From: Steffen Bauch <mail@steffenbauch.de>
To: Yuanhan Liu <yuanhan.liu@linux.intel.com>,
Nikita Kalyazin <n.kalyazin@samsung.com>
Cc: dev@dpdk.org
Subject: Re: [PATCH v5 resend 07/12] virtio: resolve for control queue
Date: Mon, 12 Oct 2015 22:58:17 +0200 [thread overview]
Message-ID: <561C1EE9.4040001@steffenbauch.de> (raw)
In-Reply-To: <20151012083956.GF3115@yliu-dev.sh.intel.com>
On 10/12/2015 10:39 AM, Yuanhan Liu wrote:
> Hi,
>
> I just recognized that this dead loop is the same one that I have
> experienced (see
> http://dpdk.org/ml/archives/dev/2015-October/024737.html for
> reference). Just applying the changes in this patch (only 07/12)
> will not fix the dead loop at least in my setup.
> Try to enable CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_INIT, and dump more log?
I enabled the additional debug output. First try was without any
additional changes in master, but it blocked also. Second try was with
[dpdk-dev] [PATCH v6 06/13] virtio: read virtio_net_config correctly
applied, but same result.
If you want to recreate my setup, just follow instructions in
http://dpdk.org/ml/archives/dev/2015-October/024737.html
vagrant@vagrant-ubuntu-vivid-64:~/dpdk$ git status
On branch master
Your branch is up-to-date with 'origin/master'.
Changes not staged for commit:
(use "git add <file>..." to update what will be committed)
(use "git checkout -- <file>..." to discard changes in working directory)
modified: config/defconfig_x86_64-native-linuxapp-gcc
..
vagrant@vagrant-ubuntu-vivid-64:~/dpdk/x86_64-native-linuxapp-gcc/app$
sudo ./testpmd -b 0000:00:03.0 -c 3 -n 1 -- -i
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 2 lcore(s)
EAL: VFIO modules not all loaded, skip VFIO support...
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x400000 bytes
EAL: Virtual area found at 0x7f2a3a800000 (size = 0x400000)
EAL: Ask a virtual area of 0xe000000 bytes
EAL: Virtual area found at 0x7f2a2c600000 (size = 0xe000000)
EAL: Ask a virtual area of 0x30c00000 bytes
EAL: Virtual area found at 0x7f29fb800000 (size = 0x30c00000)
EAL: Ask a virtual area of 0x400000 bytes
EAL: Virtual area found at 0x7f29fb200000 (size = 0x400000)
EAL: Ask a virtual area of 0xa00000 bytes
EAL: Virtual area found at 0x7f29fa600000 (size = 0xa00000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f29fa200000 (size = 0x200000)
EAL: Requesting 512 pages of size 2MB from socket 0
EAL: TSC frequency is ~2198491 KHz
EAL: WARNING: cpu flags constant_tsc=yes nonstop_tsc=no -> using
unreliable clock cycles !
EAL: Master lcore 0 is ready (tid=3c9938c0;cpuset=[0])
EAL: lcore 1 is ready (tid=fa1ff700;cpuset=[1])
EAL: PCI device 0000:00:03.0 on NUMA socket -1
EAL: probe driver: 1af4:1000 rte_virtio_pmd
EAL: Device is blacklisted, not initializing
EAL: PCI device 0000:00:08.0 on NUMA socket -1
EAL: probe driver: 1af4:1000 rte_virtio_pmd
PMD: parse_sysfs_value(): parse_sysfs_value(): cannot open sysfs value
/sys/bus/pci/devices/0000:00:08.0/uio/uio0/portio/port0/size
PMD: virtio_resource_init_by_uio(): virtio_resource_init_by_uio():
cannot parse size
PMD: virtio_resource_init_by_ioports(): PCI Port IO found start=0xd040
with size=0x20
PMD: virtio_negotiate_features(): guest_features before negotiate = cf8020
PMD: virtio_negotiate_features(): host_features before negotiate = 410fdda3
PMD: virtio_negotiate_features(): features after negotiate = f8020
PMD: eth_virtio_dev_init(): PORT MAC: 08:00:27:CC:DE:CD
PMD: eth_virtio_dev_init(): VIRTIO_NET_F_MQ is not supported
PMD: virtio_dev_cq_queue_setup(): >>
PMD: virtio_dev_queue_setup(): selecting queue: 2
