From: Hans de Goede <hdegoede@redhat.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Please pull u-boot-sunxi master
Date: Tue, 20 Oct 2015 23:02:54 +0200 [thread overview]
Message-ID: <5626ABFE.2060407@redhat.com> (raw)
Hi Tom,
Here is the first pull-req for sunxi, it contains some none
sunxi specific patches which I've picked up as sunxi is the first
user of them, these patches have been reviewed by you and/or
Simon Glass.
Highlights:
-Only simple-malloc in SPL (also post "reloc") to save space
-Remove a couple of board-configs which have been replaced with more generic shared board-configs
-Fully Kconfig-ify the pmic and voltage selection
-Add support for the BPI-M2 and the CHIP
The following changes since commit 5ec0003b19cbdf06ccd6941237cbc0d1c3468e2d:
Prepare v2015.10 (2015-10-19 19:59:38 -0400)
are available in the git repository at:
http://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to fd8133b725198978865ead730ff20d3991e05f20:
sunxi: Add CHIP support (2015-10-20 22:48:29 +0200)
----------------------------------------------------------------
Hans de Goede (19):
spl: spl_relocate_stack_gd: Do not unnecessarily clear bss
malloc_simple: Add Kconfig option for using only malloc_simple in the SPL
malloc_simple: Add support for switching to DRAM heap
sunxi: Enable CONFIG_SPL_STACK_R
sunxi: Switch to using malloc_simple for the spl
sunxi: Remove board defconfig-s for specific Q8 tablet PCB-s
sunxi: Kconfig-ify CONFIG_AXP152_POWER and _AXP209_POWER
sunxi: power: Make all voltages configurable through Kconfig
sunxi: power: Unify axp pmic function names
sunxi: power: Change A23/A33 VDD-SYS default from 1.2V to 1.1V
sunxi: power: Change A23/A33 aldo1 default voltage to 3.0V
sunxi: power: Use pmic_bus functions for axp152 / axp209 driver
sunxi: power: Drop protection against multiple calls from axp221 axp_init()
sunxi: power: Add support for disabling axp209 regulators
sunxi: power: Change axp209 LDO3 and LDO4 default to disabled
sunxi: power: Columbus: only enable ELDO3 when necessary
sunxi: Add a bootcmd_sunxi_compat to the default environment to boot old kernels
sunxi: Fix sorting of boards in MAINTAINERS
sunxi: Add defconfig for the Sinovoip BPI-M2 board
Maxime Ripard (8):
sunxi: Add support for android boot image
fastboot: Implement OEM format only when we have MMC support
mmc: Add generic Kconfig option
sunxi: board: Only try to use the MMC related functions if enabled
sunxi: Use Kconfig CONFIG_MMC
sun5i: Sync the DTSI with the kernel
axp209: Sync the DTSI with the kernel
sunxi: Add CHIP support
Kconfig | 20 ++
arch/arm/Kconfig | 2 +
arch/arm/cpu/armv7/sunxi/board.c | 7 +-
arch/arm/cpu/armv7/sunxi/cpu_info.c | 4 +-
arch/arm/cpu/armv7/sunxi/usb_phy.c | 9 -
arch/arm/dts/Makefile | 12 +-
arch/arm/dts/axp209.dtsi | 5 +
arch/arm/dts/sun5i-a10s.dtsi | 47 ++++-
