Doug,

在 2015年10月21日 12:25, Doug Anderson 写道:

Caesar,

On Tue, Oct 20, 2015 at 7:43 PM, Caesar Wang <wxt@rock-chips.com> wrote:

We need the OTP pin is gpio state before resetting the TSADC controller,
since the tshut polarity will generate a high signal.

It might or might not be "high" depending on polarity, right?  It's
just possible that it could glitch during probe.  Other than that nit,
this seems fine to me.

I think the description is right, maybe need other decriptions.
The tshut polarity is low in a short period of time when the TSADC controller is reset.

In other words,

If T < (setting temperature), the OTP output the High Signal. ------> if the otp out polarity is high, the TSHUT will work.
If T > (setting temperature), the OTP output the Low Signal.

If it's not too much trouble it'd be nice if you could spin with the
description change.  Otherwise:

Reviewed-by: Douglas Anderson <dianders@chromium.org>

-- 
Yours, 
Caesar