PMD: virtio_dev_queue_setup(): vq_size: 16 nb_desc:0
PMD: virtio_dev_queue_setup(): vring_size: 4228, rounded_vring_size: 8192
PMD: virtio_dev_queue_setup(): vq->vq_ring_mem: 0x67b54000
PMD: virtio_dev_queue_setup(): vq->vq_ring_virt_mem: 0x7f29fb354000
PMD: eth_virtio_dev_init(): config->max_virtqueue_pairs=1
PMD: eth_virtio_dev_init(): config->status=1
PMD: eth_virtio_dev_init(): PORT MAC: 08:00:27:CC:DE:CD
PMD: eth_virtio_dev_init(): hw->max_rx_queues=1 hw->max_tx_queues=1
PMD: eth_virtio_dev_init(): port 0 vendorID=0x1af4 deviceID=0x1000
PMD: virtio_dev_vring_start(): >>
EAL: PCI device 0000:00:09.0 on NUMA socket -1
EAL: probe driver: 1af4:1000 rte_virtio_pmd
PMD: parse_sysfs_value(): parse_sysfs_value(): cannot open sysfs value
/sys/bus/pci/devices/0000:00:09.0/uio/uio1/portio/port0/size
PMD: virtio_resource_init_by_uio(): virtio_resource_init_by_uio():
cannot parse size
PMD: virtio_resource_init_by_ioports(): PCI Port IO found start=0xd060
with size=0x20
PMD: virtio_negotiate_features(): guest_features before negotiate = cf8020
PMD: virtio_negotiate_features(): host_features before negotiate = 410fdda3
PMD: virtio_negotiate_features(): features after negotiate = f8020
PMD: eth_virtio_dev_init(): PORT MAC: 08:00:27:07:D3:F5
PMD: eth_virtio_dev_init(): VIRTIO_NET_F_MQ is not supported
PMD: virtio_dev_cq_queue_setup(): >>
PMD: virtio_dev_queue_setup(): selecting queue: 2
PMD: virtio_dev_queue_setup(): vq_size: 16 nb_desc:0
PMD: virtio_dev_queue_setup(): vring_size: 4228, rounded_vring_size: 8192
PMD: virtio_dev_queue_setup(): vq->vq_ring_mem: 0x67b50000
PMD: virtio_dev_queue_setup(): vq->vq_ring_virt_mem: 0x7f29fb350000
PMD: eth_virtio_dev_init(): config->max_virtqueue_pairs=1
PMD: eth_virtio_dev_init(): config->status=1
PMD: eth_virtio_dev_init(): PORT MAC: 08:00:27:07:D3:F5
PMD: eth_virtio_dev_init(): hw->max_rx_queues=1 hw->max_tx_queues=1
PMD: eth_virtio_dev_init(): port 1 vendorID=0x1af4 deviceID=0x1000
PMD: virtio_dev_vring_start(): >>
Interactive-mode selected
Configuring Port 0 (socket 0)
PMD: virtio_dev_configure(): configure
PMD: virtio_dev_tx_queue_setup(): >>
PMD: virtio_dev_queue_setup(): selecting queue: 1
PMD: virtio_dev_queue_setup(): vq_size: 256 nb_desc:512
PMD: virtio_dev_queue_setup(): vring_size: 10244, rounded_vring_size: 12288
PMD: virtio_dev_queue_setup(): vq->vq_ring_mem: 0x5fb000
PMD: virtio_dev_queue_setup(): vq->vq_ring_virt_mem: 0x7f2a3a9fb000
PMD: virtio_dev_rx_queue_setup(): >>
PMD: virtio_dev_queue_setup(): selecting queue: 0
PMD: virtio_dev_queue_setup(): vq_size: 256 nb_desc:128
PMD: virtio_dev_queue_setup(): vring_size: 10244, rounded_vring_size: 12288
PMD: virtio_dev_queue_setup(): vq->vq_ring_mem: 0x5f6000
PMD: virtio_dev_queue_setup(): vq->vq_ring_virt_mem: 0x7f2a3a9f6000
PMD: virtio_dev_link_update(): Get link status from hw
PMD: virtio_dev_link_update(): Port 0 is up
PMD: virtio_dev_rxtx_start(): >>
PMD: virtio_dev_vring_start(): >>
PMD: virtio_dev_vring_start(): Allocated 256 bufs
PMD: virtio_dev_vring_start(): >>
PMD: virtio_dev_start(): nb_queues=1
PMD: virtio_dev_start(): Notified backend at initialization
PMD: virtio_send_command(): vq->vq_desc_head_idx = 0, status = 255,
vq->hw->cvq = 0x7f29fb3567c0 vq = 0x7f29fb3567c0
PMD: virtio_send_command(): vq->vq_queue_index = 2
[ ... blocking]
Results after patch was applied:
vagrant@vagrant-ubuntu-vivid-64:~/dpdk/x86_64-native-linuxapp-gcc/app$
sudo ./testpmd -b 0000:00:03.0 -c 3 -n 1 -- -iEAL: Detected lcore 0 as
core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 2 lcore(s)
EAL: VFIO modules not all loaded, skip VFIO support...
