Improved fxload [Was: Re: fxload devpath]

["Wojciech A. Koszek" <wojciech@koszek.com>]

Hello,

In May 2010 I've fixed fxload by adding LibUSB support.

After seeing Carl's e-mail I dug out a patches from backup, and made a 
repo out of it:

https://github.com/wkoszek/fxload

So basically fxload would gain LibUSB support and much easier usage, 
since the paths which fxload requires right now change for some devices 
doing re-enumeration.

Back then I failed to get any replies. Retrying now in hope we could get 
these fixes into mainline.

Thanks,

Wojciech

On 10/11/15 8:23 PM, Andrei Borzenkov wrote:
> 12.10.2015 01:29, Carl Karsten пишет:
>> man fxload - Firmware download to EZ-USB devices
>>
>> fxload  [  -v  ]  [ -l ] [ -D devpath ] ...
>>
>>         -D devpath
>>                Specifies the "usbfs" path name for the device in 
>> question, such
>>                as /proc/bus/usb/004/080.  This takes precedence over 
>> any DEVICE
>>                environment variable that may be set.
>>
>> How do I figure out what the devpath is for the device I plugged in?
>>
>> or.. how do I know what devnum will get assigned?
>>
>> The device(s) I am working with:
>>
>> juser@dc10b:~$ lsusb -s 2:9; lsusb -s 2:10
>> Bus 002 Device 009: ID 04e2:1410 Exar Corp.
>> Bus 002 Device 010: ID 1443:0007 Digilent Development board JTAG
>>
>
> Should be /dev/bus/usb/002/010 etc.
>
>> Ubuntu trusty lts
>> Linux dc10b 3.13.0-65-generic #106-Ubuntu SMP Fri Oct 2 22:08:27 UTC
>> 2015 x86_64 x86_64 x86_64 GNU/Linux
>>
>> -- 
>> Carl K
>> -- 
>> To unsubscribe from this list: send the line "unsubscribe 
>> linux-hotplug" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>
> -- 
> To unsubscribe from this list: send the line "unsubscribe 
> linux-hotplug" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html