Re: mlx4 problems with 4.2-rc8

[Doug Ledford <dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>]

[-- Attachment #1.1: Type: text/plain, Size: 5560 bytes --]

On 08/29/2015 09:13 PM, Or Gerlitz wrote:
> On Fri, Aug 28, 2015 at 10:27 PM, Doug Ledford <dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> wrote:
>> I'm seeing this with rc8 on a dual port mlx4 adapter set to IB/Eth mode:
> 
> mmm, both Amir and myself are just finishing vacations... so WB notes
> are not always lovely as you want them to be, life
>>
>> [   77.883513] IPv6: ADDRCONF(NETDEV_UP): mlx4_roce: link is not ready
>> [   77.892044] mlx4_en: mlx4_roce:   frag:0 - size:1518 prefix:0 stride:1536
>> [   77.903129] genirq: Flags mismatch irq 135. 00000000
>> (mlx4-65@0000:05:00.0) vs. 00000000 (mlx4-65@0000:05:00.0)
> 
> is this strict regression from some known point in the past on this
> system/config -- i.e 4.1 or 4.2-rc1?!

Yes.  When I was submitting the 4.2-rc changes this machine worked.
This is one of my IB/Eth SRIOV machines.  I tested with SRIOV disabled
and it didn't effect things.

> Can you please send the mlx4 driver output when you load it with debug
> prints on? also do things work if you set the ports type to be ib/ib
> or eth/eth?

It should work as ib/ib given that in ib/eth mode the ib port works.  I
doubt eth/eth would work, but I'll try and see.  OK, Eth/Eth mode fails
too (at least on the second port, I can say on the first port for
certain as I can't bring it up, it's still plugged into an IB switch).
However, now in Eth/Eth mode, attempts to bring up the interface
manually at the command line have hung, which it didn't do in IB/Eth mode.

I'll try to ping things down further, but that's what I have so far.

And as requested, the config is attached.

