Re: musb: communication issue with more than 12 FTDI ports

[Bin Liu <b-liu-l0cyMroinI0@public.gmane.org>]

On 10/14/2015 10:56 AM, Felipe Balbi wrote:
>
> Hi,
>
> Bin Liu <b-liu-l0cyMroinI0@public.gmane.org> writes:
>> Hi,
>>
>> On 10/13/2015 01:22 PM, Felipe Balbi wrote:
>>> Yegor Yefremov <yegorslists-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org> writes:
>>>> On Mon, Oct 12, 2015 at 11:34 AM, Yegor Yefremov
>>>> <yegorslists-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org> wrote:
>>>>> We have a problem, when using more than 12 FTDI ports. Kernels tried:
>>>>> 3.18.1, 4.2.3 and 4.3-rc5. SoC am335x 600MHz
>>>>>
>>>>> Below the USB topology:
>>>>>
>>>>> # lsusb -t
>>>>> /:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=musb-hdrc/1p, 480M
>>>>> /:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=musb-hdrc/1p, 480M
>>>>>       |__ Port 1: Dev 2, If 0, Class=, Driver=hub/4p, 480M
>>>>>           |__ Port 1: Dev 9, If 0, Class=, Driver=hub/4p, 480M
>>>>>               |__ Port 1: Dev 10, If 0, Class=, Driver=ftdi_sio, 12M
>>>>>               |__ Port 2: Dev 11, If 0, Class=, Driver=ftdi_sio, 480M
>>>>>               |__ Port 2: Dev 11, If 1, Class=, Driver=ftdi_sio, 480M
>>>>>               |__ Port 2: Dev 11, If 2, Class=, Driver=ftdi_sio, 480M
>>>>>               |__ Port 2: Dev 11, If 3, Class=, Driver=ftdi_sio, 480M
>>>>>               |__ Port 3: Dev 12, If 0, Class=, Driver=ftdi_sio, 480M
>>>>>               |__ Port 3: Dev 12, If 1, Class=, Driver=ftdi_sio, 480M
>>>>>               |__ Port 3: Dev 12, If 2, Class=, Driver=ftdi_sio, 480M
>>>>>               |__ Port 3: Dev 12, If 3, Class=, Driver=ftdi_sio, 480M
>>>>>           |__ Port 2: Dev 4, If 0, Class=, Driver=ftdi_sio, 480M
>>>>>           |__ Port 2: Dev 4, If 1, Class=, Driver=ftdi_sio, 480M
>>>>>           |__ Port 2: Dev 4, If 2, Class=, Driver=ftdi_sio, 480M
>>>>>           |__ Port 2: Dev 4, If 3, Class=, Driver=ftdi_sio, 480M
>>>>>           |__ Port 3: Dev 7, If 0, Class=, Driver=ftdi_sio, 480M
>>>>>           |__ Port 3: Dev 7, If 1, Class=, Driver=ftdi_sio, 480M
>>>>>           |__ Port 3: Dev 7, If 2, Class=, Driver=ftdi_sio, 480M
>>>>>           |__ Port 3: Dev 7, If 3, Class=, Driver=ftdi_sio, 480M
>>
>> How many EPs does each FTDI device require? at least one INT EP, right?
>> If I read it right, the topology above has 2 hubs, and 16 high-speed
>> FTDI and 1 full-speed FTDI. So it requires at least 18 high-speed INT
>> EPs. MUSB driver only has 11 high-speed EPs for mode-4 which is the EP
>> configuration used by default. I am wondering how those devices got
>> enumerated properly.
>
> dynamic EP allocation, but that has its own limitations.
>
MUSB does not support dynamic EP allocation for INT/ISOCH.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html