From: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
To: balbi-l0cyMroinI0@public.gmane.org
Cc: tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org,
Joao.Pinto-HKixBCOQz3hWk0Htik3J/w@public.gmane.org,
sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org,
peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org,
jun.li-KZfg59tc24xl57MIdRCFDg@public.gmane.org,
linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH v4 4/9] usb: dwc3: core: Adapt to named interrupts
Date: Thu, 3 Sep 2015 15:46:43 +0300 [thread overview]
Message-ID: <55E84133.9070704@ti.com> (raw)
In-Reply-To: <20150902143457.GF8299-HgARHv6XitJaoMGHk7MhZQC/G2K4zDHf@public.gmane.org>
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
On 02/09/15 17:34, Felipe Balbi wrote:
> On Wed, Sep 02, 2015 at 05:24:19PM +0300, Roger Quadros wrote:
>> From: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>
>>
>> Add support to use interrupt names,
>>
>> Following are the interrupt names
>>
>> Peripheral Interrupt - peripheral
>> HOST Interrupt - host
>> OTG Interrupt - otg
>>
>> [Roger Q]
>> - If any of these are missing we use the
>> first available IRQ resource so that we don't
>> break with older DTBs.
>
> this is what original commit did:
>
> commit ecd5f71cfd663bcd4efd2f29824acd8b2ba9715d
> Author: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>
> Date: Fri Jan 3 13:49:38 2014 -0600
>
> usb: dwc3: cleanup IRQ resources
>
> In order to make it easier for the driver to
> figure out which modes of operation it has,
> and because some dwc3 integrations have rather
> fuzzy IRQ routing, we now require three different
> IRQ numbers (peripheral, host, otg).
>
> In order to do that and maintain backwards compatibility,
> we still maintain support for the old IRQ resource name,
> but if you *really* want to have proper peripheral/host/otg
> support, you should make sure your resources are correct.
>
> Signed-off-by: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>
This is better since we request the resource only if needed and bail out
if it is not present.
>
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 60580a01cdd2..1f01031873b7 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -556,10 +556,22 @@ static int dwc3_core_get_phy(struct dwc3 *dwc)
> static int dwc3_core_init_mode(struct dwc3 *dwc)
> {
> struct device *dev = dwc->dev;
> + struct platform_device *pdev = to_platform_device(dev);
> int ret;
>
> switch (dwc->dr_mode) {
> case USB_DR_MODE_PERIPHERAL:
> + dwc->gadget_irq = platform_get_irq_byname(pdev, "dwc3_peripheral");
Shall we just name it just "peripheral"?
> + if (dwc->gadget_irq < 0) {
> + dwc->gadget_irq = platform_get_irq_byname(pdev, "dwc_usb3");
How will this work? Currently we don't have a name for the IRQ in the DT.
> + if (dwc->gadget_irq < 0) {
> + dev_err(dev, "missing IRQ\n");
> + return dwc->gadget_irq;
> + } else {
> + dev_warn(dev, "dwc_usb3 resource is deprecated\n");
Do we want to warn about legacy nodes?
