From: Przemyslaw Marczak <p.marczak@samsung.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 0/7] Add board detection for Odroid XU3 / XU3Lite / XU4
Date: Wed, 21 Oct 2015 12:13:52 +0200 [thread overview]
Message-ID: <56276560.7060908@samsung.com> (raw)
In-Reply-To: <CANAwSgQeCZq=EDQ374xSxD49wAx8md0sD6PjACb0gz0R8uH5qA@mail.gmail.com>
Hello Siarhei, Anand,
On 10/21/2015 11:57 AM, Anand Moon wrote:
> Hi Siarhei ,
>
> On 21 October 2015 at 07:28, Siarhei Siamashka
> <siarhei.siamashka@gmail.com> wrote:
>> On Mon, 31 Aug 2015 00:33:16 +0530
>> Anand Moon <linux.amoon@gmail.com> wrote:
>>
>>> At the last moment I got this to work on my odroidxu3 board.
>>>
>>> One problem I would like to address out is usb smsc95xx ethernet is not
>>> getting started at the boot.
>>>
>>> # usb start /* command failed at the start */
>>> ------------------------------------------------------------------------------------------------------
>>> U-Boot 2015.10-rc2-00226-g7dbe336 (Aug 30 2015 - 23:41:27 +0530) for
>>> ODROID-XU3
>>>
>>> CPU: Exynos5422 @ 800 MHz
>>> Model: Odroid XU3 based on EXYNOS5422
>>> Board: Odroid XU3 based on EXYNOS5422
>>> Model: xu3
>>> DRAM: 2 GiB
>>> MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1
>>> *** Warning - bad CRC, using default environment
>>>
>>> In: serial
>>> Out: serial
>>> Err: serial
>>> Net: No ethernet found.
>>> Hit any key to stop autoboot: 0
>>> switch to partitions #0, OK
>>> mmc0 is current device
>>> Scanning mmc 0:1...
>>> starting USB...
>>> USB0: USB EHCI 1.00
>>> USB1: Register 2000140 NbrPorts 2
>>> Starting the controller
>>> USB XHCI 1.00
>>> USB2: Register 2000140 NbrPorts 2
>>> Starting the controller
>>> USB XHCI 1.00
>>> scanning bus 0 for devices... 1 USB Device(s) found
>>> scanning bus 1 for devices... 1 USB Device(s) found
>>> scanning bus 2 for devices... 1 USB Device(s) found
>>> scanning usb for ethernet devices... 0 Ethernet Device(s) found
>>> No ethernet found.
>>> missing environment variable: pxeuuid
>>> missing environment variable: bootfile
>>> -----------------------------------------------------------------------------------------
>>
>> Hi Anand,
>>
>> This looks like it might be the same problem as
>> http://lists.denx.de/pipermail/u-boot/2015-October/230827.html
>>
>> Simon Glass asked if this also happens on XU3, so maybe you could
>> test the same workaround on your board and provide feedback?
>>
>> --
>
> Odroid u3 also has the same problem
> ---------------------------------------------------------
> U-Boot 2015.10-rc5-00030-gac6a532-dirty (Oct 20 2015 - 01:37:27 +1030)
>
> CPU: Exynos4412 @ 1 GHz
> Model: Odroid based on Exynos4412
> Board: Odroid based on Exynos4412
> Model: u3
> DRAM: 2 GiB
> LDO20 at VDDQ_EMMC_1.8V: set 1800000 uV; enabling
> LDO22 at VDDQ_EMMC_2.8V: set 2800000 uV; enabling
> LDO21 at TFLASH_2.8V: set 2800000 uV; enabling
> MMC: SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1
> *** Warning - bad CRC, using default environment
>
> Net: No ethernet found.
> Hit any key to stop autoboot: 0
> Odroid # setenv usbethaddr 02:DE:AD:BE:EF:FF
> Odroid # usb start
> starting USB...
> USB0: USB EHCI 1.00
> scanning bus 0 for devices... 1 USB Device(s) found
> scanning usb for ethernet devices... 0 Ethernet Device(s) found
> Odroid #
> ---------------------------------------------------------
>
> -Anand Moon
>> Best regards,
>> Siarhei Siamashka
>
Lukasz is working on that issue, and he discovered that the sequence of
usb start/reset works for this and the Ethernet is detected then.
-----------------------------------------------------------------------
ODROID-XU3 # usb start
starting USB...
USB0: USB EHCI 1.00
USB1: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.00
USB2: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
scanning bus 1 for devices... 1 USB Device(s) found
scanning bus 2 for devices... 1 USB Device(s) found
scanning usb for ethernet devices... 0 Ethernet Device(s) found
ODROID-XU3 # usb reset
resetting USB...
USB0: USB EHCI 1.00
USB1: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.00
USB2: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.00
scanning bus 0 for devices... 3 USB Device(s) found
scanning bus 1 for devices... 1 USB Device(s) found
scanning bus 2 for devices... 1 USB Device(s) found
scanning usb for ethernet devices...
Error: sms0 address not set.
