From: Lokesh Vutla <a0131933@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 6/6] am437x: Add am437x_sk_evm_defconfig using CONFIG_DM
Date: Mon, 28 Sep 2015 16:38:11 +0530 [thread overview]
Message-ID: <56091F9B.7010608@ti.com> (raw)
In-Reply-To: <1443437272-1939-7-git-send-email-mugunthanvnm@ti.com>
On Monday 28 September 2015 04:17 PM, Mugunthan V N wrote:
> Import various DT files for am437x-sk-evm from Linux Kernel v4.2
> Add config file for this board, enable DM, DM_GPIO, DM_SERIAL
> and DM_MMC.
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Thanks and regards,
Lokesh
>
> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
> ---
> arch/arm/dts/Makefile | 2 +-
> arch/arm/dts/am437x-sk-evm.dts | 704 ++++++++++++++++++++++++++++++++++++++++
> configs/am437x_sk_evm_defconfig | 17 +
> 3 files changed, 722 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/dts/am437x-sk-evm.dts
> create mode 100644 configs/am437x_sk_evm_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 716b5b7..29ef892 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -61,7 +61,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \
> zynq-zc770-xm012.dtb \
> zynq-zc770-xm013.dtb
> dtb-$(CONFIG_AM33XX) += am335x-boneblack.dtb am335x-evm.dtb
> -dtb-$(CONFIG_AM43XX) += am437x-gp-evm.dtb
> +dtb-$(CONFIG_AM43XX) += am437x-gp-evm.dtb am437x-sk-evm.dtb
>
> dtb-$(CONFIG_ARCH_SOCFPGA) += \
> socfpga_arria5_socdk.dtb \
> diff --git a/arch/arm/dts/am437x-sk-evm.dts b/arch/arm/dts/am437x-sk-evm.dts
> new file mode 100644
> index 0000000..3f9d808
> --- /dev/null
> +++ b/arch/arm/dts/am437x-sk-evm.dts
> @@ -0,0 +1,704 @@
> +/*
> + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +/* AM437x SK EVM */
> +
> +/dts-v1/;
> +
> +#include "am4372.dtsi"
> +#include <dt-bindings/pinctrl/am43xx.h>
> +#include <dt-bindings/pwm/pwm.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +
> +/ {
> + model = "TI AM437x SK EVM";
> + compatible = "ti,am437x-sk-evm","ti,am4372","ti,am43";
> +
> + aliases {
> + display0 = &lcd0;
> + };
> +
> + chosen {
> + stdout-path = &uart0;
> + };
> +
> + backlight {
> + compatible = "pwm-backlight";
> + pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
> + brightness-levels = <0 51 53 56 62 75 101 152 255>;
> + default-brightness-level = <8>;
> + };
> +
> + sound {
> + compatible = "ti,da830-evm-audio";
> + ti,model = "AM437x-SK-EVM";
> + ti,audio-codec = <&tlv320aic3106>;
> + ti,mcasp-controller = <&mcasp1>;
> + ti,codec-clock-rate = <24000000>;
> + ti,audio-routing =
> + "Headphone Jack", "HPLOUT",
> + "Headphone Jack", "HPROUT";
> + };
> +
> + matrix_keypad: matrix_keypad at 0 {
> + compatible = "gpio-matrix-keypad";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&matrix_keypad_pins>;
> +
> + debounce-delay-ms = <5>;
> + col-scan-delay-us = <5>;
> +
> + row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH /* Bank5, pin5 */
> + &gpio5 6 GPIO_ACTIVE_HIGH>; /* Bank5, pin6 */
> +
> + col-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH /* Bank5, pin13 */
> + &gpio5 4 GPIO_ACTIVE_HIGH>; /* Bank5, pin4 */
> +
> + linux,keymap = <
> + MATRIX_KEY(0, 0, KEY_DOWN)
> + MATRIX_KEY(0, 1, KEY_RIGHT)
> + MATRIX_KEY(1, 0, KEY_LEFT)
> + MATRIX_KEY(1, 1, KEY_UP)
> + >;
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&leds_pins>;
> +
> + led at 0 {
> + label = "am437x-sk:red:heartbeat";
> + gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 0 */
> + linux,default-trigger = "heartbeat";
> + default-state = "off";
> + };
> +
> + led at 1 {
> + label = "am437x-sk:green:mmc1";
> + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 1 */
> + linux,default-trigger = "mmc0";
> + default-state = "off";
> + };
> +
> + led at 2 {
> + label = "am437x-sk:blue:cpu0";
> + gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 2 */
> + linux,default-trigger = "cpu0";
> + default-state = "off";
> + };
> +
> + led at 3 {
> + label = "am437x-sk:blue:usr3";
> + gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 3 */
> + default-state = "off";
> + };
> + };
> +
> + lcd0: display {
> + compatible = "newhaven,nhd-4.3-480272ef-atxl", "panel-dpi";
> + label = "lcd";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&lcd_pins>;
> +
> + enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
> +
> + panel-timing {
> + clock-frequency = <9000000>;
> + hactive = <480>;
> + vactive = <272>;
> + hfront-porch = <2>;
> + hback-porch = <2>;
> + hsync-len = <41>;
> + vfront-porch = <2>;
> + vback-porch = <2>;
> + vsync-len = <10>;
> + hsync-active = <0>;
> + vsync-active = <0>;
> + de-active = <1>;
> + pixelclk-active = <1>;
> + };
> +
> + port {
> + lcd_in: endpoint {
> + remote-endpoint = <&dpi_out>;
> + };
> + };
> + };
> +};
> +
> +&am43xx_pinmux {
> + matrix_keypad_pins: matrix_keypad_pins {
> + pinctrl-single,pins = <
> + 0x24c (PIN_OUTPUT | MUX_MODE7) /* gpio5_13.gpio5_13 */
> + 0x250 (PIN_OUTPUT | MUX_MODE7) /* spi4_sclk.gpio5_4 */
> + 0x254 (PIN_INPUT | MUX_MODE7) /* spi4_d0.gpio5_5 */
> + 0x258 (PIN_INPUT | MUX_MODE7) /* spi4_d1.gpio5_5 */
> + >;
> + };
> +
> + leds_pins: leds_pins {
> + pinctrl-single,pins = <
> + 0x228 (PIN_OUTPUT | MUX_MODE7) /* uart3_rxd.gpio5_2 */
> + 0x22c (PIN_OUTPUT | MUX_MODE7) /* uart3_txd.gpio5_3 */
> + 0x230 (PIN_OUTPUT | MUX_MODE7) /* uart3_ctsn.gpio5_0 */
> + 0x234 (PIN_OUTPUT | MUX_MODE7) /* uart3_rtsn.gpio5_1 */
> + >;
> + };
> +
> + i2c0_pins: i2c0_pins {
> + pinctrl-single,pins = <
> + 0x188 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
> + 0x18c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
> + >;
> + };
> +
> + i2c1_pins: i2c1_pins {
> + pinctrl-single,pins = <
> + 0x15c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */
> + 0x158 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */
> + >;
> + };
> +
> + mmc1_pins: pinmux_mmc1_pins {
> + pinctrl-single,pins = <
> + 0x0f0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
> + 0x0f4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
> + 0x0f8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
> + 0x0fc (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
> + 0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
> + 0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
> + 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
> + >;
> + };
> +
> + ecap0_pins: backlight_pins {
> + pinctrl-single,pins = <
> + 0x164 (PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
> + >;
> + };
> +
> + edt_ft5306_ts_pins: edt_ft5306_ts_pins {
> + pinctrl-single,pins = <
> + 0x74 (PIN_INPUT | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
> + 0x78 (PIN_OUTPUT | MUX_MODE7) /* gpmc_be1n.gpio1_28 */
> + >;
> + };
> +
> + vpfe0_pins_default: vpfe0_pins_default {
> + pinctrl-single,pins = <
> + 0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/
> + 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/
> + 0x1b8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_field mode 0*/
> + 0x1bc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_wen mode 0*/
> + 0x1c0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/
> + 0x1c4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/
> + 0x1c8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/
> + 0x208 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/
> + 0x20c (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/
> + 0x210 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/
> + 0x214 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/
> + 0x218 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/