> + }
> + }
> +
> dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
> ret = dwc3_gadget_init(dwc);
> if (ret) {
> @@ -568,6 +580,22 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
> }
> break;
> case USB_DR_MODE_HOST:
> + dwc->xhci_irq = platform_get_irq_byname(pdev, "dwc3_host");
> + if (dwc->xhci_irq < 0) {
> + dwc->xhci_irq = platform_get_irq_byname(pdev, "dwc_usb3");
> + if (dwc->xhci_irq < 0) {
> + dev_err(dev, "missing Host IRQ\n");
> + return dwc->xhci_irq;
> + } else {
> + dev_warn(dev, "dwc_usb3 resource is deprecated\n");
> + }
> +
> + dwc->xhci_resources[1].start = dwc->xhci_irq;
> + dwc->xhci_resources[1].end = dwc->xhci_irq;
> + dwc->xhci_resources[1].flags = IORESOURCE_IRQ;
> + dwc->xhci_resources[1].name = "xhci";
> + }
> +
> dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_HOST);
> ret = dwc3_host_init(dwc);
> if (ret) {
> @@ -576,6 +604,28 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
> }
> break;
> case USB_DR_MODE_OTG:
> + dwc->gadget_irq = platform_get_irq_byname(pdev, "dwc3_peripheral");
> + if (dwc->gadget_irq < 0) {
> + dwc->gadget_irq = platform_get_irq_byname(pdev, "dwc_usb3");
> + if (dwc->gadget_irq < 0) {
> + dev_err(dev, "missing IRQ\n");
> + return dwc->gadget_irq;
> + } else {
> + dev_warn(dev, "dwc_usb3 resource is deprecated\n");
> + }
> +
> + dwc->xhci_irq = dwc->gadget_irq;
> + dwc->otg_irq = dwc->gadget_irq;
> + } else {
> + dwc->xhci_irq = platform_get_irq_byname(pdev, "dwc3_host");
> + if (dwc->xhci_irq < 0) {
> + dev_err(dev, "missing Host IRQ\n");
> + return dwc->xhci_irq;
> + }
> +
> + dwc->otg_irq = platform_get_irq_byname(pdev, "dwc3_otg");
need to check if error?
> + }
Need to setup xhci_resource[1]?
> +
> dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG);
> ret = dwc3_otg_init(dwc);
> if (ret) {
> @@ -647,18 +697,6 @@ static int dwc3_probe(struct platform_device *pdev)
> dwc->mem = mem;
> dwc->dev = dev;
>
> - res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> - if (!res) {
> - dev_err(dev, "missing IRQ\n");
> - return -ENODEV;
> - }
> - dwc->xhci_resources[1].start = res->start;
> - dwc->xhci_resources[1].end = res->end;
> - dwc->xhci_resources[1].flags = res->flags;
> - dwc->xhci_resources[1].name = res->name;
> -
> - dwc->otg_irq = platform_get_irq_byname(pdev, "dwc3_otg");
> -
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> if (!res) {
> dev_err(dev, "missing memory resource\n");
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index 8e2e579b4b1e..0b02186fad6f 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -671,6 +671,8 @@ struct dwc3_scratchpad_array {
> * @maximum_speed: maximum speed requested (mainly for testing purposes)
> * @revision: revision register contents
> * @dr_mode: requested mode of operation
> + * @gadget_irq: IRQ number for Peripheral IRQs
> + * @xhci_irq: IRQ number for Host IRQs
> * @otg_irq: IRQ number for OTG IRQs
> * @usb2_phy: pointer to USB2 PHY
> * @usb3_phy: pointer to USB3 PHY
> @@ -747,6 +749,8 @@ struct dwc3 {
>
> enum usb_dr_mode dr_mode;
>
> + int gadget_irq;
> + int xhci_irq;
> int otg_irq;
>
> /* used for suspend/resume */
> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index a8cf87b3de01..2a6e5155fc89 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -1567,15 +1567,13 @@ static int dwc3_gadget_start(struct usb_gadget *g,
> struct dwc3_ep *dep;
> unsigned long flags;
> int ret = 0;
> - int irq;
> u32 reg;
>
> - irq = platform_get_irq(to_platform_device(dwc->dev), 0);
> - ret = request_threaded_irq(irq, dwc3_interrupt, dwc3_thread_interrupt,
> - IRQF_SHARED, "dwc3", dwc);
> + ret = request_threaded_irq(dwc->gadget_irq, dwc3_interrupt,
> + dwc3_thread_interrupt, IRQF_SHARED, "dwc3", dwc);
