Porting MIPS IRQ handler to ARM

[f.fainelli@gmail.com (Florian Fainelli)]

On 01/09/15 09:14, Mason wrote:
> Hello,
> 
> I'm trying to port to my ARM platform: IRQ handling code written for MIPS.
> 
> https://github.com/mansr/linux-tangox/blob/master/drivers/irqchip/irq-tangox.c

On MIPS, you usually have a built-in interrupt controller in the CPU off
which you can have as many interrupt controllers which are SoC-specific.
This means that you typically register a cascading handler for one of
the MIPS HW interrupts (typically 2 and 3).

Calling clear_c0_status() and write_c0_status() in tangox_irq_handler()
sounds like a layering violation here, this should be taken care of by
the interrupt code once proper parenting between the MIPS IRQ controller
and your tangox controller is established.

You could take a look at drivers/irqchip/irq-bcm7038-l1.c and
arch/mips/bmips/irq.c for an example of an interrupt controller that
works on both ARM and MIPS.

> 
> static void tangox_irq_handler(unsigned int irq, struct irq_desc *desc)
> {
> 	struct irq_domain *dom = irq_desc_get_handler_data(desc);
> 	struct tangox_irq_chip *chip = dom->host_data;
> 	unsigned int status, status_hi;
> 	unsigned int sr = 0;
> 
> 	status = intc_readl(chip, chip->ctl + IRQ_STATUS);
> 	status_hi = intc_readl(chip, chip->ctl + IRQ_CTL_HI + IRQ_STATUS);
> 
> 	if (!(status | status_hi)) {
> 		spurious_interrupt();
> 		return;
> 	}
> 
> 	if (chip->mask)
> 		sr = clear_c0_status(chip->mask);
> 
> 	tangox_dispatch_irqs(dom, status, 0);
> 	tangox_dispatch_irqs(dom, status_hi, 32);
> 
> 	if (chip->mask)
> 		write_c0_status(sr);
> }
> 
>   CC      drivers/irqchip/irq-tangox.o
> drivers/irqchip/irq-tangox.c: In function 'tangox_irq_handler':
> drivers/irqchip/irq-tangox.c:85:3: error: implicit declaration of function 'spurious_interrupt' [-Werror=implicit-function-declaration]
>    spurious_interrupt();
>    ^
> drivers/irqchip/irq-tangox.c:90:3: error: implicit declaration of function 'clear_c0_status' [-Werror=implicit-function-declaration]
>    sr = clear_c0_status(chip->mask);
>    ^
> drivers/irqchip/irq-tangox.c:96:3: error: implicit declaration of function 'write_c0_status' [-Werror=implicit-function-declaration]
>    write_c0_status(sr);
>    ^
> drivers/irqchip/irq-tangox.c: In function 'tangox_irq_init':
> drivers/irqchip/irq-tangox.c:205:41: error: 'STATUSB_IP2' undeclared (first use in this function)
>   chip->mask = ((1 << (irq - 2)) - 1) << STATUSB_IP2;
>                                          ^
> drivers/irqchip/irq-tangox.c:205:41: note: each undeclared identifier is reported only once for each function it appears in
> 
> 
> In arch/mips/kernel/irq.c
> 
> atomic_t irq_err_count;
> 
> int arch_show_interrupts(struct seq_file *p, int prec)
> {
> 	seq_printf(p, "%*s: %10u\n", prec, "ERR", atomic_read(&irq_err_count));
> 	return 0;
> }
> 
> asmlinkage void spurious_interrupt(void)
> {
> 	atomic_inc(&irq_err_count);
> }
> 
> 
> In arch/arm/kernel/irq.c
> 
> unsigned long irq_err_count;
> 
> int arch_show_interrupts(struct seq_file *p, int prec)
> {
> #ifdef CONFIG_FIQ
> 	show_fiq_list(p, prec);
> #endif
> #ifdef CONFIG_SMP
> 	show_ipi_list(p, prec);
> #endif
> 	seq_printf(p, "%*s: %10lu\n", prec, "Err", irq_err_count);
> 	return 0;
> }
> 
> static inline void ack_bad_irq(int irq)
> {
> 	extern unsigned long irq_err_count;
> 	irq_err_count++;
> 	pr_crit("unexpected IRQ trap at vector %02x\n", irq);
> }
> 
> 
> Replacing spurious_interrupt() with ack_bad_irq() doesn't feel correct.
> (Writing to the console from an IRQ handler can't be good?)
> 
> It's the same interrupt controller hardware on the MIPS and ARM platforms.
> Are there platform-agnostic / generic alternatives?
> 
> 
> In arch/mips/include/asm/mipsregs.h
> 
> /*
>  * Manipulate bits in a c0 register.
>  */
> #define __BUILD_SET_C0(name)
> set_c0_##name
> clear_c0_##name
> change_c0_##name
> __BUILD_SET_C0(status)
> 
> #define read_c0_status()	__read_32bit_c0_register($12, 0)
> #define write_c0_status(val)	__write_32bit_c0_register($12, 0, val)
> 
> Obviously very platform-specific...
> Guess I'll have to take a look at the MIPS programmer's guide.
> 
> Regards.
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 


-- 
Florian