From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S934328AbbI1QE3 (ORCPT ); Mon, 28 Sep 2015 12:04:29 -0400 Received: from mail-gw3-out.broadcom.com ([216.31.210.64]:19904 "EHLO mail-gw3-out.broadcom.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S934035AbbI1QE1 (ORCPT ); Mon, 28 Sep 2015 12:04:27 -0400 X-IronPort-AV: E=Sophos;i="5.17,603,1437462000"; d="scan'208";a="76012544" Subject: Re: [PATCH v5 0/2] Add Cygnus PCIe Serdes/PHY support To: Kishon Vijay Abraham I References: <1442855838-23042-1-git-send-email-rjui@broadcom.com> CC: Arnd Bergmann , , "JD (Jiandong) Zheng" , Arun Parameswaran , From: Ray Jui Message-ID: <560964E8.8040507@broadcom.com> Date: Mon, 28 Sep 2015 09:03:52 -0700 User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:38.0) Gecko/20100101 Thunderbird/38.2.0 MIME-Version: 1.0 In-Reply-To: <1442855838-23042-1-git-send-email-rjui@broadcom.com> Content-Type: text/plain; charset="windows-1252" Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Kishon, Is there any more change that you want me to make with this patch series? Thanks, Ray On 9/21/2015 10:17 AM, Ray Jui wrote: > This patch series adds support for the Cygnus PCIe PHY > > This patch series is based on Linux v4.3-rc1 and is avaliable in: > https://github.com/Broadcom/cygnus-linux/tree/cygnus-pcie-phy-v5 > > Changes from v4: > - Add comment to explain the required 50 ms wait after PCIe AFE is brought > up > - Change some of 'dev_info' print to 'dev_dbg' > > Changes from v3: > - Modify the driver to use child node to represent each PCIe PHY > - Update device tree binding document and examples accordingly > - Add owner filed in phy ops > > Changes from v2: > - Dropped MDC/MDIO bus driver since it's not needed to enable/disable the > analog-front-end of the PCIe Serdes on Cygnus > - Optimized delay waiting for PCIe analog-front-end to be fully enabled > - Reduce the #phy-cell to 1 since now the MDIO PHY ID is not required > > Changes from v1: > - Move the MDC/MDIO bus driver from drivers/phy/* to drivers/bus/* > - Make the PCIe PHY device node child node of the MDIO bus > - Change the PCIe PHY driver to tristate so it can be compiled as a module > - Other minor changes > > Ray Jui (2): > dt-bindings: Add Cygnus PCIe PHY binding doc > phy: cygnus: pcie: Add Cygnus PCIe PHY support > > .../bindings/phy/brcm,cygnus-pcie-phy.txt | 47 +++++ > drivers/phy/Kconfig | 9 + > drivers/phy/Makefile | 1 + > drivers/phy/phy-bcm-cygnus-pcie.c | 213 +++++++++++++++++++++ > 4 files changed, 270 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt > create mode 100644 drivers/phy/phy-bcm-cygnus-pcie.c >