arch/arm/dts/sun5i-a13-forfun-q88db.dts | 29 ---
arch/arm/dts/sun5i-a13-tzx-q8-713b7.dts | 29 ---
arch/arm/dts/sun5i-a13.dtsi | 28 ++-
...sun8i-a23-ippo-q8h-v5.dts => sun5i-r8-chip.dts} | 158 ++++++++++++----
.../{sun8i-a23-ippo-q8h-v1.2.dts => sun5i-r8.dtsi} | 25 ++-
arch/arm/dts/sun5i.dtsi | 22 +++
arch/arm/dts/sun6i-a31.dtsi | 18 ++
...q8h-v1.2.dts => sun6i-a31s-sinovoip-bpi-m2.dts} | 153 ++++++++++-----
arch/arm/dts/sun8i-a33-et-q8-v1.6.dts | 88 ---------
board/sunxi/Kconfig | 8 +
board/sunxi/MAINTAINERS | 26 +--
board/sunxi/board.c | 68 +++----
common/malloc_simple.c | 2 +-
common/spl/spl.c | 13 +-
configs/A10-OLinuXino-Lime_defconfig | 2 +-
configs/A10s-OLinuXino-M_defconfig | 3 +-
configs/A13-OLinuXinoM_defconfig | 1 +
configs/A13-OLinuXino_defconfig | 2 +-
configs/A20-OLinuXino-Lime2_defconfig | 2 +-
configs/A20-OLinuXino-Lime_defconfig | 2 +-
configs/A20-OLinuXino_MICRO_defconfig | 2 +-
configs/A20-Olimex-SOM-EVB_defconfig | 2 +-
configs/Ainol_AW1_defconfig | 1 -
configs/Ampe_A76_defconfig | 2 +-
configs/Auxtek-T003_defconfig | 2 +-
configs/Auxtek-T004_defconfig | 2 +-
configs/Bananapi_defconfig | 2 +-
configs/Bananapro_defconfig | 2 +-
configs/CHIP_defconfig | 14 ++
configs/CSQ_CS908_defconfig | 4 +-
configs/Chuwi_V7_CW0825_defconfig | 1 -
configs/Colombus_defconfig | 3 +-
configs/Cubieboard2_defconfig | 2 +-
configs/Cubieboard_defconfig | 2 +-
configs/Cubietruck_defconfig | 2 +-
configs/Et_q8_v1_6_defconfig | 23 ---
configs/Hummingbird_A31_defconfig | 2 +-
configs/Hyundai_A7HD_defconfig | 1 -
configs/Ippo_q8h_v1_2_a33_1024x600_defconfig | 24 ---
configs/Ippo_q8h_v1_2_defconfig | 24 ---
configs/Ippo_q8h_v5_defconfig | 24 ---
configs/Linksprite_pcDuino3_Nano_defconfig | 2 +-
configs/Linksprite_pcDuino3_defconfig | 2 +-
configs/Linksprite_pcDuino_defconfig | 2 +-
configs/MK808C_defconfig | 1 -
configs/MSI_Primo73_defconfig | 1 -
configs/MSI_Primo81_defconfig | 2 +-
configs/Mele_A1000G_quad_defconfig | 8 +-
configs/Mele_A1000_defconfig | 2 +-
configs/Mele_I7_defconfig | 8 +-
configs/Mele_M3_defconfig | 2 +-
configs/Mele_M9_defconfig | 8 +-
configs/Mini-X_defconfig | 1 -
configs/Orangepi_defconfig | 2 +-
configs/Orangepi_mini_defconfig | 2 +-
configs/Sinlinx_SinA33_defconfig | 1 -
configs/Sinovoip_BPI_M2_defconfig | 18 ++
configs/TZX-Q8-713B7_defconfig | 21 ---
configs/UTOO_P66_defconfig | 1 -
configs/Wexler_TAB7200_defconfig | 1 -
configs/Wits_Pro_A20_DKT_defconfig | 2 +-
configs/Wobo_i5_defconfig | 1 -
configs/Yones_Toptech_BD1078_defconfig | 1 -
configs/ba10_tv_box_defconfig | 2 +-
configs/forfun_q88db_defconfig | 20 --
configs/ga10h_v1_1_defconfig | 3 +-
configs/gt90h_v4_defconfig | 4 +-
configs/i12-tvbox_defconfig | 2 +-
configs/iNet_3F_defconfig | 1 -
configs/iNet_3W_defconfig | 1 -
configs/iNet_86VS_defconfig | 1 -
configs/inet1_defconfig | 1 -
configs/inet97fv2_defconfig | 1 -