Warning: failed to set MAC address
1 Ethernet Device(s) found
ODROID-XU3 #
-----------------------------------------------------------------------
Best regards,
--
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marczak at samsung.com
next prev parent reply other threads:[~2015-10-21 10:13 UTC|newest]
Thread overview: 106+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-28 13:59 [U-Boot] [PATCH 0/7] Add board detection for Odroid XU3 / XU3Lite / XU4 Przemyslaw Marczak
2015-08-28 13:59 ` [U-Boot] [PATCH 1/7] s5p: cpu_info: use defined CPU name if available Przemyslaw Marczak
2015-09-01 0:33 ` Simon Glass
2015-09-04 15:04 ` Przemyslaw Marczak
2015-08-28 13:59 ` [U-Boot] [PATCH 2/7] peach-pi: define CPU name for SoC Exynos5800 Przemyslaw Marczak
2015-08-28 13:59 ` [U-Boot] [PATCH 3/7] Exynos5422/5800: set cpu id to 0x5422 Przemyslaw Marczak
2015-09-01 0:33 ` Simon Glass
2015-08-28 13:59 ` [U-Boot] [PATCH 4/7] dm: pmic: add s2mps11 PMIC I/O driver Przemyslaw Marczak
2015-09-01 0:33 ` Simon Glass
2015-09-04 15:04 ` Przemyslaw Marczak
2015-09-07 0:11 ` Minkyu Kang
2015-09-09 10:31 ` Przemyslaw Marczak
2015-08-28 13:59 ` [U-Boot] [PATCH 5/7] odroid-xu3: enable s2mps11 PMIC support Przemyslaw Marczak
2015-09-01 0:33 ` Simon Glass
2015-08-28 13:59 ` [U-Boot] [PATCH 6/7] Exynos: add internal ADC driver Przemyslaw Marczak
2015-09-01 0:33 ` Simon Glass
2015-09-04 15:04 ` Przemyslaw Marczak
2015-08-28 13:59 ` [U-Boot] [PATCH 7/7] exynos5-dt: add board detection for Odroid XU3/XU3L/XU4 Przemyslaw Marczak
2015-09-01 0:33 ` Simon Glass
2015-09-04 15:04 ` Przemyslaw Marczak
2015-08-30 19:03 ` [U-Boot] [PATCH 0/7] Add board detection for Odroid XU3 / XU3Lite / XU4 Anand Moon
2015-08-31 12:17 ` Przemyslaw Marczak
2015-10-21 1:58 ` Siarhei Siamashka
2015-10-21 9:47 ` Anand Moon
2015-10-21 9:57 ` Anand Moon
2015-10-21 10:13 ` Przemyslaw Marczak [this message]
2015-08-31 13:22 ` Simon Glass
2015-08-31 18:29 ` Przemyslaw Marczak
2015-08-31 23:13 ` Simon Glass
2015-09-04 15:04 ` Przemyslaw Marczak
2015-09-21 12:26 ` [U-Boot] [PATCH V2 00/11] " Przemyslaw Marczak
2015-09-21 12:26 ` [U-Boot] [PATCH V2 01/11] samsung: board/misc: check returned pointer for get_board_type() calls Przemyslaw Marczak
2015-10-03 14:27 ` Simon Glass
2015-09-21 12:26 ` [U-Boot] [PATCH V2 02/11] s5p: cpu_info: print "cpu-model" if exists in dts Przemyslaw Marczak
2015-10-03 14:27 ` Simon Glass
2015-10-13 11:57 ` Przemyslaw Marczak
2015-09-21 12:26 ` [U-Boot] [PATCH V2 03/11] Peach-Pi: dts: add cpu-model string Przemyslaw Marczak
2015-10-03 14:28 ` Simon Glass
2015-10-13 11:57 ` Przemyslaw Marczak
2015-09-21 12:26 ` [U-Boot] [PATCH V2 04/11] Exynos5422/5800: set cpu id to 0x5422 Przemyslaw Marczak
2015-09-21 12:47 ` Jaehoon Chung
2015-09-21 13:01 ` Przemyslaw Marczak
2015-09-21 12:26 ` [U-Boot] [PATCH V2 05/11] dm: pmic: add s2mps11 PMIC I/O driver Przemyslaw Marczak
2015-10-03 14:28 ` Simon Glass
2015-10-13 11:57 ` Przemyslaw Marczak
2015-09-21 12:26 ` [U-Boot] [PATCH V2 06/11] dm: adc: add simple ADC uclass implementation Przemyslaw Marczak
2015-10-03 14:28 ` Simon Glass
2015-10-13 11:57 ` Przemyslaw Marczak
2015-09-21 12:26 ` [U-Boot] [PATCH V2 07/11] dm: adc: add Exynos54xx compatible ADC driver Przemyslaw Marczak
2015-10-03 14:28 ` Simon Glass
2015-10-13 11:58 ` Przemyslaw Marczak
2015-10-19 2:20 ` Simon Glass
2015-09-21 12:26 ` [U-Boot] [PATCH V2 08/11] Odroid-XU3: enable s2mps11 PMIC support Przemyslaw Marczak
2015-10-03 14:28 ` Simon Glass