> if (ret) {
> dev_err(dwc->dev, "failed to request irq #%d --> %d\n",
> - irq, ret);
> + dwc->gadget_irq, ret);
> goto err0;
> }
>
> @@ -1668,7 +1666,7 @@ err2:
> err1:
> spin_unlock_irqrestore(&dwc->lock, flags);
>
> - free_irq(irq, dwc);
> + free_irq(dwc->gadget_irq, dwc);
>
> err0:
> return ret;
> @@ -1679,7 +1677,6 @@ static int dwc3_gadget_stop(struct usb_gadget *g,
> {
> struct dwc3 *dwc = gadget_to_dwc(g);
> unsigned long flags;
> - int irq;
>
> spin_lock_irqsave(&dwc->lock, flags);
>
> @@ -1691,8 +1688,7 @@ static int dwc3_gadget_stop(struct usb_gadget *g,
>
> spin_unlock_irqrestore(&dwc->lock, flags);
>
> - irq = platform_get_irq(to_platform_device(dwc->dev), 0);
> - free_irq(irq, dwc);
> + free_irq(dwc->gadget_irq, dwc);
>
> return 0;
> }
>
- --
cheers,
- -roger
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=M0TG
-----END PGP SIGNATURE-----
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Roger Quadros <rogerq@ti.com>
To: <balbi@ti.com>
Cc: <tony@atomide.com>, <Joao.Pinto@synopsys.com>,
<sergei.shtylyov@cogentembedded.com>, <peter.chen@freescale.com>,
<jun.li@freescale.com>, <linux-usb@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <linux-omap@vger.kernel.org>
Subject: Re: [PATCH v4 4/9] usb: dwc3: core: Adapt to named interrupts
Date: Thu, 3 Sep 2015 15:46:43 +0300 [thread overview]
Message-ID: <55E84133.9070704@ti.com> (raw)
In-Reply-To: <20150902143457.GF8299@saruman.tx.rr.com>
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
On 02/09/15 17:34, Felipe Balbi wrote:
> On Wed, Sep 02, 2015 at 05:24:19PM +0300, Roger Quadros wrote:
>> From: Felipe Balbi <balbi@ti.com>
>>
>> Add support to use interrupt names,
>>
>> Following are the interrupt names
>>
>> Peripheral Interrupt - peripheral
>> HOST Interrupt - host
>> OTG Interrupt - otg
>>
>> [Roger Q]
>> - If any of these are missing we use the
>> first available IRQ resource so that we don't
>> break with older DTBs.
>
> this is what original commit did:
>
> commit ecd5f71cfd663bcd4efd2f29824acd8b2ba9715d
> Author: Felipe Balbi <balbi@ti.com>
> Date: Fri Jan 3 13:49:38 2014 -0600
>
> usb: dwc3: cleanup IRQ resources
>
> In order to make it easier for the driver to
> figure out which modes of operation it has,
> and because some dwc3 integrations have rather
> fuzzy IRQ routing, we now require three different
> IRQ numbers (peripheral, host, otg).
>
> In order to do that and maintain backwards compatibility,
> we still maintain support for the old IRQ resource name,
> but if you *really* want to have proper peripheral/host/otg
> support, you should make sure your resources are correct.
>
> Signed-off-by: Felipe Balbi <balbi@ti.com>
This is better since we request the resource only if needed and bail out
if it is not present.
>
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 60580a01cdd2..1f01031873b7 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -556,10 +556,22 @@ static int dwc3_core_get_phy(struct dwc3 *dwc)
> static int dwc3_core_init_mode(struct dwc3 *dwc)
> {
> struct device *dev = dwc->dev;
> + struct platform_device *pdev = to_platform_device(dev);
> int ret;
>
> switch (dwc->dr_mode) {
> case USB_DR_MODE_PERIPHERAL:
> + dwc->gadget_irq = platform_get_irq_byname(pdev, "dwc3_peripheral");
Shall we just name it just "peripheral"?
> + if (dwc->gadget_irq < 0) {
> + dwc->gadget_irq = platform_get_irq_byname(pdev, "dwc_usb3");
How will this work? Currently we don't have a name for the IRQ in the DT.
> + if (dwc->gadget_irq < 0) {
> + dev_err(dev, "missing IRQ\n");
> + return dwc->gadget_irq;
> + } else {
> + dev_warn(dev, "dwc_usb3 resource is deprecated\n");
Do we want to warn about legacy nodes?