> + 0x21c (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/
> + 0x220 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/
> + 0x224 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/
> + >;
> + };
> +
> + vpfe0_pins_sleep: vpfe0_pins_sleep {
> + pinctrl-single,pins = <
> + 0x1b0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
> + 0x1b4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
> + 0x1b8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
> + 0x1bc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
> + 0x1c0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
> + 0x1c4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
> + 0x1c8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
> + 0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
> + 0x20c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
> + 0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
> + 0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
> + 0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
> + 0x21c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
> + 0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
> + 0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
> + >;
> + };
> +
> + cpsw_default: cpsw_default {
> + pinctrl-single,pins = <
> + /* Slave 1 */
> + 0x12c (PIN_OUTPUT | MUX_MODE2) /* mii1_txclk.rmii1_tclk */
> + 0x114 (PIN_OUTPUT | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
> + 0x128 (PIN_OUTPUT | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
> + 0x124 (PIN_OUTPUT | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
> + 0x120 (PIN_OUTPUT | MUX_MODE2) /* mii1_txd0.rgmii1_td2 */
> + 0x11c (PIN_OUTPUT | MUX_MODE2) /* mii1_txd1.rgmii1_td3 */
> + 0x130 (PIN_INPUT | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */
> + 0x118 (PIN_INPUT | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
> + 0x140 (PIN_INPUT | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
> + 0x13c (PIN_INPUT | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
> + 0x138 (PIN_INPUT | MUX_MODE2) /* mii1_rxd0.rgmii1_rd2 */
> + 0x134 (PIN_INPUT | MUX_MODE2) /* mii1_rxd1.rgmii1_rd3 */
> +
> + /* Slave 2 */
> + 0x58 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
> + 0x40 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
> + 0x54 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
> + 0x50 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
> + 0x4c (PIN_OUTPUT | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
> + 0x48 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
> + 0x5c (PIN_INPUT | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
> + 0x44 (PIN_INPUT | MUX_MODE2) /* gpmc_a1.rgmii2_rtcl */
> + 0x6c (PIN_INPUT | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
> + 0x68 (PIN_INPUT | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
> + 0x64 (PIN_INPUT | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
> + 0x60 (PIN_INPUT | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
> + >;
> + };
> +
> + cpsw_sleep: cpsw_sleep {
> + pinctrl-single,pins = <
> + /* Slave 1 reset value */
> + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
> + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
> + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
> + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +
> + /* Slave 2 reset value */
> + 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> + 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> + 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> + 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> + 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
> + 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> + 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