configs/inet98v_rev2_defconfig | 2 +-
configs/inet9f_rev03_defconfig | 1 -
configs/jesurun_q5_defconfig | 2 +-
configs/mixtile_loftq_defconfig | 2 +-
configs/mk802_a10s_defconfig | 2 +-
configs/mk802_defconfig | 1 +
configs/mk802ii_defconfig | 1 -
configs/pov_protab2_ips9_defconfig | 1 -
configs/q8_a13_tablet_defconfig | 2 +-
configs/q8_a23_tablet_800x480_defconfig | 3 +-
configs/q8_a33_tablet_1024x600_defconfig | 3 +-
configs/q8_a33_tablet_800x480_defconfig | 3 +-
configs/r7-tv-dongle_defconfig | 2 +-
configs/sunxi_Gemei_G9_defconfig | 1 -
drivers/gpio/axp_gpio.c | 11 +-
drivers/mmc/Kconfig | 6 +
drivers/power/Kconfig | 208 ++++++++++++++++-----
drivers/power/axp152.c | 40 ++--
drivers/power/axp209.c | 117 ++++++------
drivers/power/axp221.c | 41 ++--
drivers/usb/gadget/f_fastboot.c | 2 +-
drivers/video/sunxi_display.c | 6 +-
include/_exports.h | 2 +-
include/axp152.h | 6 -
include/axp209.h | 17 +-
include/axp221.h | 16 --
include/axp_pmic.h | 37 ++++
include/configs/sunxi-common.h | 37 +++-
include/exports.h | 2 +-
include/malloc.h | 2 +-
111 files changed, 876 insertions(+), 751 deletions(-)
delete mode 100644 arch/arm/dts/sun5i-a13-forfun-q88db.dts
delete mode 100644 arch/arm/dts/sun5i-a13-tzx-q8-713b7.dts
rename arch/arm/dts/{sun8i-a23-ippo-q8h-v5.dts => sun5i-r8-chip.dts} (51%)
rename arch/arm/dts/{sun8i-a23-ippo-q8h-v1.2.dts => sun5i-r8.dtsi} (82%)
rename arch/arm/dts/{sun8i-a33-ippo-q8h-v1.2.dts => sun6i-a31s-sinovoip-bpi-m2.dts} (50%)
delete mode 100644 arch/arm/dts/sun8i-a33-et-q8-v1.6.dts
create mode 100644 configs/CHIP_defconfig
delete mode 100644 configs/Et_q8_v1_6_defconfig
delete mode 100644 configs/Ippo_q8h_v1_2_a33_1024x600_defconfig
delete mode 100644 configs/Ippo_q8h_v1_2_defconfig
delete mode 100644 configs/Ippo_q8h_v5_defconfig
create mode 100644 configs/Sinovoip_BPI_M2_defconfig
delete mode 100644 configs/TZX-Q8-713B7_defconfig
delete mode 100644 configs/forfun_q88db_defconfig
create mode 100644 include/axp_pmic.h
Regards,
Hans
next reply other threads:[~2015-10-20 21:02 UTC|newest]
Thread overview: 111+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-20 21:02 Hans de Goede [this message]
2015-10-21 13:10 ` [U-Boot] Please pull u-boot-sunxi master Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2016-10-30 11:52 Hans de Goede
2016-10-30 18:15 ` Tom Rini
2016-10-10 8:17 Hans de Goede
2016-10-13 0:48 ` Tom Rini
2016-09-18 14:56 Hans de Goede
2016-09-19 0:31 ` Tom Rini
2016-08-26 18:42 Hans de Goede
2016-08-29 12:00 ` Tom Rini
2016-07-31 20:19 Hans de Goede
2016-08-01 0:34 ` Tom Rini
2016-07-26 22:30 Hans de Goede
2016-07-27 0:58 ` Tom Rini
2016-07-27 2:38 ` Chen-Yu Tsai
2016-07-27 13:18 ` Hans de Goede
2016-07-15 14:29 Hans de Goede
2016-07-16 13:52 ` Tom Rini
2016-07-16 17:54 ` Andreas Färber
2016-07-16 21:48 ` Tom Rini
2016-07-02 19:51 Hans de Goede
2016-07-05 2:44 ` Tom Rini
