.h>
> #include <tpm.h>
> #include <asm/unaligned.h>
> @@ -438,6 +439,21 @@ TPM_COMMAND_NO_ARG(tpm_force_clear)
> TPM_COMMAND_NO_ARG(tpm_physical_enable)
> TPM_COMMAND_NO_ARG(tpm_physical_disable)
>
> +#ifdef CONFIG_DM_TPM
> +static int get_tpm(struct udevice **devp)
> +{
> + int rc;
> +
> + rc = uclass_first_device(UCLASS_TPM, devp);
> + if (rc) {
> + printf("Could not find TPM (ret=%d)\n", rc);
> + return CMD_RET_FAILURE;
> + }
> +
> + return 0;
> +}
> +#endif
> +
> static int do_tpm_raw_transfer(cmd_tbl_t *cmdtp, int flag,
> int argc, char * const argv[])
> {
> @@ -452,7 +468,17 @@ static int do_tpm_raw_transfer(cmd_tbl_t *cmdtp, int flag,
> return CMD_RET_FAILURE;
> }
>
> +#ifdef CONFIG_DM_TPM
> + struct udevice *dev;
> +
> + rc = get_tpm(&dev);
> + if (rc)
> + return rc;
> +
> + rc = tpm_xfer(dev, command, count, response, &response_length);
> +#else
> rc = tis_sendrecv(command, count, response, &response_length);
> +#endif
> free(command);
> if (!rc) {
> puts("tpm response:\n");
> diff --git a/include/tpm.h b/include/tpm.h
> index e4472d3..445952b 100644
> --- a/include/tpm.h
> +++ b/include/tpm.h
> @@ -349,7 +349,7 @@ int tpm_xfer(struct udevice *dev, const uint8_t *sendbuf, size_t send_size,
> *
> * @return 0 on success, non-0 on error.
> */
> -uint32_t tpm_init(void);
> +int tpm_init(void);
>
> /**
> * Issue a TPM_Startup command.
> diff --git a/lib/tpm.c b/lib/tpm.c
> index d9789b0..19bf0b5 100644
> --- a/lib/tpm.c
> +++ b/lib/tpm.c
> @@ -6,10 +6,11 @@
> */
>
> #include <common.h>
> -#include <stdarg.h>
> -#include <u-boot/sha1.h>
> +#include <dm.h>
> +#include <tis.h>
> #include <tpm.h>
> #include <asm/unaligned.h>
> +#include <u-boot/sha1.h>
>
> /* Internal error of TPM command library */
> #define TPM_LIB_ERROR ((uint32_t)~0u)
> @@ -240,9 +241,20 @@ static uint32_t tpm_sendrecv_command(const void *command,
> response = response_buffer;
> response_length = sizeof(response_buffer);
> }
> +#ifdef CONFIG_DM_TPM
> + struct udevice *dev;
> + int ret;
> +
> + ret = uclass_first_device(UCLASS_TPM, &dev);
> + if (ret)
> + return ret;
> + err = tpm_xfer(dev, command, tpm_command_size(command),
> + response, &response_length);
> +#else
> err = tis_sendrecv(command, tpm_command_size(command),
> response, &response_length);
> - if (err)
> +#endif
> + if (err < 0)
> return TPM_LIB_ERROR;
> if (size_ptr)
> *size_ptr = response_length;
> @@ -250,15 +262,24 @@ static uint32_t tpm_sendrecv_command(const void *command,
> return tpm_return_code(response);
> }
>
> -uint32_t tpm_init(void)
> +int tpm_init(void)
> {
> - uint32_t err;
> + int err;
>
> +#ifdef CONFIG_DM_TPM
> + struct udevice *dev;
> +
> + err = uclass_first_device(UCLASS_TPM, &dev);
> + if (err)
> + return err;
> + return tpm_open(dev);
> +#else
> err = tis_init();
> if (err)
> return err;
>
> return tis_open();
> +#endif
> }
>
> uint32_t tpm_startup(enum tpm_startup_type mode)
next prev parent reply other threads:[~2015-08-24 20:21 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-23 0:31 [U-Boot] [PATCH v2 00/28] dm: Convert TPM drivers to driver model Simon Glass
2015-08-23 0:31 ` [U-Boot] [PATCH v2 01/28] tpm: Remove old pre-driver-model I2C code Simon Glass
2015-08-24 4:50 ` Heiko Schocher
2015-08-24 4:52 ` Simon Glass
2015-08-24 5:15 ` Heiko Schocher
2015-08-30 22:42 ` Simon Glass
2015-08-23 0:31 ` [U-Boot] [PATCH v2 02/28] tpm: Drop two unused options Simon Glass
2015-08-30 22:42 ` Simon Glass
2015-08-23 0:31 ` [U-Boot] [PATCH v2 03/28] tpm: Add Kconfig options for TPMs Simon Glass
2015-08-24 20:24 ` Christophe Ricard
2015-08-30 22:42 ` Simon Glass
2015-08-23 0:31 ` [U-Boot] [PATCH v2 04/28] tpm: Convert board config TPM options to Kconfig Simon Glass
2015-08-24 20:20 ` Christophe Ricard
2015-08-30 22:43 ` Simon Glass
2015-08-23 0:31 ` [U-Boot] [PATCH v2 05/28] tpm: Convert drivers to use SPDX Simon Glass
2015-08-30 22:43 ` Simon Glass
2015-08-23 0:31 ` [U-Boot] [PATCH v2 06/28] tpm: Move the I2C TPM code into one file Simon Glass