> + }
> + }
> +
> dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
> ret = dwc3_gadget_init(dwc);
> if (ret) {
> @@ -568,6 +580,22 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
> }
> break;
> case USB_DR_MODE_HOST:
> + dwc->xhci_irq = platform_get_irq_byname(pdev, "dwc3_host");
> + if (dwc->xhci_irq < 0) {
> + dwc->xhci_irq = platform_get_irq_byname(pdev, "dwc_usb3");
> + if (dwc->xhci_irq < 0) {
> + dev_err(dev, "missing Host IRQ\n");
> + return dwc->xhci_irq;
> + } else {
> + dev_warn(dev, "dwc_usb3 resource is deprecated\n");
> + }
> +
> + dwc->xhci_resources[1].start = dwc->xhci_irq;
> + dwc->xhci_resources[1].end = dwc->xhci_irq;
> + dwc->xhci_resources[1].flags = IORESOURCE_IRQ;
> + dwc->xhci_resources[1].name = "xhci";
> + }
> +
> dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_HOST);
> ret = dwc3_host_init(dwc);
> if (ret) {
> @@ -576,6 +604,28 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
> }
> break;
> case USB_DR_MODE_OTG:
> + dwc->gadget_irq = platform_get_irq_byname(pdev, "dwc3_peripheral");
> + if (dwc->gadget_irq < 0) {
> + dwc->gadget_irq = platform_get_irq_byname(pdev, "dwc_usb3");
> + if (dwc->gadget_irq < 0) {
> + dev_err(dev, "missing IRQ\n");
> + return dwc->gadget_irq;
> + } else {
> + dev_warn(dev, "dwc_usb3 resource is deprecated\n");
> + }
> +
> + dwc->xhci_irq = dwc->gadget_irq;
> + dwc->otg_irq = dwc->gadget_irq;
> + } else {
> + dwc->xhci_irq = platform_get_irq_byname(pdev, "dwc3_host");
> + if (dwc->xhci_irq < 0) {
> + dev_err(dev, "missing Host IRQ\n");
> + return dwc->xhci_irq;
> + }
> +
> + dwc->otg_irq = platform_get_irq_byname(pdev, "dwc3_otg");
need to check if error?
> + }
Need to setup xhci_resource[1]?
> +
> dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG);
> ret = dwc3_otg_init(dwc);
> if (ret) {
> @@ -647,18 +697,6 @@ static int dwc3_probe(struct platform_device *pdev)
> dwc->mem = mem;
> dwc->dev = dev;
>
> - res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> - if (!res) {
> - dev_err(dev, "missing IRQ\n");
> - return -ENODEV;
> - }
> - dwc->xhci_resources[1].start = res->start;
> - dwc->xhci_resources[1].end = res->end;
> - dwc->xhci_resources[1].flags = res->flags;
> - dwc->xhci_resources[1].name = res->name;
> -
> - dwc->otg_irq = platform_get_irq_byname(pdev, "dwc3_otg");
> -
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> if (!res) {
> dev_err(dev, "missing memory resource\n");
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index 8e2e579b4b1e..0b02186fad6f 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -671,6 +671,8 @@ struct dwc3_scratchpad_array {
> * @maximum_speed: maximum speed requested (mainly for testing purposes)
> * @revision: revision register contents
> * @dr_mode: requested mode of operation
> + * @gadget_irq: IRQ number for Peripheral IRQs
> + * @xhci_irq: IRQ number for Host IRQs
> * @otg_irq: IRQ number for OTG IRQs
> * @usb2_phy: pointer to USB2 PHY
> * @usb3_phy: pointer to USB3 PHY
> @@ -747,6 +749,8 @@ struct dwc3 {
