From: Frank de Jong <frapex@xs4all.nl>
To: linux-pci@vger.kernel.org
Subject: missing PCI ID refs
Date: Sun, 4 Oct 2015 21:37:34 +0200 [thread overview]
Message-ID: <56117FFE.6020304@xs4all.nl> (raw)
Hi,
Somewhere between kernel v3.15 and v3.18 several PCI ID refs went missing.
By accident, I presume. Kernel v3.14 is fine.
This might just be the tip of iceberg, so to speak, as more PCI ID refs
are probably missing.
In v3.14:
- "0000:03:00.0" was shown as "pata_pdc2027x" (PCI ID: 105a:4d68)
- "0000:00:1f.2" was shown as "ahci" (PCI ID: 8086:1c02)
- "0000:06:00.0" was shown as "ahci" (PCI ID: 1b21:0612)
# snippet from /proc/interrupts
CPU0 CPU1
0: 15 0 IO-APIC-edge timer
1: 31 0 IO-APIC-edge i8042
4: 39043 0 IO-APIC-edge serial
5: 1 0 IO-APIC-edge parport0
8: 111 0 IO-APIC-edge rtc0
9: 3 0 IO-APIC-fasteoi acpi
12: 144 0 IO-APIC-edge i8042
16: 99 0 IO-APIC 16-fasteoi ehci_hcd:usb1
18: 5173 0 IO-APIC 18-fasteoi 0000:03:00.0
19: 2871417 0 IO-APIC 19-fasteoi eth0
23: 33 0 IO-APIC 23-fasteoi ehci_hcd:usb4
24: 759 0 PCI-MSI-edge 0000:00:1f.2
25: 16582 0 PCI-MSI-edge 0000:06:00.0
26: 29172 0 PCI-MSI-edge eth1
27: 502 0 PCI-MSI-edge snd_hda_intel
28: 0 0 PCI-MSI-edge xhci_hcd
29: 0 0 PCI-MSI-edge xhci_hcd
30: 0 0 PCI-MSI-edge xhci_hcd
31: 17 0 PCI-MSI-edge i915
# snippet from lspci
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset
Family SATA AHCI Controller (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Micro-Star International Co., Ltd. Device 7732
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 24
I/O ports at f0b0 [size=8]
I/O ports at f0a0 [size=4]
I/O ports at f090 [size=8]
I/O ports at f080 [size=4]
I/O ports at f060 [size=32]
Memory at f7f05000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [70] Power Management version 3
Capabilities: [a8] SATA HBA v1.0
Capabilities: [b0] PCI Advanced Features
Kernel driver in use: ahci
03:00.0 Mass storage controller: Promise Technology, Inc. PDC20268
[Ultra100 TX2] (rev 02) (prog-if 85)
Subsystem: Promise Technology, Inc. Ultra100 TX2
Flags: bus master, 66MHz, slow devsel, latency 64, IRQ 18
I/O ports at e0c0 [size=8]
I/O ports at e0b0 [size=4]
I/O ports at e0a0 [size=8]
I/O ports at e090 [size=4]
I/O ports at e080 [size=16]
Memory at f7e24000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at f7e20000 [disabled] [size=16K]
Capabilities: [60] Power Management version 1
Kernel driver in use: pata_pdc2027x
06:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA
Controller (rev 01) (prog-if 01 [AHCI 1.0])
Subsystem: Micro-Star International Co., Ltd. Device 7732
Flags: bus master, fast devsel, latency 0, IRQ 25
I/O ports at c050 [size=8]
I/O ports at c040 [size=4]
I/O ports at c030 [size=8]
I/O ports at c020 [size=4]
I/O ports at c000 [size=32]
Memory at f7c00000 (32-bit, non-prefetchable) [size=512]
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [78] Power Management version 3
Capabilities: [80] Express Legacy Endpoint, MSI 00
Capabilities: [100] Virtual Channel
Kernel driver in use: ahci
Kind regards,
Frank de Jong
next reply other threads:[~2015-10-04 19:37 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-04 19:37 Frank de Jong [this message]
2015-10-05 17:52 ` missing PCI ID refs Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56117FFE.6020304@xs4all.nl \
--to=frapex@xs4all.nl \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.