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x400000 bytes
EAL: Virtual area found at 0x7f2c8e000000 (size = 0x400000)
EAL: Ask a virtual area of 0xe000000 bytes
EAL: Virtual area found at 0x7f2c7fe00000 (size = 0xe000000)
EAL: Ask a virtual area of 0x30c00000 bytes
EAL: Virtual area found at 0x7f2c4f000000 (size = 0x30c00000)
EAL: Ask a virtual area of 0x400000 bytes
EAL: Virtual area found at 0x7f2c4ea00000 (size = 0x400000)
EAL: Ask a virtual area of 0xa00000 bytes
EAL: Virtual area found at 0x7f2c4de00000 (size = 0xa00000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2c4da00000 (size = 0x200000)
EAL: Requesting 512 pages of size 2MB from socket 0
EAL: TSC frequency is ~2198491 KHz
EAL: WARNING: cpu flags constant_tsc=yes nonstop_tsc=no -> using
unreliable clock cycles !
EAL: Master lcore 0 is ready (tid=904928c0;cpuset=[0])
EAL: lcore 1 is ready (tid=4d9ff700;cpuset=[1])
EAL: PCI device 0000:00:03.0 on NUMA socket -1
EAL: probe driver: 1af4:1000 rte_virtio_pmd
EAL: Device is blacklisted, not initializing
EAL: PCI device 0000:00:08.0 on NUMA socket -1
EAL: probe driver: 1af4:1000 rte_virtio_pmd
PMD: parse_sysfs_value(): parse_sysfs_value(): cannot open sysfs value
/sys/bus/pci/devices/0000:00:08.0/uio/uio0/portio/port0/size
PMD: virtio_resource_init_by_uio(): virtio_resource_init_by_uio():
cannot parse size
PMD: virtio_resource_init_by_ioports(): PCI Port IO found start=0xd040
with size=0x20
PMD: virtio_negotiate_features(): guest_features before negotiate = cf8020
PMD: virtio_negotiate_features(): host_features before negotiate = 410fdda3
PMD: virtio_negotiate_features(): features after negotiate = f8020
PMD: eth_virtio_dev_init(): PORT MAC: 08:00:27:CC:DE:CD
PMD: eth_virtio_dev_init(): VIRTIO_NET_F_MQ is not supported
PMD: virtio_dev_cq_queue_setup(): >>
PMD: virtio_dev_queue_setup(): selecting queue: 2
PMD: virtio_dev_queue_setup(): vq_size: 16 nb_desc:0
PMD: virtio_dev_queue_setup(): vring_size: 4228, rounded_vring_size: 8192
PMD: virtio_dev_queue_setup(): vq->vq_ring_mem: 0x67b54000
PMD: virtio_dev_queue_setup(): vq->vq_ring_virt_mem: 0x7f2c4eb54000
PMD: eth_virtio_dev_init(): config->max_virtqueue_pairs=1
PMD: eth_virtio_dev_init(): config->status=1
PMD: eth_virtio_dev_init(): PORT MAC: 08:00:27:CC:DE:CD
PMD: eth_virtio_dev_init(): hw->max_rx_queues=1 hw->max_tx_queues=1
PMD: eth_virtio_dev_init(): port 0 vendorID=0x1af4 deviceID=0x1000
PMD: virtio_dev_vring_start(): >>
EAL: PCI device 0000:00:09.0 on NUMA socket -1
EAL: probe driver: 1af4:1000 rte_virtio_pmd
PMD: parse_sysfs_value(): parse_sysfs_value(): cannot open sysfs value
/sys/bus/pci/devices/0000:00:09.0/uio/uio1/portio/port0/size
