From: Alberto Mardegan <mardy@users.sourceforge.net>
To: "linux-media@vger.kernel.org" <linux-media@vger.kernel.org>
Subject: Trying to get Terratec Cinergy T XS to work
Date: Tue, 20 Oct 2015 20:08:34 +0300 [thread overview]
Message-ID: <56267512.6080207@users.sourceforge.net> (raw)
[-- Attachment #1: Type: text/plain, Size: 9568 bytes --]
Hi all!
I own a USB DVB-T receiver, Terratec Cinergy T XS, (0ccd:0043) which
as far as I can tell from google searches used to work with the old
"em28xx-new" driver.
I've downloaded the old driver from
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/460636/comments/2
and tried to modify the current media_tree drivers accordingly (please
see the attached patch), but I get an error when initializing the frontend:
=====================
Oct 20 19:33:20 mapperone kernel: [25479.846347] usb 2-1.1: new
high-speed USB device number 6 using ehci-pci
Oct 20 19:33:20 mapperone kernel: [25479.951208] usb 2-1.1: New USB
device found, idVendor=0ccd, idProduct=0043
Oct 20 19:33:20 mapperone kernel: [25479.951215] usb 2-1.1: New USB
device strings: Mfr=2, Product=1, SerialNumber=0
Oct 20 19:33:20 mapperone kernel: [25479.951220] usb 2-1.1: Product:
Cinergy T USB XS
Oct 20 19:33:20 mapperone kernel: [25479.951223] usb 2-1.1:
Manufacturer: TerraTec Electronic GmbH
Oct 20 19:33:20 mapperone mtp-probe: checking bus 2, device 6:
"/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1"
Oct 20 19:33:20 mapperone mtp-probe: bus: 2, device: 6 was not an MTP device
Oct 20 19:33:20 mapperone kernel: [25479.982735] em28xx: New device
TerraTec Electronic GmbH Cinergy T USB XS @ 480 Mbps (0ccd:0043,
interface 0, class 0)
Oct 20 19:33:20 mapperone kernel: [25479.982739] em28xx: Video interface
0 found: isoc
Oct 20 19:33:20 mapperone kernel: [25479.982740] em28xx: DVB interface 0
found: isoc
Oct 20 19:33:20 mapperone kernel: [25479.982859] em28xx: chip ID is em2870
Oct 20 19:33:20 mapperone kernel: [25480.110080] em2870 #0: EEPROM ID =
1a eb 67 95, EEPROM hash = 0x084c44df
Oct 20 19:33:20 mapperone kernel: [25480.110085] em2870 #0: EEPROM info:
Oct 20 19:33:20 mapperone kernel: [25480.110087] em2870 #0: No audio on
board.
Oct 20 19:33:20 mapperone kernel: [25480.110089] em2870 #0: 500mA max power
Oct 20 19:33:20 mapperone kernel: [25480.110092] em2870 #0: Table at
offset 0x06, strings=0x246a, 0x348e, 0x0000
Oct 20 19:33:20 mapperone kernel: [25480.110096] em2870 #0: Identified
as Terratec Cinergy T XS (card=43)
Oct 20 19:33:20 mapperone kernel: [25480.110099] em2870 #0: analog set
to isoc mode.
Oct 20 19:33:20 mapperone kernel: [25480.110101] em2870 #0: dvb set to
isoc mode.
Oct 20 19:33:20 mapperone kernel: [25480.110149] usbcore: registered new
interface driver em28xx
Oct 20 19:33:20 mapperone kernel: [25480.113975] em2870 #0: Registering
V4L2 extension
Oct 20 19:33:20 mapperone kernel: [25480.118352] Chip ID is not zero. It
is not a TEA5767
Oct 20 19:33:20 mapperone kernel: [25480.118361] tuner 7-0060: Tuner -1
found with type(s) Radio TV.
Oct 20 19:33:20 mapperone kernel: [25480.118390] xc2028 7-0060: creating
new instance
Oct 20 19:33:20 mapperone kernel: [25480.118397] xc2028 7-0060: type set
to XCeive xc2028/xc3028 tuner
Oct 20 19:33:20 mapperone kernel: [25480.118453] xc2028 7-0060: Loading
80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
Oct 20 19:33:21 mapperone kernel: [25480.166568] xc2028 7-0060: Loading
firmware for type=BASE (1), id 0000000000000000.
Oct 20 19:33:22 mapperone kernel: [25481.248675] xc2028 7-0060: Loading
firmware for type=(0), id 000000000000b700.
Oct 20 19:33:22 mapperone kernel: [25481.266071] SCODE (20000000), id
000000000000b700:
Oct 20 19:33:22 mapperone kernel: [25481.266078] xc2028 7-0060: Loading
SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
Oct 20 19:33:22 mapperone kernel: [25481.270699] xc2028 7-0060:
Incorrect readback of firmware version.
