From: Lokesh Vutla <a0131933@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 0/8] ARM: keystone2: Enable OF_CONTROL and DM
Date: Thu, 22 Oct 2015 15:07:55 +0530 [thread overview]
Message-ID: <5628AE73.1030004@ti.com> (raw)
In-Reply-To: <1442655023-15966-1-git-send-email-lokeshvutla@ti.com>
Hi Tom,
On Saturday 19 September 2015 03:00 PM, Lokesh Vutla wrote:
> This patch series enables OF_CONTROL and DM for all keystone platforms.
> In order to add support for OF_CONTROL all the keystone2 specific DT
> files are imported from Linux kernel. For now only DM_SERIAL is enabled
> on all keystone2 platforms, moving forward all other drivers are
> converted to DM and will be enabled in defconfig.
>
> Build targets used:
> UART boot: u-boot-dtb.bin
> NAND boot: MLO
> SPI boot: u-boot-spl.gph
>
> Above three bootmodes are verified on the following platforms:
> K2HK-evm, K2L-evm, K2E-evm.
>
> This patch series is based on top of keystone serial driver posted previously:
> https://www.mail-archive.com/u-boot%40lists.denx.de/msg186443.html
Gentle ping.
Thanks and regards,
Lokesh
>
> Lokesh Vutla (8):
> ARM: keystone2: Fix serial port init
> ARM: keystone2: spl: Fix stack allocation with CONFIG_SYS_MALLOC_F_LEN
> ARM: dts: Keystone2: Import generic dt files from Linux Kernel
> ARM: dts: keystone2: Do not use LPAE addresses in U-Boot
> ARM: dts: k2hk: Enable OF_CONTROL and DM
> ARM: dts: k2l: Enable OF_CONTROL and DM
> ARM: dts: k2e: Enable OF_CONTROL and DM
> ARM: keystone2: Use dtb images by default
>
> arch/arm/dts/Makefile | 4 +
> arch/arm/dts/k2e-clocks.dtsi | 77 +++++++
> arch/arm/dts/k2e-evm.dts | 154 +++++++++++++
> arch/arm/dts/k2e-netcp.dtsi | 206 +++++++++++++++++
> arch/arm/dts/k2e.dtsi | 147 ++++++++++++
> arch/arm/dts/k2hk-clocks.dtsi | 425 +++++++++++++++++++++++++++++++++++
> arch/arm/dts/k2hk-evm.dts | 182 +++++++++++++++
> arch/arm/dts/k2hk-netcp.dtsi | 208 +++++++++++++++++
> arch/arm/dts/k2hk.dtsi | 114 ++++++++++
> arch/arm/dts/k2l-clocks.dtsi | 266 ++++++++++++++++++++++
> arch/arm/dts/k2l-evm.dts | 131 +++++++++++
> arch/arm/dts/k2l-netcp.dtsi | 189 ++++++++++++++++
> arch/arm/dts/k2l.dtsi | 108 +++++++++
> arch/arm/dts/keystone-clocks.dtsi | 414 ++++++++++++++++++++++++++++++++++
> arch/arm/dts/keystone.dtsi | 327 +++++++++++++++++++++++++++
> arch/arm/mach-keystone/config.mk | 4 +-
> arch/arm/mach-keystone/init.c | 2 +
> board/ti/ks2_evm/README | 14 +-
> configs/k2e_evm_defconfig | 5 +
> configs/k2hk_evm_defconfig | 5 +
> configs/k2l_evm_defconfig | 5 +
> include/configs/ti_armv7_keystone2.h | 13 +-
> 22 files changed, 2990 insertions(+), 10 deletions(-)
> create mode 100644 arch/arm/dts/k2e-clocks.dtsi
> create mode 100644 arch/arm/dts/k2e-evm.dts
> create mode 100644 arch/arm/dts/k2e-netcp.dtsi
> create mode 100644 arch/arm/dts/k2e.dtsi
> create mode 100644 arch/arm/dts/k2hk-clocks.dtsi
> create mode 100644 arch/arm/dts/k2hk-evm.dts
> create mode 100644 arch/arm/dts/k2hk-netcp.dtsi
> create mode 100644 arch/arm/dts/k2hk.dtsi
> create mode 100644 arch/arm/dts/k2l-clocks.dtsi
> create mode 100644 arch/arm/dts/k2l-evm.dts
> create mode 100644 arch/arm/dts/k2l-netcp.dtsi
> create mode 100644 arch/arm/dts/k2l.dtsi
> create mode 100644 arch/arm/dts/keystone-clocks.dtsi
> create mode 100644 arch/arm/dts/keystone.dtsi
>
next prev parent reply other threads:[~2015-10-22 9:37 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-19 9:30 [U-Boot] [PATCH 0/8] ARM: keystone2: Enable OF_CONTROL and DM Lokesh Vutla
2015-09-19 9:30 ` [U-Boot] [PATCH 1/8] ARM: keystone2: Fix serial port init Lokesh Vutla
2015-10-22 21:20 ` [U-Boot] [U-Boot,1/8] " Tom Rini
2015-09-19 9:30 ` [U-Boot] [PATCH 2/8] ARM: keystone2: spl: Fix stack allocation with CONFIG_SYS_MALLOC_F_LEN Lokesh Vutla
2015-10-22 21:20 ` [U-Boot] [U-Boot, " Tom Rini
2015-09-19 9:30 ` [U-Boot] [PATCH 3/8] ARM: dts: Keystone2: Import generic dt files from Linux Kernel Lokesh Vutla
2015-10-22 21:20 ` [U-Boot] [U-Boot, " Tom Rini
2015-09-19 9:30 ` [U-Boot] [PATCH 4/8] ARM: dts: keystone2: Do not use LPAE addresses in U-Boot Lokesh Vutla
2015-10-22 21:20 ` [U-Boot] [U-Boot, " Tom Rini
2015-09-19 9:30 ` [U-Boot] [PATCH 5/8] ARM: dts: k2hk: Enable OF_CONTROL and DM Lokesh Vutla
2015-10-22 21:20 ` [U-Boot] [U-Boot,5/8] " Tom Rini
2015-09-19 9:30 ` [U-Boot] [PATCH 6/8] ARM: dts: k2l: " Lokesh Vutla
2015-10-22 21:21 ` [U-Boot] [U-Boot,6/8] " Tom Rini
2015-09-19 9:30 ` [U-Boot] [PATCH 7/8] ARM: dts: k2e: " Lokesh Vutla
2015-10-22 21:21 ` [U-Boot] [U-Boot,7/8] " Tom Rini
2015-09-19 9:30 ` [U-Boot] [PATCH 8/8] ARM: keystone2: Use dtb images by default Lokesh Vutla
2015-10-22 21:21 ` [U-Boot] [U-Boot, " Tom Rini
2015-10-22 9:37 ` Lokesh Vutla [this message]
2015-10-22 11:23 ` [U-Boot] [PATCH 0/8] ARM: keystone2: Enable OF_CONTROL and DM Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5628AE73.1030004@ti.com \
--to=a0131933@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.