Re: [PATCH 2/4] devicetree: bindings: Add header file with evdev type and abs/rel code defines

[Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>]

On 09/09/2015 04:11 AM, Hans de Goede wrote:
> This header provides evdev constants for linux,code, and linux,input-*
> properties.
> 
> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> ---
>  include/dt-bindings/input/evdev.h | 76 +++++++++++++++++++++++++++++++++++++++

This looks fine, but please just add to input/input.h.

Rob

>  1 file changed, 76 insertions(+)
>  create mode 100644 include/dt-bindings/input/evdev.h
> 
> diff --git a/include/dt-bindings/input/evdev.h b/include/dt-bindings/input/evdev.h
> new file mode 100644
> index 0000000..c1f7e0d
> --- /dev/null
> +++ b/include/dt-bindings/input/evdev.h
> @@ -0,0 +1,76 @@
> +/*
> + * This header provides evdev constants for linux,code, and linux,input-*
> + * properties.
> + */
> +
> +#ifndef _DT_BINDINGS_INPUT_LINUX_H
> +#define _DT_BINDINGS_INPUT_LINUX_H
> +
> +/*
> + * Event types
> + */
> +
> +#define EV_SYN			0x00
> +#define EV_KEY			0x01
> +#define EV_REL			0x02
> +#define EV_ABS			0x03
> +#define EV_MSC			0x04
> +#define EV_SW			0x05
> +#define EV_LED			0x11
> +#define EV_SND			0x12
> +#define EV_REP			0x14
> +#define EV_FF			0x15
> +#define EV_PWR			0x16
> +#define EV_FF_STATUS		0x17
> +#define EV_MAX			0x1f
> +
> +/*
> + * Relative axes
> + */
> +
> +#define REL_X			0x00
> +#define REL_Y			0x01
> +#define REL_Z			0x02
> +#define REL_RX			0x03
> +#define REL_RY			0x04
> +#define REL_RZ			0x05
> +#define REL_HWHEEL		0x06
> +#define REL_DIAL		0x07
> +#define REL_WHEEL		0x08
> +#define REL_MISC		0x09
> +#define REL_MAX			0x0f
> +
> +/*
> + * Absolute axes
> + */
> +
> +#define ABS_X			0x00
> +#define ABS_Y			0x01
> +#define ABS_Z			0x02
> +#define ABS_RX			0x03
> +#define ABS_RY			0x04
> +#define ABS_RZ			0x05
> +#define ABS_THROTTLE		0x06
> +#define ABS_RUDDER		0x07
> +#define ABS_WHEEL		0x08
> +#define ABS_GAS			0x09
> +#define ABS_BRAKE		0x0a
> +#define ABS_HAT0X		0x10
> +#define ABS_HAT0Y		0x11
> +#define ABS_HAT1X		0x12
> +#define ABS_HAT1Y		0x13
> +#define ABS_HAT2X		0x14
> +#define ABS_HAT2Y		0x15
> +#define ABS_HAT3X		0x16
> +#define ABS_HAT3Y		0x17
> +#define ABS_PRESSURE		0x18
> +#define ABS_DISTANCE		0x19
> +#define ABS_TILT_X		0x1a
> +#define ABS_TILT_Y		0x1b
> +#define ABS_TOOL_WIDTH		0x1c
> +
> +#define ABS_VOLUME		0x20
> +
> +#define ABS_MISC		0x28
> +
> +#endif /* _DT_BINDINGS_INPUT_LINUX_H */
>