2015-08-24 20:24 ` Christophe Ricard
2015-08-25 4:13 ` Simon Glass
2015-08-25 18:38 ` Christophe Ricard
2015-08-30 22:43 ` Simon Glass
2015-08-23 0:31 ` [U-Boot] [PATCH v2 07/28] tpm: tpm_tis_i2c: Drop unnecessary methods Simon Glass
2015-08-30 22:43 ` Simon Glass
2015-08-23 0:31 ` [U-Boot] [PATCH v2 08/28] tpm: tpm_tis_i2c: Drop struct tpm_vendor_specific Simon Glass
2015-08-30 22:43 ` Simon Glass
2015-08-23 0:31 ` [U-Boot] [PATCH v2 09/28] tpm: tpm_tis_i2c: Merge struct tpm_dev into tpm_chip Simon Glass
2015-08-30 22:43 ` Simon Glass
2015-08-23 0:31 ` [U-Boot] [PATCH v2 10/28] tpm: tpm_tis_i2c: Merge struct tpm " Simon Glass
2015-08-30 22:43 ` Simon Glass
2015-08-23 0:31 ` [U-Boot] [PATCH v2 11/28] tpm: tpm_tis_i2c: Move definitions into the header file Simon Glass
2015-08-30 22:43 ` Simon Glass
2015-08-23 0:31 ` [U-Boot] [PATCH v2 12/28] tpm: tpm_tis_i2c: Simplify init code Simon Glass
2015-08-24 20:20 ` Christophe Ricard
2015-08-30 22:43 ` Simon Glass
2015-08-23 0:31 ` [U-Boot] [PATCH v2 13/28] tpm: tpm_tis_i2c: Use a consistent tpm_tis_i2c_ prefix Simon Glass
2015-08-30 22:43 ` Simon Glass
2015-08-23 0:31 ` [U-Boot] [PATCH v2 14/28] tpm: tpm_tis_i2c: Tidy up delays Simon Glass
2015-08-30 22:43 ` Simon Glass
2015-08-23 0:31 ` [U-Boot] [PATCH v2 15/28] dm: tpm: Add a uclass for Trusted Platform Modules Simon Glass
2015-08-24 20:21 ` Christophe Ricard
2015-08-30 22:43 ` Simon Glass
2015-08-23 0:31 ` [U-Boot] [PATCH v2 16/28] dm: tpm: Convert the TPM command and library to driver model Simon Glass
2015-08-24 20:21 ` Christophe Ricard [this message]
2015-08-30 22:43 ` Simon Glass
2015-08-23 0:31 ` [U-Boot] [PATCH v2 17/28] dm: i2c: Add a command to adjust the offset length Simon Glass
2015-08-24 20:21 ` Christophe Ricard
2015-08-30 22:43 ` Simon Glass
2015-08-23 0:31 ` [U-Boot] [PATCH v2 18/28] tpm: Report tpm errors on the command line Simon Glass
2015-08-24 20:21 ` Christophe Ricard
2015-08-30 22:43 ` Simon Glass
2015-08-23 0:31 ` [U-Boot] [PATCH v2 19/28] dm: tpm: sandbox: Convert TPM driver to driver model Simon Glass
2015-08-30 22:43 ` Simon Glass
2015-08-23 0:31 ` [U-Boot] [PATCH v2 20/28] tpm: Check that parse_byte_string() has data to parse Simon Glass
2015-08-24 20:22 ` Christophe Ricard
2015-08-25 4:13 ` Simon Glass
2015-08-25 18:40 ` Christophe Ricard
2015-08-30 22:43 ` Simon Glass
2015-08-23 0:31 ` [U-Boot] [PATCH v2 21/28] exynos: x86: dts: Add tpm nodes to the device tree for Chrome OS devices Simon Glass
2015-08-24 20:22 ` Christophe Ricard
2015-08-30 22:43 ` Simon Glass
2015-08-23 0:31 ` [U-Boot] [PATCH v2 22/28] dm: tpm: Convert I2C driver to driver model Simon Glass
2015-08-24 20:22 ` Christophe Ricard
2015-08-30 22:44 ` Simon Glass
2015-08-23 0:31 ` [U-Boot] [PATCH v2 23/28] dm: tpm: Convert LPC " Simon Glass
2015-08-24 20:23 ` Christophe Ricard
2015-08-30 22:44 ` Simon Glass
2015-08-23 0:31 ` [U-Boot] [PATCH v2 24/28] tpm: Add a 'tpm info' command Simon Glass
2015-08-30 22:44 ` Simon Glass
2015-08-23 0:31 ` [U-Boot] [PATCH v2 25/28] tpm: Add functions to access flags and permissions Simon Glass
2015-08-24 20:23 ` Christophe Ricard
2015-08-30 22:44 ` Simon Glass
2015-08-23 0:31 ` [U-Boot] [PATCH v2 26/28] dm: tpm: Add a 'tpmtest' command Simon Glass
2015-08-24 20:23 ` Christophe Ricard
2015-08-30 22:44 ` Simon Glass
2015-08-23 0:31 ` [U-Boot] [PATCH v2 27/28] tpm: Enable 'tpmtest' command for Chrome OS boards with TPMs Simon Glass
2015-08-24 20:23 ` Christophe Ricard
2015-08-30 22:44 ` Simon Glass
2015-08-23 0:31 ` [U-Boot] [PATCH v2 28/28] tegra: nyan: Enable TPM command and driver Simon Glass
2015-08-30 22:44 ` Simon Glass
2015-08-24 20:20 ` [U-Boot] [PATCH v2 00/28] dm: Convert TPM drivers to driver model Christophe Ricard
2015-08-25 4:13 ` Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55DB7CC3.8080503@gmail.com \
--to=christophe.ricard@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.