Oct 20 19:33:22 mapperone kernel: [25481.371524] xc2028 7-0060: Loading
firmware for type=BASE (1), id 0000000000000000.
Oct 20 19:33:23 mapperone kernel: [25482.449292] xc2028 7-0060: Loading
firmware for type=(0), id 000000000000b700.
Oct 20 19:33:23 mapperone kernel: [25482.466803] SCODE (20000000), id
000000000000b700:
Oct 20 19:33:23 mapperone kernel: [25482.466811] xc2028 7-0060: Loading
SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
Oct 20 19:33:23 mapperone kernel: [25482.471431] xc2028 7-0060:
Incorrect readback of firmware version.
Oct 20 19:33:23 mapperone kernel: [25482.572622] xc2028 7-0060: Loading
firmware for type=BASE (1), id 0000000000000000.
Oct 20 19:33:24 mapperone kernel: [25483.650635] xc2028 7-0060: Loading
firmware for type=(0), id 000000000000b700.
Oct 20 19:33:24 mapperone kernel: [25483.667777] SCODE (20000000), id
000000000000b700:
Oct 20 19:33:24 mapperone kernel: [25483.667784] xc2028 7-0060: Loading
SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
Oct 20 19:33:24 mapperone kernel: [25483.672770] xc2028 7-0060:
Incorrect readback of firmware version.
Oct 20 19:33:24 mapperone kernel: [25483.773478] xc2028 7-0060: Loading
firmware for type=BASE (1), id 0000000000000000.
Oct 20 19:33:25 mapperone kernel: [25484.851617] xc2028 7-0060: Loading
firmware for type=(0), id 000000000000b700.
Oct 20 19:33:25 mapperone kernel: [25484.869042] SCODE (20000000), id
000000000000b700:
Oct 20 19:33:25 mapperone kernel: [25484.869050] xc2028 7-0060: Loading
SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
Oct 20 19:33:25 mapperone kernel: [25484.873894] xc2028 7-0060:
Incorrect readback of firmware version.
Oct 20 19:33:25 mapperone kernel: [25484.974459] xc2028 7-0060: Loading
firmware for type=BASE (1), id 0000000000000000.
Oct 20 19:33:26 mapperone kernel: [25486.048343] xc2028 7-0060: Loading
firmware for type=(0), id 000000000000b700.
Oct 20 19:33:26 mapperone kernel: [25486.065594] SCODE (20000000), id
000000000000b700:
Oct 20 19:33:26 mapperone kernel: [25486.065603] xc2028 7-0060: Loading
SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
Oct 20 19:33:26 mapperone kernel: [25486.070111] xc2028 7-0060:
Incorrect readback of firmware version.
Oct 20 19:33:27 mapperone kernel: [25486.171441] xc2028 7-0060: Loading
firmware for type=BASE (1), id 0000000000000000.
Oct 20 19:33:28 mapperone kernel: [25487.249074] xc2028 7-0060: Loading
firmware for type=(0), id 000000000000b700.
Oct 20 19:33:28 mapperone kernel: [25487.266062] SCODE (20000000), id
000000000000b700:
Oct 20 19:33:28 mapperone kernel: [25487.266071] xc2028 7-0060: Loading
SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
Oct 20 19:33:28 mapperone kernel: [25487.270473] xc2028 7-0060:
Incorrect readback of firmware version.
Oct 20 19:33:28 mapperone kernel: [25487.372459] xc2028 7-0060: Loading
firmware for type=BASE (1), id 0000000000000000.
Oct 20 19:33:29 mapperone kernel: [25488.450426] xc2028 7-0060: Loading
firmware for type=(0), id 000000000000b700.
Oct 20 19:33:29 mapperone kernel: [25488.467550] SCODE (20000000), id
000000000000b700:
Oct 20 19:33:29 mapperone kernel: [25488.467559] xc2028 7-0060: Loading
SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
Oct 20 19:33:29 mapperone kernel: [25488.472077] xc2028 7-0060:
Incorrect readback of firmware version.
Oct 20 19:33:29 mapperone kernel: [25488.573395] xc2028 7-0060: Loading
firmware for type=BASE (1), id 0000000000000000.
Oct 20 19:33:30 mapperone kernel: [25489.651157] xc2028 7-0060: Loading
firmware for type=(0), id 000000000000b700.
Oct 20 19:33:30 mapperone kernel: [25489.668147] SCODE (20000000), id
000000000000b700:
Oct 20 19:33:30 mapperone kernel: [25489.668156] xc2028 7-0060: Loading
SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
Oct 20 19:33:30 mapperone kernel: [25489.672651] xc2028 7-0060:
Incorrect readback of firmware version.
Oct 20 19:33:30 mapperone kernel: [25489.774369] xc2028 7-0060: Loading
firmware for type=BASE (1), id 0000000000000000.