> + 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
> + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> + 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> + >;
> + };
> +
> + davinci_mdio_default: davinci_mdio_default {
> + pinctrl-single,pins = <
> + /* MDIO */
> + 0x148 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
> + 0x14c (PIN_OUTPUT | MUX_MODE0) /* mdio_clk.mdio_clk */
> + >;
> + };
> +
> + davinci_mdio_sleep: davinci_mdio_sleep {
> + pinctrl-single,pins = <
> + /* MDIO reset value */
> + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
> + >;
> + };
> +
> + dss_pins: dss_pins {
> + pinctrl-single,pins = <
> + 0x020 (PIN_OUTPUT | MUX_MODE1) /* gpmc ad 8 -> DSS DATA 23 */
> + 0x024 (PIN_OUTPUT | MUX_MODE1)
> + 0x028 (PIN_OUTPUT | MUX_MODE1)
> + 0x02c (PIN_OUTPUT | MUX_MODE1)
> + 0x030 (PIN_OUTPUT | MUX_MODE1)
> + 0x034 (PIN_OUTPUT | MUX_MODE1)
> + 0x038 (PIN_OUTPUT | MUX_MODE1)
> + 0x03c (PIN_OUTPUT | MUX_MODE1) /* gpmc ad 15 -> DSS DATA 16 */
> + 0x0a0 (PIN_OUTPUT | MUX_MODE0) /* DSS DATA 0 */
> + 0x0a4 (PIN_OUTPUT | MUX_MODE0)
> + 0x0a8 (PIN_OUTPUT | MUX_MODE0)
> + 0x0ac (PIN_OUTPUT | MUX_MODE0)
> + 0x0b0 (PIN_OUTPUT | MUX_MODE0)
> + 0x0b4 (PIN_OUTPUT | MUX_MODE0)
> + 0x0b8 (PIN_OUTPUT | MUX_MODE0)
> + 0x0bc (PIN_OUTPUT | MUX_MODE0)
> + 0x0c0 (PIN_OUTPUT | MUX_MODE0)
> + 0x0c4 (PIN_OUTPUT | MUX_MODE0)
> + 0x0c8 (PIN_OUTPUT | MUX_MODE0)
> + 0x0cc (PIN_OUTPUT | MUX_MODE0)
> + 0x0d0 (PIN_OUTPUT | MUX_MODE0)
> + 0x0d4 (PIN_OUTPUT | MUX_MODE0)
> + 0x0d8 (PIN_OUTPUT | MUX_MODE0)
> + 0x0dc (PIN_OUTPUT | MUX_MODE0) /* DSS DATA 15 */
> + 0x0e0 (PIN_OUTPUT | MUX_MODE0) /* DSS VSYNC */
> + 0x0e4 (PIN_OUTPUT | MUX_MODE0) /* DSS HSYNC */
> + 0x0e8 (PIN_OUTPUT | MUX_MODE0) /* DSS PCLK */
> + 0x0ec (PIN_OUTPUT | MUX_MODE0) /* DSS AC BIAS EN */
> +
> + >;
> + };
> +
> + qspi_pins: qspi_pins {
> + pinctrl-single,pins = <
> + 0x7c (PIN_OUTPUT | MUX_MODE3) /* gpmc_csn0.qspi_csn */
> + 0x88 (PIN_OUTPUT | MUX_MODE2) /* gpmc_csn3.qspi_clk */
> + 0x90 (PIN_INPUT | MUX_MODE3) /* gpmc_advn_ale.qspi_d0 */
> + 0x94 (PIN_INPUT | MUX_MODE3) /* gpmc_oen_ren.qspi_d1 */
> + 0x98 (PIN_INPUT | MUX_MODE3) /* gpmc_wen.qspi_d2 */
> + 0x9c (PIN_INPUT | MUX_MODE3) /* gpmc_be0n_cle.qspi_d3 */
> + >;
> + };
> +
> + mcasp1_pins: mcasp1_pins {
> + pinctrl-single,pins = <
> + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
> + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
> + 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
> + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
> + >;
> + };
> +
> + lcd_pins: lcd_pins {
> + pinctrl-single,pins = <
> + 0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */
> + >;
> + };
> +
> + usb1_pins: usb1_pins {
> + pinctrl-single,pins = <
> + 0x2c0 (PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
> + >;
> + };
> +
> + usb2_pins: usb2_pins {
> + pinctrl-single,pins = <
> + 0x2c4 (PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
> + >;
> + };
> +};
> +
> +&i2c0 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c0_pins>;
> + clock-frequency = <400000>;
> +
> + tps at 24 {
> + compatible = "ti,tps65218";
> + reg = <0x24>;
> + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + dcdc1: regulator-dcdc1 {
> + compatible = "ti,tps65218-dcdc1";
> + /* VDD_CORE limits min of OPP50 and max of OPP100 */
> + regulator-name = "vdd_core";
> + regulator-min-microvolt = <912000>;
> + regulator-max-microvolt = <1144000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + dcdc2: regulator-dcdc2 {
> + compatible = "ti,tps65218-dcdc2";
> + /* VDD_MPU limits min of OPP50 and max of OPP_NITRO */
> + regulator-name = "vdd_mpu";
> + regulator-min-microvolt = <912000>;
