From: hl <hl@rock-chips.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v1 12/12] rockchip: Add basic support for evb-rk3036 board
Date: Fri, 23 Oct 2015 10:50:58 +0800 [thread overview]
Message-ID: <5629A092.5030804@rock-chips.com> (raw)
In-Reply-To: <CAPnjgZ1Ts71JQ3YpykPKDR+eA_wBpkT9zMRN_qTNrud7Kvw3Qw@mail.gmail.com>
Hi Simon,
On 23/10/15 09:34, Simon Glass wrote:
> Hi,
>
> On 22 October 2015 at 19:27, hl <hl@rock-chips.com> wrote:
>> Hi Simon,
>>
>>
>> On 22/10/15 22:08, Simon Glass wrote:
>>> On 20 October 2015 at 20:37, Lin Huang <hl@rock-chips.com> wrote:
>>>> This add some basic files required to allow the board to dispaly
>>>> serial message and can run command(mmc info etc)
>>>>
>>>> Signed-off-by: Lin Huang <hl@rock-chips.com>
>>>> ---
>>>> Changes in v1:
>>>> - clean copyright announcement
>>>>
>>>> arch/arm/dts/Makefile | 3 ++-
>>>> arch/arm/dts/rk3036-sdk.dts | 46
>>>> ++++++++++++++++++++++++++++++++
>>>> board/evb_rk3036/evb_rk3036/Kconfig | 15 +++++++++++
>>>> board/evb_rk3036/evb_rk3036/MAINTAINERS | 0
>>>> board/evb_rk3036/evb_rk3036/Makefile | 7 +++++
>>>> board/evb_rk3036/evb_rk3036/evb_rk3036.c | 7 +++++
>>>> configs/evb-rk3036_defconfig | 41
>>>> ++++++++++++++++++++++++++++
>>>> include/configs/evb_rk3036.h | 12 +++++++++
>>>> 8 files changed, 130 insertions(+), 1 deletion(-)
>>>> create mode 100644 arch/arm/dts/rk3036-sdk.dts
>>>> create mode 100644 board/evb_rk3036/evb_rk3036/Kconfig
>>>> create mode 100644 board/evb_rk3036/evb_rk3036/MAINTAINERS
>>>> create mode 100644 board/evb_rk3036/evb_rk3036/Makefile
>>>> create mode 100644 board/evb_rk3036/evb_rk3036/evb_rk3036.c
>>>> create mode 100644 configs/evb-rk3036_defconfig
>>>> create mode 100644 include/configs/evb_rk3036.h
>>>>
>>> Can you also please update doc/README.rockchip with build instructions
>>> and how to get an image onto this board?
>> I try to figure out how to merge binary blob and u-boot-dtb.bin use
>> mkimage,
>> i will update doc/README ASAP when i finish it. And where should the
>> binary blob store?
> Hopefully we don't need the binary block, and u-boot-spl.bin will
> contain all the code needed. There are boards already with tiny SPL
> images.
>
> Then you can just provide instructions on how to build the image,
> perhaps with the 'dd' tool. You don't need to build an entire image in
> the build system - just provide instructions on how someone might put
> the SPL and U-Boot onto an SD card and get it to boot.
Okay, i will implement rk3036 sdram driver first, and try to run it
in SPL,
it may take some times.
> Regards,
> Simon
>
>
>
--
Lin Huang
next prev parent reply other threads:[~2015-10-23 2:50 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-21 2:37 [U-Boot] [PATCH v1 00/12] Bring up rk3036 uboot Lin Huang
2015-10-21 2:37 ` [U-Boot] [PATCH v1 01/12] rockchip: define SUPPORT_SPL and SPL config in RK3288 config Lin Huang
2015-10-22 14:07 ` Simon Glass
2015-10-22 16:01 ` Eddie Cai
2015-10-22 16:30 ` Simon Glass
2015-10-23 0:54 ` Eddie Cai
2015-10-23 1:04 ` Simon Glass
2015-10-23 1:21 ` hl
2015-10-26 4:12 ` Simon Glass
2015-10-27 0:27 ` hl
2015-10-27 19:03 ` Simon Glass
2015-10-23 0:50 ` hl
2015-10-23 0:54 ` Simon Glass
2015-10-21 2:37 ` [U-Boot] [PATCH v1 02/12] rockchip: implement rockchip timer init function Lin Huang
2015-10-22 14:07 ` Simon Glass
2015-10-21 2:37 ` [U-Boot] [PATCH v1 03/12] rockchip: serial driver support rk3036 Lin Huang
2015-10-22 14:07 ` Simon Glass
2015-10-23 0:51 ` hl
2015-10-21 2:37 ` [U-Boot] [PATCH v1 04/12] rockchip: Bring in RK3036 device tree file includes and bindings Lin Huang
2015-10-22 14:07 ` Simon Glass
2015-10-21 2:37 ` [U-Boot] [PATCH v1 05/12] rockchip: rk3036: Add clock driver Lin Huang
2015-10-22 14:07 ` Simon Glass
2015-10-23 0:56 ` hl
2015-10-21 2:37 ` [U-Boot] [PATCH v1 06/12] rockchip: rk3036: Add header files for GRF Lin Huang
2015-10-22 14:07 ` Simon Glass
2015-10-21 2:37 ` [U-Boot] [PATCH v1 07/12] rockchip: rk3036: Add Soc reset driver Lin Huang
2015-10-22 14:07 ` Simon Glass
2015-10-21 2:37 ` [U-Boot] [PATCH v1 08/12] rockchip: rk3036: Add a simple syscon driver Lin Huang
2015-10-22 14:08 ` Simon Glass
2015-10-21 2:37 ` [U-Boot] [PATCH v1 09/12] rockchip: rk3036: Add pinctrl driver Lin Huang
2015-10-22 14:08 ` Simon Glass
2015-10-21 2:37 ` [U-Boot] [PATCH v1 10/12] rockchip: Add an rk3036 MMC driver Lin Huang
2015-10-22 14:08 ` Simon Glass
2015-10-23 1:03 ` hl
2015-10-21 2:37 ` [U-Boot] [PATCH v1 11/12] rockchip: rk3036: Add core Soc start-up code Lin Huang
2015-10-22 14:08 ` Simon Glass
2015-10-21 2:37 ` [U-Boot] [PATCH v1 12/12] rockchip: Add basic support for evb-rk3036 board Lin Huang
2015-10-22 14:08 ` Simon Glass
2015-10-23 1:27 ` hl
2015-10-23 1:34 ` Simon Glass
2015-10-23 2:50 ` hl [this message]
2015-10-23 2:53 ` Simon Glass
-- strict thread matches above, loose matches on Subject: below --
2015-10-21 5:37 [U-Boot] [PATCH v1 00/12] Bring up rk3036 uboot Lin Huang
2015-10-21 5:37 ` [U-Boot] [PATCH v1 12/12] rockchip: Add basic support for evb-rk3036 board Lin Huang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5629A092.5030804@rock-chips.com \
--to=hl@rock-chips.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.