From: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
To: "Balbi, Felipe" <balbi-l0cyMroinI0@public.gmane.org>
Cc: "linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: usb: dwc3: gadget: warning on v4.3-rc1
Date: Mon, 21 Sep 2015 11:06:27 +0300 [thread overview]
Message-ID: <55FFBA83.7010003@ti.com> (raw)
Hi Felipe,
I see the following warning when g_zero is loaded
and USB cable is plugged to host on dra7-evm's USB1 port.
It happens only once and no longer appears on re-loading gadget
or plugging/unplugging cable.
root@rockdesk:~# modprobe g_zero
[ 28.414895] zero gadget: Gadget Zero, version: Cinco de Mayo 2008
[ 28.421284] zero gadget: zero ready
root@rockdesk:~# [ 35.298997] zero gadget: high-speed config #3: source/sink
[ 35.305079] ------------[ cut here ]------------
[ 35.309948] WARNING: CPU: 1 PID: 2269 at drivers/usb/dwc3/gadget.c:697 dwc3_gadget_ep_disable+0xa8/0xc8 [dwc3]()
[ 35.320613] dwc3 48890000.usb: ep1in is already disabled
[ 35.326174] Modules linked in: usb_f_ss_lb g_zero libcomposite xhci_plat_hcd xhci_hcd usbcore dwc3 m25p80 spi_nor udc_core usb_common c_can_platform c_can spi_ti_qspi can_dev cpufreq_dt omap_wdt extcon_usb_gx
[ 35.353787] CPU: 1 PID: 2269 Comm: irq/415-dwc3 Not tainted 4.3.0-rc2-00001-g895eac6 #289
[ 35.362349] Hardware name: Generic DRA74X (Flattened Device Tree)
[ 35.368749] [<c0016ed4>] (unwind_backtrace) from [<c00131d4>] (show_stack+0x10/0x14)
[ 35.376877] [<c00131d4>] (show_stack) from [<c033c94c>] (dump_stack+0x80/0x9c)
[ 35.384459] [<c033c94c>] (dump_stack) from [<c003e684>] (warn_slowpath_common+0x7c/0xb8)
[ 35.392952] [<c003e684>] (warn_slowpath_common) from [<c003e754>] (warn_slowpath_fmt+0x30/0x40)
[ 35.402088] [<c003e754>] (warn_slowpath_fmt) from [<bf098acc>] (dwc3_gadget_ep_disable+0xa8/0xc8 [dwc3])
[ 35.412080] [<bf098acc>] (dwc3_gadget_ep_disable [dwc3]) from [<bf149ac0>] (disable_ep+0x2c/0x6c [usb_f_ss_lb])
[ 35.422676] [<bf149ac0>] (disable_ep [usb_f_ss_lb]) from [<bf14a6b0>] (disable_endpoints+0x18/0x50 [usb_f_ss_lb])
[ 35.433445] [<bf14a6b0>] (disable_endpoints [usb_f_ss_lb]) from [<bf14a714>] (disable_source_sink+0x2c/0x34 [usb_f_ss_lb])
[ 35.445032] [<bf14a714>] (disable_source_sink [usb_f_ss_lb]) from [<bf14a74c>] (sourcesink_set_alt+0x2c/0x264 [usb_f_ss_lb])
[ 35.456810] [<bf14a74c>] (sourcesink_set_alt [usb_f_ss_lb]) from [<bf131730>] (composite_setup+0xc28/0x1574 [libcomposite])
[ 35.468500] [<bf131730>] (composite_setup [libcomposite]) from [<bf099ac0>] (dwc3_ep0_delegate_req+0x2c/0x40 [dwc3])
[ 35.479559] [<bf099ac0>] (dwc3_ep0_delegate_req [dwc3]) from [<bf09a840>] (dwc3_ep0_interrupt+0x984/0xc40 [dwc3])
[ 35.490353] [<bf09a840>] (dwc3_ep0_interrupt [dwc3]) from [<bf09821c>] (dwc3_thread_interrupt+0x7a8/0x9c8 [dwc3])
[ 35.501195] [<bf09821c>] (dwc3_thread_interrupt [dwc3]) from [<c009c5d8>] (irq_thread_fn+0x1c/0x34)
[ 35.510689] [<c009c5d8>] (irq_thread_fn) from [<c009c78c>] (irq_thread+0x148/0x1a4)
[ 35.518724] [<c009c78c>] (irq_thread) from [<c005de20>] (kthread+0xd0/0xec)
[ 35.526024] [<c005de20>] (kthread) from [<c000f870>] (ret_from_fork+0x14/0x24)
[ 35.533593] ---[ end trace fe01e35c4677ca2f ]---
cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2015-09-21 8:06 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-21 8:06 Roger Quadros [this message]
[not found] ` <55FFBA83.7010003-l0cyMroinI0@public.gmane.org>
2015-09-21 14:41 ` usb: dwc3: gadget: warning on v4.3-rc1 Felipe Balbi
[not found] ` <20150921144150.GB9144-HgARHv6XitJaoMGHk7MhZQC/G2K4zDHf@public.gmane.org>
2015-09-21 21:05 ` Felipe Balbi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55FFBA83.7010003@ti.com \
--to=rogerq-l0cymroini0@public.gmane.org \
--cc=balbi-l0cyMroinI0@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.