PMD: virtio_resource_init_by_uio(): virtio_resource_init_by_uio():
cannot parse size
PMD: virtio_resource_init_by_ioports(): PCI Port IO found start=0xd060
with size=0x20
PMD: virtio_negotiate_features(): guest_features before negotiate = cf8020
PMD: virtio_negotiate_features(): host_features before negotiate = 410fdda3
PMD: virtio_negotiate_features(): features after negotiate = f8020
PMD: eth_virtio_dev_init(): PORT MAC: 08:00:27:07:D3:F5
PMD: eth_virtio_dev_init(): VIRTIO_NET_F_MQ is not supported
PMD: virtio_dev_cq_queue_setup(): >>
PMD: virtio_dev_queue_setup(): selecting queue: 2
PMD: virtio_dev_queue_setup(): vq_size: 16 nb_desc:0
PMD: virtio_dev_queue_setup(): vring_size: 4228, rounded_vring_size: 8192
PMD: virtio_dev_queue_setup(): vq->vq_ring_mem: 0x67b50000
PMD: virtio_dev_queue_setup(): vq->vq_ring_virt_mem: 0x7f2c4eb50000
PMD: eth_virtio_dev_init(): config->max_virtqueue_pairs=1
PMD: eth_virtio_dev_init(): config->status=1
PMD: eth_virtio_dev_init(): PORT MAC: 08:00:27:07:D3:F5
PMD: eth_virtio_dev_init(): hw->max_rx_queues=1 hw->max_tx_queues=1
PMD: eth_virtio_dev_init(): port 1 vendorID=0x1af4 deviceID=0x1000
PMD: virtio_dev_vring_start(): >>
Interactive-mode selected
Configuring Port 0 (socket 0)
PMD: virtio_dev_configure(): configure
PMD: virtio_dev_tx_queue_setup(): >>
PMD: virtio_dev_queue_setup(): selecting queue: 1
PMD: virtio_dev_queue_setup(): vq_size: 256 nb_desc:512
PMD: virtio_dev_queue_setup(): vring_size: 10244, rounded_vring_size: 12288
PMD: virtio_dev_queue_setup(): vq->vq_ring_mem: 0x5fb000
PMD: virtio_dev_queue_setup(): vq->vq_ring_virt_mem: 0x7f2c8e1fb000
PMD: virtio_dev_rx_queue_setup(): >>
PMD: virtio_dev_queue_setup(): selecting queue: 0
PMD: virtio_dev_queue_setup(): vq_size: 256 nb_desc:128
PMD: virtio_dev_queue_setup(): vring_size: 10244, rounded_vring_size: 12288
PMD: virtio_dev_queue_setup(): vq->vq_ring_mem: 0x5f6000
PMD: virtio_dev_queue_setup(): vq->vq_ring_virt_mem: 0x7f2c8e1f6000
PMD: virtio_dev_link_update(): Get link status from hw
PMD: virtio_dev_link_update(): Port 0 is up
PMD: virtio_dev_rxtx_start(): >>
PMD: virtio_dev_vring_start(): >>
PMD: virtio_dev_vring_start(): Allocated 256 bufs
PMD: virtio_dev_vring_start(): >>
PMD: virtio_dev_start(): nb_queues=1
PMD: virtio_dev_start(): Notified backend at initialization
PMD: virtio_send_command(): vq->vq_desc_head_idx = 0, status = 255,
vq->hw->cvq = 0x7f2c4eb567c0 vq = 0x7f2c4eb567c0
PMD: virtio_send_command(): vq->vq_queue_index = 2
[... blocking]
next prev parent reply other threads:[~2015-10-12 20:58 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-18 15:10 [PATCH v5 resend 00/12] vhost-user multiple queues enabling Yuanhan Liu