Oct 20 19:33:31 mapperone kernel: [25490.848007] xc2028 7-0060: Loading
firmware for type=(0), id 000000000000b700.
Oct 20 19:33:31 mapperone kernel: [25490.864749] SCODE (20000000), id
000000000000b700:
Oct 20 19:33:31 mapperone kernel: [25490.864758] xc2028 7-0060: Loading
SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
Oct 20 19:33:31 mapperone kernel: [25490.869146] xc2028 7-0060:
Incorrect readback of firmware version.
Oct 20 19:33:31 mapperone kernel: [25490.993349] em2870 #0: V4L2 video
device registered as video0
Oct 20 19:33:31 mapperone kernel: [25490.993355] em2870 #0: V4L2
extension successfully initialized
Oct 20 19:33:31 mapperone kernel: [25490.993359] em28xx: Registered
(Em28xx v4l2 Extension) extension
Oct 20 19:33:31 mapperone kernel: [25490.998127] em2870 #0: Binding DVB
extension
Oct 20 19:33:31 mapperone kernel: [25491.027059] zl10353_read_register:
readreg error (reg=127, ret==-6)
Oct 20 19:33:31 mapperone kernel: [25491.027380] mt352_read_register:
readreg error (reg=127, ret==-6)
Oct 20 19:33:31 mapperone kernel: [25491.027395] em2870 #0: /2: dvb
frontend not attached. Can't attach xc3028
Oct 20 19:33:31 mapperone kernel: [25491.027410] em28xx: Registered
(Em28xx dvb Extension) extension
=====================
As you can see, in my patch I added a couple of printk to
zl10353_init(), but I don't see them in the logs (while I can definitely
see that my em28xx driver is otherwise being used, as with the official
one I don't even see the "zl10353_read_register" line). Can someone
please guide me to debug the issue?
I found an old post to this ML where a user reports a very similar log
file, but without replies:
https://www.mail-archive.com/linux-media@vger.kernel.org/msg13180.html
Any suggestions on what I could try?
Ciao,
Alberto
--
http://blog.mardy.it <- geek in un lingua international!
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: em28xx.diff --]
[-- Type: text/x-patch; name="em28xx.diff", Size: 1901 bytes --]
diff --git a/drivers/media/dvb-frontends/zl10353.c b/drivers/media/dvb-frontends/zl10353.c
index ef9764a..b7558b2 100644
--- a/drivers/media/dvb-frontends/zl10353.c
+++ b/drivers/media/dvb-frontends/zl10353.c
@@ -572,12 +572,14 @@ static int zl10353_init(struct dvb_frontend *fe)
/* Do a "hard" reset if not already done */
if (zl10353_read_register(state, 0x50) != zl10353_reset_attach[1] ||
zl10353_read_register(state, 0x51) != zl10353_reset_attach[2]) {
+ printk("zl10353: performing reset\n");
zl10353_write(fe, zl10353_reset_attach,
sizeof(zl10353_reset_attach));
if (debug_regs)
zl10353_dump_regs(fe);
}
+ printk("zl10353: init complete\n");
return 0;
}
diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c
index 3940046..1a77050 100644
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -1045,9 +1045,11 @@ struct em28xx_board em28xx_boards[] = {
[EM2870_BOARD_TERRATEC_XS] = {
.name = "Terratec Cinergy T XS",
- .valid = EM28XX_BOARD_NOT_VALIDATED,
+ /*.valid = EM28XX_BOARD_NOT_VALIDATED,*/
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
+ .has_dvb = 1,
+ .dvb_gpio = default_digital,
},
[EM2870_BOARD_TERRATEC_XS_MT2060] = {
.name = "Terratec Cinergy T XS (MT2060)",
diff --git a/drivers/media/usb/em28xx/em28xx-dvb.c b/drivers/media/usb/em28xx/em28xx-dvb.c
index 357be76..b94b903 100644
--- a/drivers/media/usb/em28xx/em28xx-dvb.c
+++ b/drivers/media/usb/em28xx/em28xx-dvb.c
@@ -1121,6 +1121,7 @@ static int em28xx_dvb_init(struct em28xx *dev)
goto out_free;
}
break;
+ case EM2870_BOARD_TERRATEC_XS:
case EM2880_BOARD_TERRATEC_HYBRID_XS:
case EM2880_BOARD_TERRATEC_HYBRID_XS_FR:
case EM2881_BOARD_PINNACLE_HYBRID_PRO:
next reply other threads:[~2015-10-20 17:08 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-20 17:08 Alberto Mardegan [this message]
2015-10-21 19:28 ` Trying to get Terratec Cinergy T XS to work Alberto Mardegan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56267512.6080207@users.sourceforge.net \
--to=mardy@users.sourceforge.net \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.