From: Hans Verkuil <hansverk@cisco.com>
To: linux-sh@vger.kernel.org
Subject: Re: [PATCH/RFT 0/7] HDMI capture on Lager
Date: Mon, 19 Oct 2015 14:54:53 +0000 [thread overview]
Message-ID: <5625043D.5010007@cisco.com> (raw)
In-Reply-To: <1445263660-6945-1-git-send-email-ulrich.hecht+renesas@gmail.com>
On 10/19/2015 04:07 PM, Ulrich Hecht wrote:
> Hi!
>
> This series is supposed to serve as a basis for testing the HDMI input on
> the Lager board. It is based on the series by William Towle, dropping the
> patches that have since been merged, and adding the interrupt to the adv7612
> DT description.
>
> The base of this series, Laurent's "pad config allocator" patch, had been
> deferred pending a retooling of the media controller framework. I could
> not, however, find significant activity in that area (read: the patch still
> applies)...
>
> With this series applied I was able to capture the top left quarter of the
> output of my Raspberry Pi. Whether this meager result is caused by the
> input device, the output device, the userland software, or me, I have yet to
> find out. I suspect the latter, as I have last used VIN on Linux with an
> Iomega Buz...
Please cross-post this to the linux-media mailinglist, otherwise it will
likely be lost.
BTW a lot of work is being done in the media controller framework, but
nothing has been merged yet. It looks likely to be merged for kernel 4.5.
Regards,
Hans
>
> CU
> Uli
>
>
> Ian Molton (1):
> ARM: shmobile: lager dts: specify default-input for ADV7612
>
> Laurent Pinchart (1):
> v4l: subdev: Add pad config allocator and init
>
> Rob Taylor (1):
> media: soc_camera: soc_scale_crop: Use correct pad number in try_fmt
>
> William Towle (4):
> media: soc_camera pad-aware driver initialisation
> media: rcar_vin: Use correct pad number in try_fmt
> ARM: shmobile: lager dts: Add entries for VIN HDMI input support
> media: adv7604: automatic "default-input" selection
>
> arch/arm/boot/dts/r8a7790-lager.dts | 41 +++++++++++++++++++++-
> drivers/media/i2c/adv7604.c | 25 +++++++++----
> drivers/media/platform/soc_camera/Kconfig | 1 +
> drivers/media/platform/soc_camera/rcar_vin.c | 18 +++++++---
> drivers/media/platform/soc_camera/soc_camera.c | 20 ++++++++++-
> drivers/media/platform/soc_camera/soc_scale_crop.c | 1 +
> drivers/media/v4l2-core/v4l2-subdev.c | 19 +++++++++-
> include/media/soc_camera.h | 1 +
> include/media/v4l2-subdev.h | 10 ++++++
> 9 files changed, 121 insertions(+), 15 deletions(-)
>
next prev parent reply other threads:[~2015-10-19 14:54 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-19 14:07 [PATCH/RFT 0/7] HDMI capture on Lager Ulrich Hecht
2015-10-19 14:54 ` Hans Verkuil [this message]
2015-10-27 9:22 ` Ulrich Hecht
2015-10-27 9:22 ` Ulrich Hecht
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5625043D.5010007@cisco.com \
--to=hansverk@cisco.com \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.