2015-09-21 12:26 ` [U-Boot] [PATCH V2 09/11] Exynos54xx: dts: add ADC node Przemyslaw Marczak
2015-10-03 14:28 ` Simon Glass
2015-09-21 12:26 ` [U-Boot] [PATCH V2 10/11] Odroid-XU3: dts: enable ADC, with request for pre-reloc bind Przemyslaw Marczak
2015-10-03 14:28 ` Simon Glass
2015-09-21 12:26 ` [U-Boot] [PATCH V2 11/11] exynos5-dt-types: add board detection for Odroid XU3/XU3L/XU4 Przemyslaw Marczak
2015-10-03 14:28 ` Simon Glass
2015-10-13 11:59 ` Przemyslaw Marczak
2015-10-19 2:21 ` Simon Glass
2015-09-27 12:20 ` [U-Boot] [PATCH V2 00/11] Add board detection for Odroid XU3 / XU3Lite / XU4 Anand Moon
2015-09-28 10:19 ` Przemyslaw Marczak
2015-10-01 11:07 ` Przemyslaw Marczak
2015-10-03 14:30 ` Simon Glass
2015-10-13 11:59 ` Przemyslaw Marczak
2015-10-27 12:07 ` [U-Boot] [PATCH V3 00/14] " Przemyslaw Marczak
2015-10-27 12:07 ` [U-Boot] [PATCH V3 01/14] samsung: board/misc: check returned pointer for get_board_type() calls Przemyslaw Marczak
2015-10-28 18:50 ` Simon Glass
2015-10-30 3:00 ` Anand Moon
2015-10-27 12:07 ` [U-Boot] [PATCH V3 02/14] s5p: cpu_info: print "cpu-model" if exists in dts Przemyslaw Marczak
2015-10-28 18:50 ` Simon Glass
2015-10-30 3:01 ` Anand Moon
2015-10-27 12:07 ` [U-Boot] [PATCH V3 03/14] Peach-Pi: dts: add cpu-model string Przemyslaw Marczak
2015-10-28 18:50 ` Simon Glass
2015-10-30 3:02 ` Anand Moon
2015-10-27 12:07 ` [U-Boot] [PATCH V3 04/14] Exynos5422/5800: set cpu id to 0x5422 Przemyslaw Marczak
2015-10-30 3:03 ` Anand Moon
2015-10-27 12:07 ` [U-Boot] [PATCH V3 05/14] dm: pmic: add s2mps11 PMIC I/O driver Przemyslaw Marczak
2015-10-28 18:50 ` Simon Glass
2015-10-30 3:04 ` Anand Moon
2015-10-27 12:07 ` [U-Boot] [PATCH V3 06/14] dm: regulator: add function device_get_supply_regulator() Przemyslaw Marczak
2015-11-05 18:25 ` Simon Glass
2015-10-27 12:08 ` [U-Boot] [PATCH V3 07/14] dm: adc: add simple ADC uclass implementation Przemyslaw Marczak
2015-10-27 13:53 ` Przemyslaw Marczak
2015-11-05 18:25 ` Simon Glass
2015-10-27 12:08 ` [U-Boot] [PATCH V3 08/14] dm: adc: add Exynos54xx compatible ADC driver Przemyslaw Marczak
2015-11-06 0:15 ` Simon Glass
2015-10-27 12:08 ` [U-Boot] [PATCH V3 09/14] Odroid-XU3: enable s2mps11 PMIC support Przemyslaw Marczak
2015-10-30 3:09 ` Anand Moon
2015-10-27 12:08 ` [U-Boot] [PATCH V3 10/14] Exynos54xx: dts: add ADC node Przemyslaw Marczak
2015-10-28 18:50 ` Simon Glass
2015-10-29 13:58 ` Przemyslaw Marczak
2015-11-06 3:15 ` Simon Glass
2015-11-06 8:48 ` Przemyslaw Marczak
2015-10-27 12:08 ` [U-Boot] [PATCH V3 11/14] Odroid-XU3: dts: enable ADC, with request for pre-reloc bind Przemyslaw Marczak
2015-10-27 12:08 ` [U-Boot] [PATCH V3 12/14] exynos5-dt-types: add board detection for Odroid XU3/XU3L/XU4 Przemyslaw Marczak
2015-10-30 3:06 ` Anand Moon
2015-10-27 12:08 ` [U-Boot] [PATCH V3 13/14] sandbox: add ADC driver Przemyslaw Marczak
2015-11-04 9:52 ` [U-Boot] [PATCH] Add missing file: include/sandbox-adc.h Przemyslaw Marczak
2015-11-06 12:07 ` Simon Glass
2015-11-06 0:15 ` [U-Boot] [PATCH V3 13/14] sandbox: add ADC driver Simon Glass
2015-10-27 12:08 ` [U-Boot] [PATCH V3 14/14] sandbox: add ADC unit tests Przemyslaw Marczak
2015-11-06 0:15 ` Simon Glass
2015-11-02 5:37 ` [U-Boot] [PATCH V3 00/14] Add board detection for Odroid XU3 / XU3Lite / XU4 Minkyu Kang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56276560.7060908@samsung.com \
--to=p.marczak@samsung.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.