Hi Jassi, Thanks for your comments. 在 2015年10月06日 19:35, Jassi Brar 写道: > On Mon, Sep 14, 2015 at 4:36 PM, Caesar Wang wrote: >> This driver is found on RK3368 SoCs. >> >> The Mailbox module is a simple APB peripheral that allows both >> the Cortex-A53 MCU system to communicate by writing operation to >> generate interrupt. >> The registers are accessible by both CPU via APB interface. >> >> The Mailbox has the following main features: >> >> @ Support dual-core system: Cortex-A53 and MCU. >> @ Support APB interface. >> @ Support four mailbox elements, each element includes one data word, one >> command word register and one flag bit that can represent one interrupt. >> @ Four interrupts to Cortex-A53. >> @ Four interrupts to MCU. >> @ Provide 32 lock registers for software to use to indicate whether mailbox >> is occupied. >> >> Signed-off-by: Caesar Wang >> --- >> >> drivers/mailbox/Kconfig | 9 ++ >> drivers/mailbox/Makefile | 2 + >> drivers/mailbox/rockchip-mailbox.c | 317 +++++++++++++++++++++++++++++++++++++ >> 3 files changed, 328 insertions(+) >> create mode 100644 drivers/mailbox/rockchip-mailbox.c >> >> diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig >> index bbec500..a548d700 100644 >> --- a/drivers/mailbox/Kconfig >> +++ b/drivers/mailbox/Kconfig >> @@ -43,6 +43,15 @@ config OMAP_MBOX_KFIFO_SIZE >> This can also be changed at runtime (via the mbox_kfifo_size >> module parameter). >> >> +config ROCKCHIP_MBOX >> + bool "Rockchip Soc Intergrated Mailbox Support" >> + depends on ARCH_ROCKCHIP >> + help >> + This driver provides support for inter-processor communication >> + between CPU cores and MCU processor on Some Rockchip SOCs. >> + Please check it that the Soc you use have Mailbox hardware. >> + Say Y here if you want to use the Rockchip Mailbox support. >> + >> config PCC >> bool "Platform Communication Channel Driver" >> depends on ACPI >> diff --git a/drivers/mailbox/Makefile b/drivers/mailbox/Makefile >> index 8e6d822..730cb5d 100644 >> --- a/drivers/mailbox/Makefile >> +++ b/drivers/mailbox/Makefile >> @@ -8,6 +8,8 @@ obj-$(CONFIG_PL320_MBOX) += pl320-ipc.o >> >> obj-$(CONFIG_OMAP2PLUS_MBOX) += omap-mailbox.o >> >> +obj-$(CONFIG_ROCKCHIP_MBOX) += rockchip-mailbox.o >> + >> obj-$(CONFIG_PCC) += pcc.o >> >> obj-$(CONFIG_ALTERA_MBOX) += mailbox-altera.o >> diff --git a/drivers/mailbox/rockchip-mailbox.c b/drivers/mailbox/rockchip-mailbox.c >> new file mode 100644 >> index 0000000..715ab96 >> --- /dev/null >> +++ b/drivers/mailbox/rockchip-mailbox.c >> @@ -0,0 +1,317 @@ >> +/* >> + * Copyright (c) 2015, Fuzhou Rockchip Electronics Co., Ltd >> + * >> + * Authors: Addy Ke >> + * Caesar Wang >> + * >> + * This program is free software; you can redistribute it and/or modify it >> + * under the terms and conditions of the GNU General Public License, >> + * version 2, as published by the Free Software Foundation. >> + * >> + * This program is distributed in the hope it will be useful, but WITHOUT >> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or >> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for >> + * more details. >> + */ >> + >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> + >> +#define MAILBOX_A2B_INTEN 0x00 >> +#define MAILBOX_A2B_STATUS 0x04 >> +#define MAILBOX_A2B_CMD(x) (0x08 + (x) * 8) >> +#define MAILBOX_A2B_DAT(x) (0x0c + (x) * 