From: Dinh Nguyen <dinguyen@opensource.altera.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2] arm: socfpga: Add SoCFPGA SR1500 board
Date: Tue, 27 Oct 2015 10:29:24 -0500 [thread overview]
Message-ID: <562F9854.9070706@opensource.altera.com> (raw)
In-Reply-To: <1445848611-5632-1-git-send-email-sr@denx.de>
Hi Stefan,
On 10/26/2015 03:36 AM, Stefan Roese wrote:
> The SR1500 board is a CycloneV based board, similar to the EBV
> SoCrates, equipped with the following devices:
>
> - SPI NOR
> - eMMC
> - Ethernet
>
> Signed-off-by: Stefan Roese <sr@denx.de>
> Cc: Marek Vasut <marex@denx.de>
> Cc: Pavel Machek <pavel@denx.de>
> Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
> ---
> v2:
> - Addressed various review comments from Marek:
> - Added chapter about SPL integration for SoC FPGA in doc/README.socfpga
> - Delay after PHY reset deassertion added
> - Reshuffle of the code for the PHY test code (fixes and cleanup)
> - Cleanup of the board config header
>
> arch/arm/dts/Makefile | 4 +-
> arch/arm/dts/socfpga_cyclone5_sr1500.dts | 101 +++++
> arch/arm/mach-socfpga/Kconfig | 6 +
> board/sr1500/MAINTAINERS | 6 +
> board/sr1500/Makefile | 7 +
> board/sr1500/qts/iocsr_config.h | 660 +++++++++++++++++++++++++++++++
> board/sr1500/qts/pinmux_config.h | 219 ++++++++++
> board/sr1500/qts/pll_config.h | 85 ++++
> board/sr1500/qts/sdram_config.h | 341 ++++++++++++++++
> board/sr1500/socfpga.c | 151 +++++++
> configs/socfpga_sr1500_defconfig | 17 +
> doc/README.socfpga | 74 +++-
> include/configs/socfpga_sr1500.h | 113 ++++++
> 13 files changed, 1782 insertions(+), 2 deletions(-)
> create mode 100644 arch/arm/dts/socfpga_cyclone5_sr1500.dts
> create mode 100644 board/sr1500/MAINTAINERS
> create mode 100644 board/sr1500/Makefile
> create mode 100644 board/sr1500/qts/iocsr_config.h
> create mode 100644 board/sr1500/qts/pinmux_config.h
> create mode 100644 board/sr1500/qts/pll_config.h
> create mode 100644 board/sr1500/qts/sdram_config.h
> create mode 100644 board/sr1500/socfpga.c
> create mode 100644 configs/socfpga_sr1500_defconfig
> create mode 100644 include/configs/socfpga_sr1500.h
>
> diff --git a/include/configs/socfpga_sr1500.h b/include/configs/socfpga_sr1500.h
> new file mode 100644
> index 0000000..def01fb
> --- /dev/null
> +++ b/include/configs/socfpga_sr1500.h
> @@ -0,0 +1,113 @@
> +/*
> + * Copyright (C) 2015 Stefan Roese <sr@denx.de>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +#ifndef __CONFIG_SOCFPGA_SR1500_H__
> +#define __CONFIG_SOCFPGA_SR1500_H__
> +
> +#include <asm/arch/socfpga_base_addrs.h>
> +
> +#define CONFIG_BOARD_EARLY_INIT_F
> +
> +#define CONFIG_SYS_NO_FLASH
> +#define CONFIG_DOS_PARTITION
> +#define CONFIG_FAT_WRITE
> +
> +#define CONFIG_HW_WATCHDOG
> +
> +/* U-Boot Commands */
> +#define CONFIG_CMD_ASKENV
> +#define CONFIG_CMD_BOOTZ
> +#define CONFIG_CMD_CACHE
> +#define CONFIG_CMD_DHCP
> +#define CONFIG_CMD_EXT4
> +#define CONFIG_CMD_EXT4_WRITE
> +#define CONFIG_CMD_FAT
> +#define CONFIG_CMD_FS_GENERIC
> +#define CONFIG_CMD_GPIO
> +#define CONFIG_CMD_GREPENV
> +#define CONFIG_CMD_MEMTEST
> +#define CONFIG_CMD_MII
> +#define CONFIG_CMD_MMC
> +#define CONFIG_CMD_PING
> +#define CONFIG_CMD_SF
> +#define CONFIG_CMD_SPI
> +#define CONFIG_CMD_TIME
> +
> +/* Memory configurations */
> +#define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on SR1500 */
> +
> +/* Booting Linux */
> +#define CONFIG_BOOTDELAY 3
> +#define CONFIG_BOOTFILE "uImage"
> +#define CONFIG_BOOTARGS "console=ttyS0" __stringify(CONFIG_BAUDRATE)
> +#define CONFIG_BOOTCOMMAND "run mmcload; run mmcboot"
> +#define CONFIG_LOADADDR 0x8000
All of the other boards have switched to use 0x01000000 as the LOADADDR.
Dinh
next prev parent reply other threads:[~2015-10-27 15:29 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-23 7:26 [U-Boot] [PATCH] arm: socfpga: Allow board specific config values for env Stefan Roese
2015-10-23 7:26 ` [U-Boot] [PATCH] arm: socfpga: Add CONFIG_BUILD_TARGET to socfpga_common.h Stefan Roese
2015-10-23 18:26 ` Marek Vasut
2015-10-23 7:26 ` [U-Boot] [PATCH] arm: socfpga: Add SoCFPGA SR1500 board Stefan Roese
2015-10-23 18:40 ` Marek Vasut
2015-10-26 8:17 ` Stefan Roese
2015-10-26 20:32 ` Marek Vasut
2015-10-26 8:36 ` [U-Boot] [PATCH v2] " Stefan Roese
2015-10-27 15:29 ` Dinh Nguyen [this message]
2015-10-28 17:45 ` Marek Vasut
2015-11-02 12:26 ` [U-Boot] [PATCH v3] " Stefan Roese
2015-11-02 18:44 ` Marek Vasut
2015-11-18 10:06 ` [U-Boot] [PATCH v4] " Stefan Roese
2015-11-19 15:38 ` Pavel Machek
2015-10-23 18:25 ` [U-Boot] [PATCH] arm: socfpga: Allow board specific config values for env Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=562F9854.9070706@opensource.altera.com \
--to=dinguyen@opensource.altera.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.