> + regulator-max-microvolt = <1378000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + dcdc3: regulator-dcdc3 {
> + compatible = "ti,tps65218-dcdc3";
> + regulator-name = "vdds_ddr";
> + regulator-min-microvolt = <1500000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + dcdc4: regulator-dcdc4 {
> + compatible = "ti,tps65218-dcdc4";
> + regulator-name = "v3_3d";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + ldo1: regulator-ldo1 {
> + compatible = "ti,tps65218-ldo1";
> + regulator-name = "v1_8d";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + power-button {
> + compatible = "ti,tps65218-pwrbutton";
> + status = "okay";
> + interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
> + };
> + };
> +
> + at24 at 50 {
> + compatible = "at24,24c256";
> + pagesize = <64>;
> + reg = <0x50>;
> + };
> +};
> +
> +&i2c1 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c1_pins>;
> + clock-frequency = <400000>;
> +
> + edt-ft5306 at 38 {
> + status = "okay";
> + compatible = "edt,edt-ft5306", "edt,edt-ft5x06";
> + pinctrl-names = "default";
> + pinctrl-0 = <&edt_ft5306_ts_pins>;
> +
> + reg = <0x38>;
> + interrupt-parent = <&gpio0>;
> + interrupts = <31 0>;
> +
> + reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
> +
> + touchscreen-size-x = <480>;
> + touchscreen-size-y = <272>;
> + };
> +
> + tlv320aic3106: tlv320aic3106 at 1b {
> + compatible = "ti,tlv320aic3106";
> + reg = <0x1b>;
> + status = "okay";
> +
> + /* Regulators */
> + AVDD-supply = <&dcdc4>;
> + IOVDD-supply = <&dcdc4>;
> + DRVDD-supply = <&dcdc4>;
> + DVDD-supply = <&ldo1>;
> + };
> +
> + lis331dlh at 18 {
> + compatible = "st,lis331dlh";
> + reg = <0x18>;
> + status = "okay";
> +
> + Vdd-supply = <&dcdc4>;
> + Vdd_IO-supply = <&dcdc4>;
> + interrupts-extended = <&gpio1 6 0>, <&gpio2 1 0>;
> + };
> +};
> +
> +&epwmss0 {
> + status = "okay";
> +};
> +
> +&ecap0 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&ecap0_pins>;
> +};
> +
> +&gpio0 {
> + status = "okay";
> +};
> +
> +&gpio1 {
> + status = "okay";
> +};
> +
> +&gpio5 {
> + status = "okay";
> +};
> +
> +&mmc1 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&mmc1_pins>;
> +
> + vmmc-supply = <&dcdc4>;
> + bus-width = <4>;
> + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
> +};
> +
> +&usb2_phy1 {
> + status = "okay";
> +};
> +
> +&usb1 {
> + dr_mode = "peripheral";
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&usb1_pins>;
> +};
> +
> +&usb2_phy2 {
> + status = "okay";
> +};
> +
> +&usb2 {
> + dr_mode = "host";
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&usb2_pins>;
> +};
> +
> +&qspi {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&qspi_pins>;
> +
> + spi-max-frequency = <48000000>;
> + m25p80 at 0 {
> + compatible = "mx66l51235l";
> + spi-max-frequency = <48000000>;
> + reg = <0>;
> + spi-cpol;
> + spi-cpha;
> + spi-tx-bus-width = <1>;
> + spi-rx-bus-width = <4>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + /* MTD partition table.
> + * The ROM checks the first 512KiB
> + * for a valid file to boot(XIP).
> + */
> + partition at 0 {
> + label = "QSPI.U_BOOT";
> + reg = <0x00000000 0x000080000>;
> + };
> + partition at 1 {
> + label = "QSPI.U_BOOT.backup";
> + reg = <0x00080000 0x00080000>;
> + };
> + partition at 2 {
> + label = "QSPI.U-BOOT-SPL_OS";
> + reg = <0x00100000 0x00010000>;
> + };
> + partition at 3 {
> + label = "QSPI.U_BOOT_ENV";
> + reg = <0x00110000 0x00010000>;
> + };
> + partition at 4 {
> + label = "QSPI.U-BOOT-ENV.backup";
> + reg = <0x00120000 0x00010000>;
> + };
> + partition at 5 {
> + label = "QSPI.KERNEL";
> + reg = <0x00130000 0x0800000>;
> + };
> + partition at 6 {
> + label = "QSPI.FILESYSTEM";
> + reg = <0x00930000 0x36D0000>;
> + };
> + };
> +};
> +
> +&mac {