2015-09-18 15:10 ` [PATCH v5 resend 01/12] vhost-user: add protocol features support Yuanhan Liu
2015-09-18 15:10 ` [PATCH v5 resend 02/12] vhost-user: add VHOST_USER_GET_QUEUE_NUM message Yuanhan Liu
2015-09-18 15:10 ` [PATCH v5 resend 03/12] vhost: vring queue setup for multiple queue support Yuanhan Liu
2015-09-20 13:58 ` Marcel Apfelbaum
2015-09-21 2:06 ` Yuanhan Liu
2015-09-21 17:56 ` Marcel Apfelbaum
2015-09-22 7:31 ` Yuanhan Liu
2015-09-22 8:10 ` Marcel Apfelbaum
2015-09-22 8:34 ` Yuanhan Liu
2015-09-22 8:47 ` Marcel Apfelbaum
2015-09-22 9:21 ` Yuanhan Liu
2015-09-22 10:06 ` Marcel Apfelbaum
2015-09-22 14:22 ` Yuanhan Liu
2015-09-22 14:51 ` Marcel Apfelbaum
2015-09-23 3:46 ` Yuanhan Liu
2015-09-24 9:51 ` Marcel Apfelbaum
2015-09-21 9:07 ` Michael S. Tsirkin
2015-09-18 15:10 ` [PATCH v5 resend 04/12] vhost: rxtx: prepare work " Yuanhan Liu
2015-09-20 9:29 ` Michael S. Tsirkin
2015-09-21 2:25 ` Yuanhan Liu
2015-09-21 9:04 ` Michael S. Tsirkin
2015-09-22 2:54 ` Yuanhan Liu
2015-09-18 15:10 ` [PATCH v5 resend 05/12] vhost: add VHOST_USER_SET_VRING_ENABLE message Yuanhan Liu
2015-09-20 9:37 ` Michael S. Tsirkin
2015-09-21 2:22 ` Yuanhan Liu
2015-09-21 9:02 ` Michael S. Tsirkin
2015-09-22 2:21 ` Yuanhan Liu
2015-09-23 8:43 ` Yuanhan Liu
2015-09-18 15:10 ` [PATCH v5 resend 06/12] vhost-user: handle VHOST_USER_RESET_OWNER correctly Yuanhan Liu
2015-09-18 15:10 ` [PATCH v5 resend 07/12] virtio: resolve for control queue Yuanhan Liu
2015-09-20 9:21 ` Michael S. Tsirkin
2015-09-21 6:36 ` Yuanhan Liu
2015-10-08 15:32 ` Nikita Kalyazin
2015-10-08 20:51 ` Steffen Bauch
2015-10-09 7:11 ` Nikita Kalyazin
2015-10-12 8:39 ` Yuanhan Liu
2015-10-12 9:31 ` Xie, Huawei
2015-10-12 9:56 ` Xie, Huawei
2015-10-12 20:58 ` Steffen Bauch [this message]
2015-10-13 9:54 ` Yuanhan Liu
2015-09-18 15:10 ` [PATCH v5 resend 08/12] vhost-user: enable vhost-user multiple queue Yuanhan Liu
2015-09-18 15:10 ` [PATCH v5 resend 09/12] vhost: add API bind a virtq to a specific core Yuanhan Liu
2015-09-18 15:10 ` [PATCH v5 resend 10/12] ixgbe: support VMDq RSS in non-SRIOV environment Yuanhan Liu
2015-09-18 15:11 ` [PATCH v5 resend 11/12] examples/vhost: demonstrate the usage of vhost mq feature Yuanhan Liu
2015-09-18 15:11 ` [PATCH v5 resend 12/12] examples/vhost: add per queue stats Yuanhan Liu
2015-09-20 11:48 ` [PATCH v5 resend 00/12] vhost-user multiple queues enabling Marcel Apfelbaum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=561C1EE9.4040001@steffenbauch.de \
--to=mail@steffenbauch.de \
--cc=dev@dpdk.org \
--cc=n.kalyazin@samsung.com \
--cc=yuanhan.liu@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.