>
> enum usb_dr_mode dr_mode;
>
> + int gadget_irq;
> + int xhci_irq;
> int otg_irq;
>
> /* used for suspend/resume */
> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index a8cf87b3de01..2a6e5155fc89 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -1567,15 +1567,13 @@ static int dwc3_gadget_start(struct usb_gadget *g,
> struct dwc3_ep *dep;
> unsigned long flags;
> int ret = 0;
> - int irq;
> u32 reg;
>
> - irq = platform_get_irq(to_platform_device(dwc->dev), 0);
> - ret = request_threaded_irq(irq, dwc3_interrupt, dwc3_thread_interrupt,
> - IRQF_SHARED, "dwc3", dwc);
> + ret = request_threaded_irq(dwc->gadget_irq, dwc3_interrupt,
> + dwc3_thread_interrupt, IRQF_SHARED, "dwc3", dwc);
> if (ret) {
> dev_err(dwc->dev, "failed to request irq #%d --> %d\n",
> - irq, ret);
> + dwc->gadget_irq, ret);
> goto err0;
> }
>
> @@ -1668,7 +1666,7 @@ err2:
> err1:
> spin_unlock_irqrestore(&dwc->lock, flags);
>
> - free_irq(irq, dwc);
> + free_irq(dwc->gadget_irq, dwc);
>
> err0:
> return ret;
> @@ -1679,7 +1677,6 @@ static int dwc3_gadget_stop(struct usb_gadget *g,
> {
> struct dwc3 *dwc = gadget_to_dwc(g);
> unsigned long flags;
> - int irq;
>
> spin_lock_irqsave(&dwc->lock, flags);
>
> @@ -1691,8 +1688,7 @@ static int dwc3_gadget_stop(struct usb_gadget *g,
>
> spin_unlock_irqrestore(&dwc->lock, flags);
>
> - irq = platform_get_irq(to_platform_device(dwc->dev), 0);
> - free_irq(irq, dwc);
> + free_irq(dwc->gadget_irq, dwc);
>
> return 0;
> }
>
- --
cheers,
- -roger
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=M0TG
-----END PGP SIGNATURE-----
next prev parent reply other threads:[~2015-09-03 12:46 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-02 14:24 [PATCH v4 0/9] usb: dwc3: add dual-role support Roger Quadros
2015-09-02 14:24 ` Roger Quadros
2015-09-02 14:24 ` [PATCH v4 2/9] usb: dwc3: core.h: add some register definitions Roger Quadros
2015-09-02 14:24 ` Roger Quadros
2015-09-02 14:24 ` [PATCH v4 3/9] usb: dwc3: dwc3-omap: Make the wrapper interrupt shared Roger Quadros
2015-09-02 14:24 ` Roger Quadros
[not found] ` <1441203864-15786-4-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
2015-09-02 14:32 ` Felipe Balbi
2015-09-02 14:32 ` Felipe Balbi
2015-09-02 14:24 ` [PATCH v4 4/9] usb: dwc3: core: Adapt to named interrupts Roger Quadros
2015-09-02 14:24 ` Roger Quadros
2015-09-02 14:34 ` Felipe Balbi
2015-09-02 14:34 ` Felipe Balbi
[not found] ` <20150902143457.GF8299-HgARHv6XitJaoMGHk7MhZQC/G2K4zDHf@public.gmane.org>
2015-09-03 12:46 ` Roger Quadros [this message]
2015-09-03 12:46 ` Roger Quadros
2015-09-03 15:48 ` Felipe Balbi
2015-09-03 15:48 ` Felipe Balbi
2015-09-04 9:11 ` Roger Quadros
2015-09-04 9:11 ` Roger Quadros
[not found] ` <1441203864-15786-1-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
2015-09-02 14:24 ` [PATCH v4 1/9] usb: dwc3: add dual-role support Roger Quadros
2015-09-02 14:24 ` Roger Quadros
2015-09-02 14:31 ` Felipe Balbi
2015-09-02 14:31 ` Felipe Balbi