8) >> + >> +#define MAILBOX_B2A_INTEN 0x28 >> +#define MAILBOX_B2A_STATUS 0x2C >> +#define MAILBOX_B2A_CMD(x) (0x30 + (x) * 8) >> +#define MAILBOX_B2A_DAT(x) (0x34 + (x) * 8) >> + >> +#define MAILBOX_ATOMIC_LOCK(x) (0x100 + (x) * 8) >> + >> +/* A2B: 0 - 2k */ >> +#define A2B_BUF(size, idx) ((idx) * (size)) >> + >> +/* B2A: 2k - 4k */ >> +#define B2A_BUF(size, idx) (((idx) + 4) * (size)) >> + >> +struct rockchip_mbox_msg { >> + u32 cmd; >> + int tx_size; >> + void *tx_buf; >> + int rx_size; >> + void *rx_buf; >> + void *cl_data; >> +}; >> + >> +struct rockchip_mbox_data { >> + int num_chans; >> +}; >> + >> +struct rockchip_mbox_chan { >> + int idx; >> + int irq; >> + struct rockchip_mbox_msg *msg; >> + struct rockchip_mbox *mb; >> +}; >> + >> +struct rockchip_mbox { >> + struct mbox_controller mbox; >> + struct clk *pclk; >> + void __iomem *mbox_base; >> + >> + /* The base address of share memory to transfer data */ >> + void __iomem *buf_base; >> + >> + /* The maximum size of buf for each channel */ >> + u32 buf_size; >> + >> + struct rockchip_mbox_chan *chans; >> +}; >> + >> +static inline int chan_to_idx(struct rockchip_mbox *mb, >> + struct mbox_chan *chan) >> +{ >> + return (chan - mb->mbox.chans); >> +} > perhaps you intended rockchip_mbox_chan.idx for this purpose? > Done, Fixed in next version v1. >> +static int rockchip_mbox_send_data(struct mbox_chan *chan, void *data) >> +{ >> + struct rockchip_mbox *mb = dev_get_drvdata(chan->mbox->dev); >> + struct rockchip_mbox_msg *msg = data; >> + int idx = chan_to_idx(mb, chan); >> + >> + if (!msg) >> + return -EINVAL; >> + >> + if ((msg->tx_size > mb->buf_size) || >> + (msg->rx_size > mb->buf_size)) { >> + dev_err(mb->mbox.dev, "Transmit size over buf size(%d)\n", >> + mb->buf_size); >> + return -EINVAL; >> + } >> + >> + dev_dbg(mb->mbox.dev, "Chan[%d]: A2B message, cmd 0x%08x\n", >> + idx, msg->cmd); >> + >> + mb->chans[idx].msg = msg; >> + >> + if (msg->tx_buf) >> + memcpy(mb->buf_base + A2B_BUF(mb->buf_size, idx), >> + msg->tx_buf, msg->tx_size); >> + > as I said on the bindings patch, this should be done by client driver > in tx_prepare() callback. Okay, so I should do that in client driver since I'm ready sent the client driver with scpi protocol, I found the similar driver in LKML. mailbox: add support for System Control and Power Interface(SCPI) protocol https://patchwork.kernel.org/patch/6279371/ I will pick up this driver with my client driver for later or another patchs. >> + writel_relaxed(msg->cmd, mb->mbox_base + MAILBOX_A2B_CMD(idx)); >> + writel_relaxed(msg->rx_size, mb->mbox_base + MAILBOX_A2B_DAT(idx)); >> + > Usually length of payload is not specified via mailbox registers but > we have to live with what your protocol does... so maybe keep rx_size > in rockchip_mbox_msg but remove tx_size, tx_buf, void *rx_buf, and > cl_data Done. > >> + return 0; >> +} >> + >> +static int rockchip_mbox_startup(struct mbox_chan *chan) >> +{ >> + return 0; >> +} > maybe request the channel irq in startup and release in shutdown ? Here, I think the devm_request_threaded_irq() can also put in probe(), And I change the enable/disable interrupts for startup/shundown. > _______________________________________________ > Linux-rockchip mailing list > Linux-rockchip@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-rockchip -- Thanks, Caesar