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&cpsw_default>;
> + pinctrl-1 = <&cpsw_sleep>;
> + dual_emac = <1>;
> + status = "okay";
> +};
> +
> +&davinci_mdio {
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&davinci_mdio_default>;
> + pinctrl-1 = <&davinci_mdio_sleep>;
> + status = "okay";
> +};
> +
> +&cpsw_emac0 {
> + phy_id = <&davinci_mdio>, <4>;
> + phy-mode = "rgmii";
> + dual_emac_res_vlan = <1>;
> +};
> +
> +&cpsw_emac1 {
> + phy_id = <&davinci_mdio>, <5>;
> + phy-mode = "rgmii";
> + dual_emac_res_vlan = <2>;
> +};
> +
> +&elm {
> + status = "okay";
> +};
> +
> +&mcasp1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&mcasp1_pins>;
> +
> + status = "okay";
> +
> + op-mode = <0>;
> + tdm-slots = <2>;
> + serial-dir = <
> + 0 0 1 2
> + >;
> +
> + tx-num-evt = <1>;
> + rx-num-evt = <1>;
> +};
> +
> +&dss {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&dss_pins>;
> +
> + port {
> + dpi_out: endpoint at 0 {
> + remote-endpoint = <&lcd_in>;
> + data-lines = <24>;
> + };
> + };
> +};
> +
> +&rtc {
> + status = "okay";
> +};
> +
> +&wdt {
> + status = "okay";
> +};
> +
> +&cpu {
> + cpu0-supply = <&dcdc2>;
> +};
> +
> +&vpfe0 {
> + status = "okay";
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&vpfe0_pins_default>;
> + pinctrl-1 = <&vpfe0_pins_sleep>;
> +
> + /* Camera port */
> + port {
> + vpfe0_ep: endpoint {
> + /* remote-endpoint = <&sensor>; add once we have it */
> + ti,am437x-vpfe-interface = <0>;
> + bus-width = <8>;
> + hsync-active = <0>;
> + vsync-active = <0>;
> + };
> + };
> +};
> diff --git a/configs/am437x_sk_evm_defconfig b/configs/am437x_sk_evm_defconfig
> new file mode 100644
> index 0000000..02485f8
> --- /dev/null
> +++ b/configs/am437x_sk_evm_defconfig
> @@ -0,0 +1,17 @@
> +CONFIG_ARM=y
> +CONFIG_TARGET_AM43XX_EVM=y
> +CONFIG_DEFAULT_DEVICE_TREE="am437x-sk-evm"
> +CONFIG_SPL=y
> +CONFIG_SPL_STACK_R=y
> +CONFIG_SPL_STACK_R_ADDR=0x82000000
> +CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1"
> +# CONFIG_CMD_IMLS is not set
> +# CONFIG_CMD_FLASH is not set
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_OF_CONTROL=y
> +CONFIG_SPL_DISABLE_OF_CONTROL=y
> +CONFIG_DM=y
> +CONFIG_SPI_FLASH=y
> +CONFIG_DM_GPIO=y
> +CONFIG_DM_SERIAL=y
> +CONFIG_DM_MMC=y
>
next prev parent reply other threads:[~2015-09-28 11:08 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-28 10:47 [U-Boot] [PATCH 0/6] device model bringup of am437x platform on gp-evm and sk-evm Mugunthan V N
2015-09-28 10:47 ` [U-Boot] [PATCH 1/6] drivers: serial: serial_omap: populate default clock frequency when not found in dt Mugunthan V N
2015-09-28 10:51 ` Lokesh Vutla
2015-10-22 21:23 ` [U-Boot] [U-Boot, " Tom Rini
2015-09-28 10:47 ` [U-Boot] [PATCH 2/6] drivers: serial: serial_omap: add comaptibles for all ti platforms Mugunthan V N
2015-09-28 10:52 ` Lokesh Vutla
2015-10-22 21:23 ` [U-Boot] [U-Boot, " Tom Rini
2015-09-28 10:47 ` [U-Boot] [PATCH 3/6] am43xx_evm.h: : switch to CONFIG_OMAP_SERIAL for non-SPL DM_SERIAL Mugunthan V N
2015-09-28 10:55 ` Lokesh Vutla
2015-09-28 11:07 ` Mugunthan V N
2015-10-22 21:23 ` [U-Boot] [U-Boot, " Tom Rini
2015-09-28 10:47 ` [U-Boot] [PATCH 4/6] am43xx_evm: mmc: do not define DM_MMC for spl Mugunthan V N
2015-10-22 21:23 ` [U-Boot] [U-Boot, " Tom Rini
2015-09-28 10:47 ` [U-Boot] [PATCH 5/6] am437x: Add am437x_gp_evm_defconfig using CONFIG_DM Mugunthan V N
2015-09-28 11:08 ` Lokesh Vutla
2015-10-22 21:23 ` [U-Boot] [U-Boot, " Tom Rini
2015-09-28 10:47 ` [U-Boot] [PATCH 6/6] am437x: Add am437x_sk_evm_defconfig " Mugunthan V N
2015-09-28 11:08 ` Lokesh Vutla [this message]
2015-10-22 21:23 ` [U-Boot] [U-Boot, " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56091F9B.7010608@ti.com \
--to=a0131933@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.