2015-09-03 12:21 ` Roger Quadros
2015-09-03 12:21 ` Roger Quadros
2015-09-03 15:44 ` Felipe Balbi
2015-09-03 15:44 ` Felipe Balbi
2015-09-04 9:06 ` Roger Quadros
2015-09-04 9:06 ` Roger Quadros
[not found] ` <55E95F14.20901-l0cyMroinI0@public.gmane.org>
2015-09-07 9:42 ` Roger Quadros
2015-09-07 9:42 ` Roger Quadros
[not found] ` <1441203864-15786-2-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
2015-09-06 2:02 ` Peter Chen
2015-09-06 2:02 ` Peter Chen
2015-09-07 9:39 ` Roger Quadros
2015-09-07 9:39 ` Roger Quadros
2015-09-02 14:24 ` [PATCH v4 5/9] usb: dwc3: core: make dual-role work with OTG irq Roger Quadros
2015-09-02 14:24 ` Roger Quadros
2015-09-02 14:43 ` Felipe Balbi
2015-09-02 14:43 ` Felipe Balbi
[not found] ` <20150902144338.GG8299-HgARHv6XitJaoMGHk7MhZQC/G2K4zDHf@public.gmane.org>
2015-09-03 13:52 ` Roger Quadros
2015-09-03 13:52 ` Roger Quadros
[not found] ` <55E85082.5040006-l0cyMroinI0@public.gmane.org>
2015-09-03 15:51 ` Felipe Balbi
2015-09-03 15:51 ` Felipe Balbi
2015-09-04 9:13 ` Roger Quadros
2015-09-04 9:13 ` Roger Quadros
2015-09-06 2:20 ` Peter Chen
2015-09-06 2:20 ` Peter Chen
2015-09-15 14:46 ` Roger Quadros
2015-09-15 14:46 ` Roger Quadros
2015-09-02 14:24 ` [PATCH v4 9/9] usb: dwc3: core: don't break during suspend/resume while we're dual-role Roger Quadros
2015-09-02 14:24 ` Roger Quadros
2015-09-02 14:48 ` Felipe Balbi
2015-09-02 14:48 ` Felipe Balbi
2015-09-03 14:02 ` Roger Quadros
2015-09-03 14:02 ` Roger Quadros
2015-09-02 17:22 ` Sergei Shtylyov
[not found] ` <55E7303D.8080904-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
2015-09-03 14:01 ` Roger Quadros
2015-09-03 14:01 ` Roger Quadros
[not found] ` <55E852BC.9000502-l0cyMroinI0@public.gmane.org>
2015-09-03 14:05 ` Sergei Shtylyov
2015-09-03 14:05 ` Sergei Shtylyov
2015-09-03 14:10 ` Roger Quadros
2015-09-03 14:10 ` Roger Quadros
2015-09-03 14:13 ` Sergei Shtylyov
2015-09-02 14:24 ` [PATCH v4 6/9] usb: dwc3: save/restore OTG registers during suspend/resume Roger Quadros
2015-09-02 14:24 ` Roger Quadros
2015-09-02 14:44 ` Felipe Balbi
2015-09-02 14:44 ` Felipe Balbi
2015-09-03 13:54 ` Roger Quadros
2015-09-03 13:54 ` Roger Quadros
2015-09-02 14:24 ` [PATCH v4 7/9] usb: dwc3: gadget: Fix suspend/resume during dual-role mode Roger Quadros
2015-09-02 14:24 ` Roger Quadros
2015-09-02 14:24 ` [PATCH v4 8/9] usb: dwc3: core: Prevent otg events from disabling themselves Roger Quadros
2015-09-02 14:24 ` Roger Quadros
2015-09-02 14:47 ` Felipe Balbi
2015-09-02 14:47 ` Felipe Balbi
2015-09-03 13:54 ` Roger Quadros
2015-09-03 13:54 ` Roger Quadros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55E84133.9070704@ti.com \
--to=rogerq-l0cymroini0@public.gmane.org \
--cc=Joao.Pinto-HKixBCOQz3hWk0Htik3J/w@public.gmane.org \
--cc=balbi-l0cyMroinI0@public.gmane.org \
--cc=jun.li-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
--cc=sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org \
--cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.