From: Jaehoon Chung <jh80.chung@samsung.com>
To: Krzysztof Kozlowski <k.kozlowski@samsung.com>,
linux-samsung-soc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
Kukjin Kim <kgene@kernel.org>
Subject: Re: [PATCH] ARM: dts: use vqmmc-supply of emmc/sd for exynos4412-odroid-common
Date: Fri, 28 Aug 2015 10:48:56 +0900 [thread overview]
Message-ID: <55DFBE08.9090603@samsung.com> (raw)
In-Reply-To: <55DF0204.1010604@samsung.com>
On 08/27/2015 09:26 PM, Krzysztof Kozlowski wrote:
> W dniu 27.08.2015 o 18:29, Jaehoon Chung pisze:
>> Currently vmmc's property is wrong.
>> If it needs to control two supplies, then it has to use vmmc/vqmmc-supply.
>> (Card supply power and I/O Line supply Power.)
>>
>> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
>> ---
>> arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 7 ++++---
>> 1 file changed, 4 insertions(+), 3 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
>> index ca7d168..4ddabfd 100644
>> --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
>> +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
>> @@ -461,10 +461,10 @@
>> &mshc_0 {
>> pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
>> pinctrl-names = "default";
>> - vmmc-supply = <&ldo20_reg &buck8_reg>;
>> + vmmc-supply = <&ldo20_reg>;
>> + vqmmc-supply = <&buck8_reg>;
>
> Shouldn't this be reversed? LDO20 has 1.8V and it goes to MMC connector,
> so it should be VQMMC?
If my schematics is right thing, buck8 is used LAN card power.
I will send after removing buck8_reg. how about?
Anyway, Thanks for pointing out. :)
I don't know who this regulator applied. I have guessed that it used for eMMC.
Sorry for guessing.
Best Regards,
Jaehoon Chung
>
> In the same time I can't find on schematics where BUCK8 goes...
>
> The SDHCI_2 node below looks good.
>
> Best regards,
> Krzysztof
>
>> mmc-pwrseq = <&emmc_pwrseq>;
>> status = "okay";
>> -
>> num-slots = <1>;
>> broken-cd;
>> card-detect-delay = <200>;
>> @@ -485,7 +485,8 @@
>> bus-width = <4>;
>> pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
>> pinctrl-names = "default";
>> - vmmc-supply = <&ldo4_reg &ldo21_reg>;
>> + vmmc-supply = <&ldo21_reg>;
>> + vqmmc-supply = <&ldo4_reg>;
>> cd-gpios = <&gpk2 2 0>;
>> cd-inverted;
>> status = "okay";
>>
>
>
>
next prev parent reply other threads:[~2015-08-28 1:48 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-27 9:29 [PATCH] ARM: dts: use vqmmc-supply of emmc/sd for exynos4412-odroid-common Jaehoon Chung
2015-08-27 10:03 ` Javier Martinez Canillas
2015-08-27 12:26 ` Krzysztof Kozlowski
2015-08-28 1:48 ` Jaehoon Chung [this message]
[not found] ` <55DFBE08.9090603-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2015-08-28 1:56 ` Krzysztof Kozlowski
2015-08-28 1:56 ` Krzysztof Kozlowski
2015-08-28 16:10 ` Tobias Jakobi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55DFBE08.9090603@samsung.com \
--to=jh80.chung@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=k.kozlowski@samsung.com \
--cc=kgene@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.