> 
> send us your compressed .config
> 
> Matan, any idea what goes wrong here?
> 
> Or.
> 
> 
> 
>> [   77.914965] CPU: 0 PID: 1541 Comm: NetworkManager Not tainted
>> 4.2.0-rc8 #58
>> [   77.923292] Hardware name: Dell Inc. PowerEdge R820/04K5X5, BIOS
>> 2.2.3 07/09/2014
>> [   77.932205]  0000000000000000 00000000c16e3ce1 ffff8820365ab498
>> ffffffff8167e6ff
>> [   77.941072]  0000000000000000 ffff8820339e9a00 ffff8820365ab4f8
>> ffffffff810d2b6e
>> [   77.949938]  0000000000000246 ffff881032e67aa4 ffff881035e10ba0
>> 00000000c16e3ce1
>> [   77.958812] Call Trace:
>> [   77.962109]  [<ffffffff8167e6ff>] dump_stack+0x45/0x57
>> [   77.968412]  [<ffffffff810d2b6e>] __setup_irq+0x51e/0x590
>> [   77.975018]  [<ffffffffc03870a0>] ? mlx4_interrupt+0x80/0x80 [mlx4_core]
>> [   77.983072]  [<ffffffff810d2d64>] request_threaded_irq+0xf4/0x1a0
>> [   77.990468]  [<ffffffffc0385d55>] mlx4_assign_eq+0x135/0x360 [mlx4_core]
>> [   77.998513]  [<ffffffffc0537537>] mlx4_en_activate_cq+0x2a7/0x310
>> [mlx4_en]
>> [   78.006853]  [<ffffffff8130a2c8>] ? alloc_cpumask_var_node+0x28/0x40
>> [   78.014542]  [<ffffffff8131e8b9>] ? find_next_bit+0x19/0x20
>> [   78.021334]  [<ffffffff8130a284>] ? cpumask_next_and+0x34/0x50
>> [   78.028425]  [<ffffffffc053ae6b>] mlx4_en_start_port+0x1bb/0xb60
>> [mlx4_en]
>> [   78.036689]  [<ffffffffc037fe01>] ? mlx4_free_cmd_mailbox+0x31/0x40
>> [mlx4_core]
>> [   78.045435]  [<ffffffffc053bb59>] mlx4_en_open+0x349/0x630 [mlx4_en]
>> [   78.053107]  [<ffffffff815732f9>] __dev_open+0xc9/0x140
>> [   78.059538]  [<ffffffff81573621>] __dev_change_flags+0xa1/0x160
>> [   78.066718]  [<ffffffff81573709>] dev_change_flags+0x29/0x60
>> [   78.073602]  [<ffffffff81580dbe>] do_setlink+0x5be/0xa70
>> [   78.080097]  [<ffffffffc01b158f>] ? mga_imageblit+0x2f/0x40 [mgag200]
>> [   78.087859]  [<ffffffffc01b1456>] ? mga_dirty_update+0x1e6/0x2f0
>> [mgag200]
>> [   78.096112]  [<ffffffffc01b158f>] ? mga_imageblit+0x2f/0x40 [mgag200]
>> [   78.103873]  [<ffffffff81582470>] rtnl_newlink+0x4f0/0x880
>> [   78.110586]  [<ffffffff81582073>] ? rtnl_newlink+0xf3/0x880
>> [   78.117372]  [<ffffffff81294238>] ? security_capable+0x48/0x60
>> [   78.124452]  [<ffffffff81081b1d>] ? ns_capable+0x2d/0x60
>> [   78.130950]  [<ffffffff8157f8c4>] rtnetlink_rcv_msg+0xa4/0x250
>> [   78.138028]  [<ffffffff812987c0>] ? sock_has_perm+0x70/0x90
>> [   78.144824]  [<ffffffff8157f820>] ? rtnetlink_rcv+0x40/0x40
>> [   78.151615]  [<ffffffff815a2bdf>] netlink_rcv_skb+0xaf/0xc0
>> [   78.158425]  [<ffffffff8157f80c>] rtnetlink_rcv+0x2c/0x40
>> [   78.164997]  [<ffffffff815a22d1>] netlink_unicast+0x101/0x1f0
>> [   78.171937]  [<ffffffff815a27c1>] netlink_sendmsg+0x401/0x660
>> [   78.178867]  [<ffffffff81553e78>] sock_sendmsg+0x38/0x50
>> [   78.185335]  [<ffffffff815547d5>] ___sys_sendmsg+0x275/0x290
>> [   78.192176]  [<ffffffff81262c56>] ? sysctl_head_finish+0x46/0x50
>> [   78.199411]  [<ffffffff81262e08>] ? proc_sys_call_handler+0x88/0xe0
>> [   78.206946]  [<ffffffff8131854c>] ? lockref_put_or_lock+0x4c/0x80
>> [   78.214296]  [<ffffffff81555197>] __sys_sendmsg+0x57/0xa0
>> [   78.220878]  [<ffffffff815551f2>] SyS_sendmsg+0x12/0x20
>> [   78.227283]  [<ffffffff8168536e>] entry_SYSCALL_64_fastpath+0x12/0x71
>> [   78.235114] mlx4_en 0000:05:00.0: Failed assigning an EQ to
>> \xfffffff\xffffffb6Z6
>> \xffffff88\xffffffff\xffffffff\xffffff84\xffffffa20\xffffff81\xffffffff\xffffffff\xffffffff\xffffffff
>> [   78.243732] mlx4_en: mlx4_roce: Failed activating Rx CQ
>> [   78.319027] mlx4_en: mlx4_roce: Failed starting port:2
>>
>> The interface in question is unusable.
>>
>> --
>> Doug Ledford <dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
>>               GPG KeyID: 0E572FDD
>>
>>


-- 
Doug Ledford <dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
              GPG KeyID: 0E572FDD


[-- Attachment #1.2: config.gz --]
[-- Type: application/gzip, Size: 35252 bytes --]

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 884 bytes --]