2016-06-20 21:03 Hans de Goede
2016-06-21 4:44 ` Tom Rini
2016-06-10 19:25 Hans de Goede
2016-06-19 14:07 ` Tom Rini
2016-05-25 16:15 Hans de Goede
2016-05-26 15:49 ` Tom Rini
2016-04-28 14:42 Hans de Goede
2016-04-28 22:44 ` Tom Rini
2016-04-12 9:07 Hans de Goede
2016-04-12 17:23 ` Tom Rini
2016-04-01 11:38 Hans de Goede
2016-04-01 17:00 ` Tom Rini
[not found] ` <20160402182702.GA2671@excalibur.cnev.de>
2016-04-02 21:42 ` Hans de Goede
2016-04-03 1:11 ` Tom Rini
2016-03-23 22:13 Hans de Goede
2016-03-25 22:59 ` Tom Rini
2016-02-23 20:29 Hans de Goede
2016-02-23 20:35 ` Tom Rini
2016-01-26 19:51 Hans de Goede
2016-01-27 2:04 ` Tom Rini
2015-12-21 20:39 Hans de Goede
2015-12-21 23:25 ` Tom Rini
2015-12-11 14:03 Hans de Goede
2015-12-12 1:13 ` Tom Rini
2015-11-22 11:22 Hans de Goede
2015-11-22 15:52 ` Tom Rini
2015-10-03 12:01 Hans de Goede
2015-10-03 12:06 ` Tom Rini
2015-10-03 12:08 ` Luc Verhaegen
2015-09-29 12:00 Hans de Goede
2015-10-03 0:35 ` Tom Rini
2015-09-11 15:15 Hans de Goede
2015-09-12 12:47 ` Tom Rini
2015-08-31 16:05 Hans de Goede
2015-08-31 21:46 ` Tom Rini
2015-08-14 7:09 Hans de Goede
2015-08-14 20:52 ` Tom Rini
2015-08-08 15:42 Hans de Goede
2015-08-11 0:33 ` Tom Rini
2015-07-25 12:41 Hans de Goede
2015-07-25 19:50 ` Tom Rini
2015-06-18 10:01 Hans de Goede
2015-06-18 22:45 ` Tom Rini
2015-06-10 14:54 Hans de Goede
2015-06-10 14:56 ` Tom Rini
2015-06-11 2:49 ` Simon Glass
2015-06-11 7:41 ` Hans de Goede
2015-06-11 12:56 ` Tom Rini
2015-06-11 13:44 ` Hans de Goede
2015-06-11 15:08 ` Tom Rini
2015-06-11 22:27 ` Bernhard Nortmann
2015-06-12 0:48 ` Tom Rini
2015-06-06 9:29 Hans de Goede
2015-06-06 13:27 ` Tom Rini
2015-05-30 9:18 Hans de Goede
2015-06-02 12:54 ` Tom Rini
2015-05-19 20:23 Hans de Goede
2015-05-21 13:10 ` Tom Rini
2015-05-04 15:21 Hans de Goede
2015-05-05 23:58 ` Tom Rini
2015-04-15 15:05 Hans de Goede
2015-04-16 20:41 ` Tom Rini
2015-04-04 13:41 Hans de Goede
2015-04-06 22:12 ` Tom Rini
2015-03-29 12:41 Hans de Goede
2015-03-26 12:24 Hans de Goede
2015-03-27 14:19 ` Tom Rini
2015-03-21 12:56 Hans de Goede
2015-03-24 20:29 ` Tom Rini
2015-03-10 15:00 Hans de Goede
2015-03-10 16:07 ` Tom Rini
2015-03-10 14:53 Hans de Goede
2015-02-21 18:22 Hans de Goede
2015-02-23 11:58 ` Tom Rini
2015-02-16 19:39 Hans de Goede
2015-02-17 20:24 ` Tom Rini
2015-02-02 14:19 Hans de Goede
2015-02-02 18:59 ` Tom Rini
2015-01-23 14:49 Hans de Goede
2015-01-23 21:57 ` Tom Rini
2015-01-14 14:16 Hans de Goede
2015-01-14 15:30 ` Tom Rini
2014-11-25 12:45 Hans de Goede
2014-11-25 17:52 ` Simon Glass
2014-11-25 21:52 ` Tom Rini
2014-11-26 9:20 ` Hans de Goede
2014-11-26 16:25 ` Tom Rini
2014-11-27 8:18 ` Hans de Goede
2014-11-26 16:24 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5626ABFE.2060407@redhat.com \
--to=hdegoede@redhat.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.